• 제목/요약/키워드: image appearance

검색결과 862건 처리시간 0.032초

가시광선중합화에 따른 충전용 Glass Ionomer Cement의 물리적 성질에 관한 연구 (A STUDY ON THE PHYSICAL PROPERTIES OF GLASS IONOMER CEMENT FOR RESTORATIVE FILLING USING VISIBLE LIGHT POLYMERIZATION)

  • 신동훈;권혁춘
    • Restorative Dentistry and Endodontics
    • /
    • 제17권2호
    • /
    • pp.307-330
    • /
    • 1992
  • The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.

  • PDF

전기주석도금 반응에 미치는 PSA계 도금용액 노화의 영향 (Influence of Electrolyte Aging on Electrotinning in Phenolsulfonic Acid Bath)

  • 배대철;김태엽;조준형;이재륭;장삼규;조경목
    • 전기화학회지
    • /
    • 제3권3호
    • /
    • pp.162-168
    • /
    • 2000
  • 전기주석도금용 PSA(Phenolsulfonic Acid Bath)계 전기주석 도금액은 장기간 사용하면 노화되어 도금 전류밀도 범위 축소 및 표면특성 열화현상이 일어나게 된다. 본 연구에서는 도금액 노화 현상의 원인을 축적된 phenolsulfonate농도 증가의 관점에서 조사하였다. 동전위와 정전위 분극실험 결과에서는, phenolsulfonate축적농도 증가에 따른 도금액의 노화 정도가 증가함에 따라 음극분극 초기에 나타나는 한계전류밀도가 점차 낮아지는 현상이 나타났다. Sodium phenolsulfonate를 첨가하여 phenolsulfonate끼 농도만을 조절한 도금액에서도 노화된 도금액과 거의 비슷한 분극 특성이 나타남으로써 도금액 노화의 원인이 축적된 phenolsulfonate임을 간접적으로 확인할 수 있었다. 또한 도금액의 온도가 증가할수록 한계전류밀도가 뚜렷하게 나타나지 않고 도금액 노화에 따른 영향이 적어져서 도금액의 노화는 물질이동과 같은 thermally-activated process의 제약에 의한 것이며, phenolsulfonate가 축적되면서 주석 이온의 mobility를 감소시키고, 따라서 정상적인 도금 반응이 억제되는 것으로 판단된다.

자녀를 둔 어머니의 출산과정 경험 (An Ethnographic Research Study on Childbearing Process of Mother with Children in Korea)

  • 김영희
    • 여성건강간호학회지
    • /
    • 제7권3호
    • /
    • pp.271-283
    • /
    • 2001
  • The childbearing process is a sociocultural phenomenon of a woman who gives birth to a child as well as a biological phenomenon. The purpose of this ethnographic research study was to explore the experience of childbearing process of mothers with children from pregnancy to the 3 months postpartum in Korea and to understand deeply the perspectives of childbearing women reflected on Korean sociocultural values. A convenient sample of 10 childbearing women were observed from January to October 2000 through field work in Seoul, Korea. Data analysis was accomplished under ongoing process. The results of this study were as follows : The mothers with children experienced self-reflection, family relation, and physical adaptation during pregnancy. In self-reflection, all mothers experienced universality and diversity in their self-discovering process. The universal experiences were maturation, life with family and priority on maternal value between being a mother and a woman. The diverse experiences were taking a dual role of working mother, emotional drift of a resigned mother, and disheartened life of a mother who has two daughters. In family relation, the foundation of the new marital relationship were attained during childbearing process and sexual life were changed for the benefit of a healthy mother and a healthy baby. All mothers established friendly relations with their mothers, but established friendly or conflicting or constraining relations with their mother-in-laws due to husband based family culture. In physical adaptation, the informants endured well the physical discomfort and recognized general appearance change. Also maternal-fetal interaction occurred and mothers realistically felt motherhood and accepted themselves as mother-to-be. The mothers prepared for the best delivery, look for a safe childbirth center, newborn goods, endorsed family coping during hospitalization and responded labor pain to make it more endurable, less painful, fast passed owing to labor recognition of the natural process to be a mother. After childbirth, they felt emancipation, satisfaction, accomplishment, more easiness, actually feeling as mother-to-be, emptiness, and showed response to the sex of newborn. Their Sanhujori practice was different according to the Sanhujori environment including provider, place, time in postpartum and reflected on Sanhubyung. The mothers felt actually mother-to-be and happiness during lactation regardless of feeding pattern. These mothers had a different maternal image about rearing subjecthood through their child-rearing experience. But all mothers felt need for family support and social support. The universal rearing response were actual feeling of mother-to-be, a strenuous experience, a pride on child-rearing, confusion, reflecting marital relationship, and wondering rivalry among children. In conclusion, mother of all with children went through self-discovery, self-reflection and made connections with the family as a mother and as a woman simultaneously during the childbearing process. Therefore it is suggested when harmony and balance between a mother and a woman is accomplished, the woman will lead a healthy and high quality of life. Also, this study sought to confirm the sociocultural factors affecting the childbearing process from the perspectives of the women with children. Therefore health care providers must understand deeply the childbearing women with children based on this finding of and try a integrative approach with new ideology of maternity with biocultural perspectives in a clinical setting.

  • PDF

규방문화 침선구의 조형성을 활용한 장신구 작품 연구 (A Study on Personal Ornaments Arts by utilizing Formative Characteristics of Sewing Kits of Gybang Culture)

  • 이재호;박승철
    • 디지털융복합연구
    • /
    • 제10권7호
    • /
    • pp.237-243
    • /
    • 2012
  • 인류는 끊임없이 도구를 만들어 사용하였다. 이것은 인류의 역사가 창조적으로 유지되고 발달되어 왔다는 것을 말한다. 인간은 보다 더 나은 삶을 영위하기 위하여 문명적 발전과 더불어 미적 욕구의 충족을 위한 조형성 추구 등 문화적 개발에도 끊임없이 노력해 왔다. 규방용품은 지극히 여성적이고 한국적인 정서를 담고 있으며 한 문화, 예술의 한 장르로서도 평가 되고 있다. 규방공예는 당시의 사회적, 문화적, 종교적 배경을 바탕으로 독자적이고 독특한 조형미를 형성되어 있으며, 여인들의 벗이라고 할 수 있는 침선구는 연인들의 희 노 애 락 속에서 삶의 모습과 정신세계가 문화적 깊이를 갖는 예술적 정서를 나타내고 있다. 여인들의 시대적 삶의 바탕으로 동고동락했던 침선구의 조형적 이미지, 융합적 결합 및 조화를 통한 장신구로 연관하여 재현시킴으로써 보다 구체적이고 현대적인 감각을 표현할 수 있으리라 의도하여 출발 그 가능성을 다각적으로 모색코자 하였다. 이와 같이 여인의 체취와 정신적 염원이 담긴 규방용품 중 침선구 중심으로 그 특성과 조형성, 융합적 조화, 단아함, 섬세함, 미적 아름다움을 재발견하고 전통 문화 예술의 우수성과 미적 가치를 장신구로 재인식 할 수 있는 계기가 되길 기대한다.

멀티미디어 리터러시 교육의 학습효과 연구 (A Study on the Learning Effect of Multimedia Literacy Education)

  • 정경열
    • 문화기술의 융합
    • /
    • 제6권1호
    • /
    • pp.63-68
    • /
    • 2020
  • 최근 급격한 미디어의 변화에 따라 이에 부합하는 리터러시 교육의 필요성이 증가하고 있다. 하지만 증가하는 필요성에 비해 리터러시의 효율성에 대한 충분한 연구가 이뤄지지 않았던 것이 사실이다. 예를 들면 통합적 미디어 리터러시가 청소년 학습에 미치는 효과에 대한 연구와 같은 실증적 접근 등을 들 수 있겠다. 이에 본 논문은 기존 영상교육과는 차별화되는 멀티미디어 교육을 연구대상으로 삼고 청소년들에게 텍스트와 비디오와 사운드 등을 융합한 교육에 대한 결과를 학습 효과적 측면에서 연구했다. 멀티미디어 교육이 과연 청소년들의 학습에 긍정적 영향을 미치는 지에 대한 학문적 탐구다. 연구방법으로 양적 조사와 질적 조사를 병행한 결과, 멀티미디어 교육은 학습능력 향상에 유의미하다는 결론을 얻었으며 이를 바탕으로 멀티미디어를 활용한 교육으로 언어 교육과 같은 외연 확대와 동시에 실습 위주의 학습자 참여 교육을 제시했다. 이와 같은 여러 가지 교육정책에 대한 제언은 멀티미디어 교육이 단지 기존교육의 보조수단이 아니라 전인적 인격을 달성하는 교육의 핵심으로서 모든 학습활동의 중심으로 자리할 수 있다는 자신감으로 확산될 것이다.

모바일 기술 및 웹을 활용한 콘크리트 품질시험 및 문서관리 시스템 개발 (Development of Concrete Quality Inspection and Document Management System Using Mobile and Web Technologies)

  • 김영석;이재권;정운석
    • 한국건설관리학회논문집
    • /
    • 제9권4호
    • /
    • pp.193-205
    • /
    • 2008
  • 공동주택 습식 공사의 주 재료인 콘크리트는 불량 발생 시 시공 후 개선이 어려울 뿐만 아니라 부실공사로 인한 건물 붕괴 등 대형 사고의 원인이 될 수 있으므로 콘크리트 품질시험의 중요성은 매우 크다고 할 수 있다. 콘크리트 품질시험은 크게 품질시험 관리 조직이 수행하는 시험업무와 문서관리 업무로 구분된다. 콘크리트 품질시험 업무 후 발생되는 정보 및 문서의 양이 과다하고, 결재 시 잦은 이동을 해야 하는 비효율적인 업무 프로세스는 품질 관리원기 업무량을 증가시키므로 품질시험 업무의 투명성 및 품질 이력 데이터의 신뢰성을 저하시키는 문제점을 지니고 있다. 본 연구에서는 최근 급속도로 발전하고 있는 정보기술을 콘크리트 품질시험 분야에 활용하여 품질시험 시 발생되는 정보를 수집하고, 품질시험 관련 문서관리 업무를 효율적으로 수행할 수 있도록 지원하는 PDA 및 웹 기반 품질시험 관리 시스템의 프로토타입을 제시하고자 한다. 본 연구는 품질시험 관련 조직의 업무량을 절감시키고 품질시험을 적시에 수행할 수 있도록 함으로써 품질시험 업무의 투명성 및 품질 이력 데이터의 신뢰성을 향상시킬 수 있을 것으로 기대된다.

A research on the possibility of restoring cultural assets of artificial intelligence through the application of artificial neural networks to roof tile(Wadang)

  • Kim, JunO;Lee, Byong-Kwon
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권1호
    • /
    • pp.19-26
    • /
    • 2021
  • 역사적 지역에서 발굴되는 문화재는 시대적 배경을 바탕으로 고유의 특징을 가지고 있으며, 역사와 전파 지역의 흐름에 따라 그 문양과 특징이 조금씩 변화하는 것을 볼 수 있다. 어떤 지역에서 발굴된 문화재는 그 당시의 문화를 대표하며 온전한 모습을 유지하는 것도 있지만, 대부분이 파손/손실되거나 일부분으로 나누어져 그 구성을 연구하고 파손된 부분을 복구하기 위해 많은 전문가가 동원된다. 이 연구의 목적은 이러한 복원연구에 인공지능 신경망을 통해 과거의 문양과 패턴들을 학습시키고, 출토된 문화재에서 손실된 부분을 복원시키는 데 있으며, 문화재를 복원하기 위해 기본적인 생성적 적대 신경망인 GAN(Generative Adversarial Network)[1]을 사용한다. 연구에서는 GAN을 기반으로 출토된 문화재 일부를 기반으로 하여 손상/손실된 나머지 부분을 복구한 연구 과정으로, 학습에 기반이 되는 온전한 문화재의 이미지로 훈련을 하고, 일부를 마음대로 손상해 복구할 수 있도록 했다. 연구는 문화재 복구에 있어, 시대적 특징을 어느 정도 복구하는지, 색상과 재질을 복구하는지에 중점을 두고 있다. 마지막으로는 실제 출토된 비슷한 문화재를 기반으로 훈련된 신경망을 사용하여 문양을 복구함으로써 인공신경망의 적용 범위를 연구한다.

막걸리 첨가량을 달리한 증편의 품질 특성 (Quality characteristics of Jeung-pyun with different amount of Makgeolli)

  • 김진성;최진희;최해연
    • 한국식품과학회지
    • /
    • 제54권2호
    • /
    • pp.196-202
    • /
    • 2022
  • 본 연구에서는 증편의 발효효모의 급원인 막걸리의 첨가량을 달리하여(50, 100, 150, 200 mL) 증편의 품질 특성과 관능적 특성을 평가하고 증편제조 표준화의 기초자료를 제시하고자 하였다. 막걸리 첨가량을 달리한 증편의 수분함량은 막걸리의 첨가량에 따른 수분함량의 유의적인 차이는 나타나지 않았다. 반죽과 증편의 pH는 발효가 진행됨에 따라 감소하다가 증숙 후 증가하는 경향을 나타내었으며, 막걸리 첨가량이 증가함에 따라 감소하였다. 증편의 L값은 막걸리의 첨가량이 증가할수록 감소하였고, a값은 막걸리 첨가량에 따른 유의적인 차이는 나타나지 않았으며, b값은 막걸리의 첨가량이 증가할수록 증가하였다. 증편의 비체적은 막걸리 첨가량이 증가할수록 증가하다가 M-150에서 최대치를 나타내었으며, 증편의 팽창률은 M-200이 가장 낮게 측정되었고 M-200을 제외한 다른 군간의 유의적인 차이는 나타나지 않았다. 기공수는 막걸리의 첨가량이 증가할수록 감소하였고, 기공의 크기는 막걸리 첨가량이 증가함에 따라 증가하였다. 증편의 경도는 막걸리의 첨가량이 증가함에 따라 감소하였다. 부착성(Adhesiveness)은 M-50의 부착성이 가장 크게 측정되었다. 증편의 탄력성(Springness)과 응집성(Cohesiveness)은 막걸리의 첨가량이 증가함에 따라 증가하였으며, 씹힘성은 막걸리의 첨가량이 증가함에 따라 증가하는 경향을 나타내었다. 검성은 막걸리의 첨가량이 증가함에 따라 감소하였다. 증편의 관능평가 결과 M-150이 검사를 실시한 모든 항목에서 가장 높은 점수를 나타내었다. 결론적으로, M-150군의 배합 비율로 증편을 제조하면 증편 내부의 기공형성이 가장 잘 이루어지고 특유의 식감과 향미를 부여하며, 이는 품질 특성 및 기호도에도 가장 바람직한 영향을 줄 것으로 사료된다. 또한, 본 연구는 향후 쌀 소비 촉진을 위한 다양한 증편연구에 기여할 수 있는 기초자료가 될 것으로 생각된다.

심미치의학 영역에서 동적 교합을 나타내는 가상 환자의 형성을 통한 전치부 보철 수복 증례 (Creation of the dental virtual patients with dynamic occlusion and its application in esthetic dentistry)

  • 안세준;신수연;최유성
    • 대한치과보철학회지
    • /
    • 제60권2호
    • /
    • pp.222-230
    • /
    • 2022
  • 디지털 기술은 점차 그 영역을 넓혀 치의학의 여러 분야에 큰 영향을 미치고 있다. 최근 디지털 치의학에서는 다양한 삼차원적(3D) 이미지 데이터를 하나로 중첩시켜 진단 및 보철물 제작에 활용하는 것의 중요성이 대두되고 있다. 안면 스캔, 구내 스캔, 하악 운동 기록(mandibular movement recording) 등의 데이터를 통합하면 가상 환자 모델을 구성할 수 있다. 가상 환자(Virtual patient)란 구내 및 구외 연조직, 잔존 치열, 동적 교합 등 디지털 3D 진단 데이터를 통합하여 형성되며 이를 통해 보철 치료의 결과 등을 가상으로 시뮬레이션을 시행할 수 있다. 본 증례에서의 환자는 37세 여성 및 55세 여성 환자로 각각 기존 보철물의 외형이 틀어진 것 같다는 주소와 근관치료 후 전치부 보철물의 재제작을 주소로 내원하였다. 각 환자에서 3D 안면 스캔을 채득하였으며, ARCUS Digma 2 (KaVo Dental GmbH, Biberach an der Riss, Germany)를 통해 환자의 하악 운동을 기록하였다. 수집한 데이터를 computer-aided design (CAD) 소프트웨어(Exocad dental CAD; exocad GmbH, Darmstadt, Germany) 상에서 하나로 통합하여 가상 교합기에 옮겨 디지털 가상 환자를 형성하였다. 이를 통해 임시 고정성 보철물을 디자인하고 수복하여 평가하였으며, 최종수복물로 옮겨 심미적, 기능적으로 만족할 만한 결과를 보였기에 이를 보고하고자 한다.

살리실릭애씨드 및 카프릴로일살리실릭애씨드가 적용된 투명 클렌징 워터의 개발 (Development of Transparent Cleansing Water with Salicylic Acid and Capryloyl Salicylic Acid)

  • 여혜림;박인정;정소영;이소민;김형묵;이미기;곽병문;빈범호
    • 대한화장품학회지
    • /
    • 제48권2호
    • /
    • pp.87-95
    • /
    • 2022
  • 본 연구는 베타 하이드록시애씨드(beta-hydroxy acid, BHA)인 살리실릭애씨드와 지방족 하이드록시애씨드(lipo-hydroxy acid, LHA) 중 하나인 카프릴로일살리실릭애씨드(capryloyl salicylic acid)가 적용된 투명한 외관의 클렌징 워터 제품 개발에 관한 것이다. 에탄올, 폴리올 및 소듐 하이드록사이드를 이용하여 지용성인 살리실릭애씨드와 카프릴로일살리실릭애씨드의 물에 대한 용해도를 상승시킨 후 2 종류의 PEG 계면활성제의 이중 마이셀 구조를 이용하여 현탁 및 석출 현상을 보완함으로써 투명 외관을 안정화하였다. 이러한 기술이 적용된 클렌징 워터를 개발하였고 광학 카메라와 이미지 분석기를 이용하여 메이크업 세정 능력과 피부결 개선 능력을 확인하였다. 본 연구에서 소개된 가용화 기술은 물에 대한 용해도가 낮아 그동안 적용이 어려운 LHA의 새로운 접근 방식으로 제안하며 새로운 화학적 필링 제품 개발에 도움이 될 것으로 기대된다.