• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.88-91
• /
• 2008

The COMS IMPS (Communication Ocean and Meteorological Satellite IMage Pre-processing Subsystem) is developed for image pre-processing of COMS. For a test of the COMS IMPS, 7 support software are developed in KARI GS using simulated MI/GOCI WB (Wide-Band) data; COMS Fill Adder, MI (Meteorological Imager) CADU generator, GOCI (Geostationary Ocean Colour Imager) CADU generator, COMS CADU combiner, MI SD (Sensor Data) analyzer, GOCI SD analyzer, and COMS DM (Decomposition Module) test harness. This paper explains functions of developed support software and the COMS IMPS test using those software.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.141-147
• /
• 2014

Purpose: Dental casting #Gr I (Co-25Cr-5Mo-3Sn-1Mn-1Si), #Gr II (Co-25Cr-5Mo-5Cu-1Mn -1Si) and #Gr III (Co-25Cr-5Mo-3Sn-5Cu-1Mn-1Si) master alloys of granule type were manufactured the same as manufacturing processes for dental casting Ni-Cr and Co-Cr-Mo based alloys of ingot type. These alloys were analyzed melting processes with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer. Methods: These alloys were manufactured such as; alloy design, the first master alloy manufatured using vacuum arc casting machine, melting metal setting in crucible, melting in VIM, pouring in the mold of bar type, cutting the gate and runner bar and polishing. These alloys were put about 30g/charge in the ceramic crucible of high frequency induction centrifugal casting machine and heat, Infrared thermal image analyzer indicated alloys in the crucible were set and operated. Results: The melting temperatures of these alloys measuring infrared thermal image analyzer were decreased in comparison with remanium$^{(R)}$ GM 800+, vera PDI$^{TM}$, Biosil$^{(R)}$ f, WISIL$^{(R)}$ M type V, Ticonium 2000 alloys of ingot type and vera PDS$^{TM}$(Aabadent, USA), Regalloy alloys of shot type. Conclusion: Co-Cr-Mo based alloy in addition to Sn(#Gr I alloy) were decreased the melting temperature with heating time of high frequency induction centrifugal casting machine using infrared thermal image analyzer.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.534-539
• /
• 2005

Particle image analyzer for measuring droplet size has been developed. Image processing technique was used with relaxation method. The morphological method based on partial curvature information of pre-processed images was adopted for recognition and separation of overlapped particles. The measurement results show that the present method may be reliable for the analysis of the size and distribution of droplets produced by water mist spay flow.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.7-13
• /
• 1997

This paper describes the automation of an object generator and an image analyser in a knife scan OTF equipment to enhance the accuracy of OTF measurement. Pinholes and slits of various size in the object generator are used as an objects. A fishtail edge is mounted to the image analyzer and is translated to the direction of 45 degree angle with the horizontal to measure MTF simultaneously in the radial and tangential azimuths. The stepping motor control unit and software for the image analyzer are modified and the accuracy of this equipment is evaluated by measuring the OTF of SIRA group 50 mm standard lens.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.17-22
• /
• 2003

A kind of image analysis system is used to investigate the structural features of the papers made from Indian mallow. The screen mark on the paper was identified and analyzed. The dusts, shives and fiber bundles were manifested and calculated. In the aspect of Indian mallow hanji's surface characteristics analyzed by an Image analyzer, the average of gray level and its standard deviation hanji from the woody core were rather lower than of bast fiber pulp because of better sheet formation of the formers. Hower. high brightness hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.16 no.1
• /
• pp.18-29
• /
• 1990

In this report, the variation of skin surface between before treatment and after treatment was investigated by skin image analyzer. The 30 volunteers were applied cream and lotion on the forearm Inside for 4 weeks, and the measurement parameter of skirl surface was adopted peak, length, height, and width. The results were as follows ; 1. variation trends of parameters was showed that number of peaks were increased, but length, height and width were decreased. 2. The order of improvement for skin surface are as follow ; height > length > peak > width. 3. And also disclosed that the number of peak has a correlation with width, and length has a correlation with height.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.3
• /
• pp.25-31
• /
• 2002

The purpose of this study was to analyze how the fiber properties and mixing ratio of softwood and hardwood pulp affect on roundness of printed image. Softwood pulp and hardwood pulp were refined to 400 and 600ml CSF by Valley beater and handsheets of 70 g/$m^2$ basis weight were made at different mixing ratios of hardwood and softwood pulp. The roundness, dot area, and shape of the printed dot were measured by Image Analyzer. The depths and shapes of the acridine orange penetration into paper were measured by CLSM. With higher mixing ratio of hardwood pulp, the paper showed higher air-permeability and better formation, especially at lower freeness. The roundness of the printed image became better and the dot size became smaller when the amount of hardwood pulp increased. Penetration depth of acridine orange by CLSM became greater and roundness increased to real circle when the amount of hardwood pulp increased. It was thought that higher mixing ratio of hardwood fibers resulted in efficient penetration by better formation with uniform micro-pore distribution and it increased roundness. It was thought that fiber properties and mixing ratio affected the structure of paper and the shape of the printed dot. This study showed that the measurement of depth of the liquid penetration into paper without destruction and contact was feasible. Moreover, this method showed that the shape of the liquid penetration was measurable.

• Proceedings of the Malacological Society of Korea Conference
• /
• 2002.05a
• /
• pp.13-14
• /
• 2002

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 2004.10a
• /
• pp.14-14
• /
• 2004