• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.35-44
• /
• 2015

The main purpose of image enhancement is to improve certain characteristics of an image to improve its visual quality. This paper proposes a method for image contrast enhancement that can be applied to both medical and natural images. The proposed algorithm is designed to achieve contrast enhancement while also preserving the local image details. To achieve this, the proposed method combines local image contrast preserving dynamic range compression and contrast limited adaptive histogram equalization (CLAHE). Global gain parameters for contrast enhancement are inadequate for preserving local image details. Therefore, in the proposed method, in order to preserve local image details, local contrast enhancement at any pixel position is performed based on the corresponding local gain parameter, which is calculated according to the current pixel neighborhood edge density. Different image quality measures are used for evaluating the performance of the proposed method. Experimental results show that the proposed method provides more information about the image details, which can help facilitate further image analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2273-2286
• /
• 2018

This paper describes transformations between elemental image arrays and a RGBD image for three-dimensional integral imaging and transmitting systems. Two transformations are introduced and analyzed in the proposed method. Normally, a RGBD image is utilized in efficient 3D data transmission although 3D imaging and display is restricted. Thus, a pixel-to-pixel mapping is required to obtain an elemental image array from a RGBD image. However, transformations and their analysis have little attention in computational integral imaging and transmission. Thus, in this paper, we introduce two different mapping methods that are called as the forward and backward mapping methods. Also, two mappings are analyzed and compared in terms of complexity and visual quality. In addition, a special condition, named as the hole-free condition in this paper, is proposed to understand the methods analytically. To verify our analysis, we carry out experiments for test images and the results indicate that the proposed methods and their analysis work in terms of the computational cost and visual quality.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.655-664
• /
• 2018

The riverbed material survey is to investigate the particle size distribution, specific gravity, porosity, etc. as basic data necessary for river channel plan such as calculation of sediment transport and change of river bed. In principle, the survey spots are 1 km interval in the longitudinal direction of the river and 3 points or more in the 1 cross section. Therefore, depending on longitudinal length of the river to be investigated, the number of surveyed sites is very large, and the time and cost for the investigation are correspondingly required. This study is to compare the particle size analysis method with the volumetric method and the image analysis method in work efficiency and cost and to examine the applicability of the image analysis method. It was confirmed that the diameter of the equivalent circle converted by the image analysis method can be applied to the analysis of bed material particle size. In the gravel stream with a particle size of less than 10 cm and a large shape factor, the analytical result of the bed material by the image analysis method is accurate. However, when the shape factor decreases as the particle size increases, the error increases. In addition, analysis results of the work efficiency and cost of the volume method and the image analysis method showed a reduction of about 80%.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.34-46
• /
• 2019

A method for detecting foreign substances in mould based on scatter grams was presented to protect moulds automatically during moulding production. This paper proposes a wavelet transform foreign detection method based on Monte Carlo analysis mechanism to identify foreign objects in the tube. We use the Monte Carlo method to evaluate the image, and obtain the width of the confidence interval by the deviation statistical gray histogram to divide the image type. In order to stabilize the performance of the algorithm, the high-frequency image and the low-frequency image are respectively drawn. By analyzing the position distribution of the pixel gray in the two images, the suspected foreign object region is obtained. The experiments demonstrate the effectiveness of our approach by evaluating the labeled data.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.111-118
• /
• 2003

This paper proposes a two dimensional behavior analysis method for fish in a water tank based on the ARX method and the Kalman filter algorithm using image processing technology. In modeling the behavior of fish, the input is denoted as the environmental change and uses M-sequence. The output is expressed by the partnership between fish. The behavior model of individual fish is identified by the ARX method. It is then estimated by the Kalman filter algorithm. Finally, the fish behavior is analyzed by FFT. To prove the effectiveness of the pro-posed algorithm, it is applied to two tilapias in a water tank with dimensions of 100cm$\times$100cm$\times$50cm. The effectiveness of the proposed method is demonstrated through ARX identification, estimation of Kalman filter, and FFT analysis.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.111-120
• /
• 2020

Research should be actively conducted for the ability of X-ray equipment and Retrospective image analysis of X-ray equipment used in hospitals. Retrospective image analysis of X-ray machines, CT and MRI of radiology and medical equipment has been actively conducted. However, image quality measurement using angiography equipment of angiography room is mostly measured with phantom, and image quality measurement on image after being taken by actual patient is insufficient and researches on accurate image quality measurement method are remarkable. It is in short supply. Therefore, through this study, the researcher devised a method to measure the image quality of the acquired image after coronary angiography, and to provide a high quality image to the operator. The equipment and programs used were angiographic examination equipment (Axiom Artis Zee Ceiling) and Image J program. Subjects were images automatically saved in PACS program after coronary angiography.For image quality measurement, selected the AP Caudal 30° image that show the LCA vessel well and the LAO 30° image that show the RCA vessel well during the coronary angiography. In order to measure the background and ROI of the selected image by selecting an image, a criterion on how to find and measure a section where the overlap of the shadow, such as blood vessel, liver and lung is minimized, is presented. In conclusion, there is no exact standard for analyzing an image quality measurement method of angiography image. Therefore, in order to provide quality images to the practistioners, not only the technicians of the equipment but also the users who actually use them should become researchers and conduct research on image quality measurement in various ways. Thus, it is expected to provide excellent images to patients.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.3
• /
• pp.91-101
• /
• 2011

Internet is becoming increasingly popular due to the rapid development of information and communication technology. There has been a convenient social activities such as the mutual exchange of information, e-commerce, internet banking, etc. through cyberspace on a computer. However, by using the convenience of the internet, the personal IDs(identity card, driving license, passport, student ID, etc.) represented by the electronic media are exposed on the internet frequently. Therefore, this study propose a feature extraction method to analyze the characteristics of image files containing personal information and a image retrieval method to find the images using the extracted features. The proposed method selects the feature information from color, texture, and shape of the images, and the images as searched by similarity analysis between feature information. The result which it experiments from the image which it acquires from the web-based image DB and correct image retrieval rate is 89%, the computing time per frame is 0.17 seconds. The proposed method can be efficiently apply a system to search the image files containing personal information and to determine the criteria of exposure of personal information.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.188-194
• /
• 2010

In this paper, the typical Synthetic Aperture Radar (SAR) image quality parameters and analysis method are defined, and the SAR image analysis tool is presented for SAR image evaluation. The structure of the developed SAR image analysis tool consists of four key modules; point target analysis (PTA) module, distributed target analysis (DTA) module, ambiguity analysis (AMA) module, and NESZ analysis (NESZA) module. The developed tool is able to extract the various SAR system parameters from standard SAR product format files. Based on these extracted system parameters, typical SAR image quality parameters are derived from SAR image data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.663-670
• /
• 2009

In this paper, we propose the image encryption method which gradually uses NFSR(Non-linear Feedback Shift Register) and 20 CAT(Two-Dimensional Cellular Automata Transform). The encryption method is processed in the following order. First, NFSR is used to create a PN(pseudo noise) sequence, which matches the size of the original image. Then, the created sequence goes through a XOR operation with the original image and process the encipherment. Next, the gateway value is set to produce a 20 CAT basis function. The produced basis function is multiplied by encryption image that has been converted to process the 20 CAT encipherment. Lastly, the results of the experiment which are key space analysis, entropy analysis, and sensitivity analysis verify that the proposed method is efficient and very secure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.648-657
• /
• 2004

The purpose of this study was to identify the relationship between avatar image and self-concept of avatar users by utilizing focus group interviews and survey method. The subjects of the focus group interview were Freechal Avatar Club members, while those of the survey were 476 students, who attended middle schools, high schools and colleges at Seoul area. The data were analyzed by frequency, factor analysis, cluster analysis, chi-square test, one-way ANOVA and scheffe test. The main results were summarized as follows. First, the focus group interview revealed that avatar image types, which avatar users made use of, were ideal image, real image and fantastic image. Second, based on the avatar image types of focus group interviews, the researcher made out avatar image question items and conducted factor analysis of the question items: The avatar users pursued ideal image, real image and fantastic image. The avatar users groups were classified into ideal image group, real image group and fantastic image group by employing cluster analysis. Third, all of body-esteem and self-esteem were the highest at real image group, while all of that were the lowest at ideal image group.