• 한국전자통신학회논문지
• /
• 제9권4호
• /
• pp.499-508
• /
• 2014

본 논문에서는 생체신호인 PPG, GSR 신호의 변화에 따라 구동되는 LED 감성조명 시스템을 구현하였다. 개발된 GSR 및 PPG 센서모듈로부터 인체의 생체신호를 측정하고, 측정된 생체신호를 이용하여 MCU에서 제안된 각성 이완 판별맵에 근거하여 피검자의 각성 또는 이완 상태를 판단한다. 피검자의 상태에 대응하는 LED 조명색상의 변화를 주어, 피검자가 안정 상태의 감정에 도달할 수 있도록 하는 감성조명 시스템을 개발하였다.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.679-686
• /
• 2015

This paper presents a design method for improving the low relative illumination and large distortion due to widening the field of a system. A tele-centric optical system in image space was suggested to increase the relative illumination. Through the analyses of the third-order aberrations affected by introducing aspherical surfaces, we have proposed a method to determine analytically what surface should be aspheric to correct each aberration effectively. By utilizing this method to design a wide field lens, a tele-centric wide field lens with f-number of F/2.0 was obtained. Even though the field angle is 120 degrees, it has a very low distortion less than -2% and high relative illumination more than 73.7%. In conclusion, this analytic method for selecting aspherical surfaces is expected to serve as a useful way to find design solutions.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.247-255
• /
• 2012

Daylighting has a very effective role in reducing power consumption and improving indoor environments in office buildings. Previously, it was not under consideration as a major source of renewable energy due to poor reliability in the design. Optical fiber as a transmission medium in the daylighting system demands uniform distribution of light to solve cost, heat, and efficiency issues. Therefore, this study focuses on the uniform distribution of sunlight through the fiber bundle and to the interior of the building. To this end, two efficient approaches for the fiber-based daylighting system are presented. The first approach consists of a parabolic mirror, and the second approach contains a Fresnel lens. Sunlight is captured, guided, and distributed through the concentrator, optical fibers, and lenses, respectively. At the capturing stage, uniform illumination solves the heat problem, which has critical importance in making the system cost-effective by introducing plastic optical fibers. The efficiency of the system is increased by collimated light, which helps to insert maximum light into the optical fibers. Furthermore, we find that the hybrid system of combining sunlight and light emitting diode light gives better illumination levels than that of traditional lighting systems. Simulation and experimental results have shown that the efficiency of the system is better than previous fiber-based daylighting systems.

• 한국정밀공학회지
• /
• 제31권3호
• /
• pp.261-268
• /
• 2014

Precision screws have a wide range of industrial applications such as electrical and automotive products. To produce screw threads with high precision, not only high precision manufacturing technology but also reliable measurement technology is required. Machine vision systems have been used in the automatic inspection of screw threads based on backlight illumination, which cannot detect defects on the thread surface. Recently, an omnidirectional inspection system for screw threads was developed to obtain $360^{\circ}$ images of screws, based on front light illumination. In this study, the illumination design for the omnidirectional inspection system was modified by adding a light shield to improve the image uniformity. Optical simulation for various shield designs was performed to analyze image uniformity of the obtained images. The simulation results were analyzed statistically using response surface method, from which optical performance of the omnidirectional inspection system could be optimized in terms of image quality and uniformity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.162.4-162
• /
• 2001

This paper presents a fuzzy-based method for classification skin color object in a complex background under varying illumination Parameters of fuzzy rule base are generated using a genetic algorithm(GA). The color model is used in the YCbCr color space. We propose a unique fuzzy system in order to accommodate varying background color and illumination condition This fuzzy system approach to skin color classification is discussed along with an overview of YCbCr color space.

• 항공우주시스템공학회지
• /
• 제5권2호
• /
• pp.12-17
• /
• 2011

Pilot and flight crew visual performance in general aviation aircraft operating is paramount for safe operation of the aircraft. Pilot compartment view, instrument and cockpit lighting forms an essential aspect of this visual performance, and therefore warrants guidance and standardization. This study introduces acceptable design criteria for pilot compartment view, instrument and cockpit illumination for general aviation aircraft.

• 대한약리학회지
• /
• 제8권2호
• /
• pp.35-39
• /
• 1972

Previous studies on the effect of the visible lights on the organism have shown the possible influences on the nervous system. It was reported that the illumination of blue beam increased the sympathetic tone and that of red beam increased the parasympathetic tone. The pharmacological actions of the sympathomimetics were also known to be altered by various visible lights. But their modes and mechanisms of actions on the nervous system have not been clarified and is obscure. To elucidate the precise mechanism of action of the visible lights on the nervous system, present study was made to observe the survival time of the mole living in the dark environment, under the illumination of the various visible lights and influences of several drugs. The results are summerized as follows: 1. The illumination of the natural sun light caused the survival time of the mole to be shortened and visible monochromatic beams (red, blue and green) even more markedly shortened the survival time. No significant difference was noted depending on the wave length of the chromatic beam. 2. The shortened survival time caused by the visible monochromatic lights was prolonged by strychnine but not affected by morphine. 3. The survival time under the illumination of the visible monochromatic lights was prolonged by acetylcholine and physostigmine. 4. The shortened survival time under the illumination of the monochromatic visible lights was not affected by adrenaline but prolonged by priscoline. It is suggested that the shortened survival time of the mole by the illumination of the visible lights can be prolonged by the stimulation of central and parasympathetic nervous system and blocking of the sympathetic nervous system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.737-741
• /
• 2001

본 논문에서는 태양광을 이용한 조명시스템이 설계되었다. 개발되고 있는 시스템은 태양추적을 위한 제어부와 Cds센서 모듈 그리고 태양광 전송부로 이루어져있다. $\pm$2$^{\circ}$의 허용오차 범위내에서 집광판이 태양에 수직으로 추적하기 위하여 Cds센서를 이용한 on-line 알고리즘이 설계되었다. 재발되고 있는 시스템의 효율성을 입증하기 위하여 몇가지의 야외 실험이 진행 중에 있다.

• 센서학회지
• /
• 제29권3호
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.172-178
• /
• 2018

We propose a precise 3D endoscopic technique for medical and industrial applications. As the 3D measuring principle, the continuously scanning structured illumination microscopy (CSSIM), which enables to obtain 3D sectional images by the synchronous axial scanning of the target with the lateral scanning of the sinusoidal pattern, is adopted. In order to reduce the size of the probe end, the illumination and detection paths of light are designed as coaxial and a coherent imaging fiber bundle is used for transferring the illumination pattern to the target and vice versa. We constructed and experimentally verified the proposed system with a gauge block specimen. As the result, it was confirmed that the 3D surface profile was successfully measured with $16.1{\mu}m$ repeatability for a gauge block specimen. In order to improve the contrast of the sinusoidal illumination pattern reflected off on the target, we used polarizing optical components and confirmed that the visibility of the pattern was suitable in CSSIM.