• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.911-916
• /
• 2001

Structural acoustic modification method based on the structural mobility analysis is applied to reduce the structure-borne noise radiated from hard disk drive system. Sound intensity techniques and ODS(Operational Deflection Shape) techniques are also used in order to provide the structural acoustic information for the mobility modification. The sound intensity is for the acoustic visualization of the noise source locations, and the ODS is for the visualization of the vibration pattern and its dynamic characteristics of the noise sources. Using visualization information of sound and vibration, local structural input mobility is reduced in the frequency band of interest by designing asymmetrical wave-stringer structure in the wave-number domain as well as frequency domain. The overall sound pressure level is reduced by 4dB and its controlled sound power radiated from the disk drive is proved to under 2.8Bel in idle-spinning mode and 3.1 Bel in random-seeking mode, which are the lowest noise levels in the hard disk drive industry.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제31B권10호
• /
• pp.21-31
• /
• 1994

This paper describes the multichannel combined R2MFC/DTMF/CCT reciver which provides a signaling service functions for call processing control in digital switching system. Using the TMS320C25 DSP chip, we have implemented multi-function receriver shich processes 8 channels of R2MFC, DTMF, and CCT signals simultaneously. In order to increase the channel multiplicity of the combined receiver. R2MFC and CCT receiver were employed by discrete Fourier transform(DFT) method using Goertzel algorithm, and DTMFreceiver was employ by infinite impulse reponse(IIR) filtering method using 4KHz subsampling technique. The combined receiver has 4 function modes for each channel such as R2MFC, DTMF, CCT, and Idle modes. The function mode of each channel may be selected at any time by single-chip micro-controller(.mu.C). Hence, the number of channels assigned for each function mode can be adjusted dynamically according to the signaling traffic variations. From the experimental test results using the test-bed, it has been proved that the combined receiver statisfies all receiver satisfies all receiver specifications, and provides good channel multiplicity and performance, Therefore, it may give a great improvement than existing receiver in cost, reliability, availability, and serviceability.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제17권5호
• /
• pp.561-568
• /
• 2014

The Republic of Korea Army is using R-NAD of MIL-STD-188-220 as a Media Access Control protocol. Under urgent situations, almost all stations transmit data frames and then the network will reach a saturation state. Several articles have been devoted to the study of R-NAD performance. However, most of them focus on comparing the performance of some NADs using network simulation tools. We propose an analytical model to compute the throughput of R-NAD under the assumption of a network traffic saturation. Analytical results were verified by Monte Carlo methods. We have shown that the performance of a success probability and an average idle time remains almost unchanged as the total number of stations increases. We have also shown that Type 1/2/4 operation mode outperforms Type 3 operation mode in throughput. The results showed that the system with a squelch detection achieved a better performance than the one without it. The longer DATA time had a higher throughput.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1188-1191
• /
• 2003

In this paper, we focus our attention on the improvement of locking time and jitter parameter and propose the new structure of PLL which combined with the FVC, FOVI Matcher(FVC-Output and VCO-input Matching Circuit), Control Circuit and the conventional charge pump PLL. Using fast operation characteristics of the FVC, the circuit matching FVC-Output and VCO-input (FOVI Matcher) made to synchronize very fast. Fast locking time is usually required for application where the PLL has to settle rapidly if they switch from an idle mode to a normal mode and to track high-frequency data bit rate in data recovery systems. After a fast acqusition is achieved by the using the FVC, the conventional PLL operates for removing the phase error between the reference signal and the feedback signal. Therefore this structure can improve the trade-off between acquisition behavior and locked behavior.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제21권1호
• /
• pp.187-192
• /
• 2017

In dense deployments of sensor nodes in Wireless Sensor Networks, the MAC protocol has challenges to solve problems such as reducing delivery delay and reducing energy consumption. To solve these problems lots of protocols are suggested. This paper proposed a sensor nodes' residual energy based wake-up control mechanism, in which each node decides whether it wakes up or stays in sleep mode to save energy consumption by reducing unnecessary idle listening. The main idea of the wake-up control mechanism is to save node's energy consumption. The proposed wake-up control mechanism is based on the RI-MAC protocol, which is one of the receiver-initiated MAC protocols. A receiver node in the proposed mechanism periodically wakes up and broadcasts a beacon signal based on the energy status of the node. A receiver node also adjusts wake-up period based on the traffics. Results have shown that the proposed MAC protocol outperformed RI-MAC protocol in the terms of energy consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.99-103
• /
• 2006

In this paper, we focus on the problem of designing an energy efficient MAC protocol for wireless sensor networks and analyze S(Sensor)-MAC and T(Time-out)-MAC. S-MAC is based on the concept of the 'listen/sleep mode cycle'. This applies message passing to reduce contention latency for sensor-network applications that require store-and-forward processing as data moves through the network. However unlike the S-MAC, where the duration of the cycle is fixed, T-MAC introduces an adaptive duty cycle in a novel way: by dynamical ending the active part of it. This reduces the amount of energy wasted on idle listening, in which nodes wait for potentially incoming messages while still maintaining a reasonable throughput. In this paper we discuss the design of these two Protocols. We analyze them from the aspect of latency, throughput, and power savings when using the OMNeT++ simulator in various environments.

• The Transactions of the Korea Information Processing Society
• /
• 제4권11호
• /
• pp.2832-2839
• /
• 1997

In this paper, a testing architecture and procedure that an idle ATM virtual channel can be utilized for TCP channel is proposed. Four kinds or methodologies for protocol conformance testing have been standardized in ISO. Remote testing method used popularly have some disadvantages that developer must operate system manually in case of System Under Test (SUT) active testing and we cannot control and observe Implementation Under Test (IUT) often. It is proper to adopt distribute testing method than remote test in order to maximize test coverage and optimize fault coverage for conformance testing in ATM systems, and it is required that TCP channel is prepared for distribute testing method. The proposed architecture can adopt distributed testing method without extra physical channel for testing control. Also we can maximize the test coverage and implement the automation of testing without intervention of operator sustaining normal operation of ATM equipment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.579-585
• /
• 2001

This paper proposed a method of reducing a noise in hard disk drive. This method is performed through three parts of procedures. First procedure is sound-oriented experiment, which contains sound intensity techniques and measurements of sound pressure level and sound power. Second is vibration-oriented experiment, which contains FRF(Frequency Response Function) analysis and disk vibration reduction techniques. And the third is computer-oriented simulation, which contains modal analysis and force vibration analysis using ANSYS and sound radiation prediction using SYSNOISE. As these three parts can affect with each other, they should be considered and conducted simultaneously. Through this procedure sound power is measured 2.7 Bels in idle-spinning mode, which is the lowest noise level in the HDD industries.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2010년도 춘계학술발표대회
• /
• pp.218-221
• /
• 2010

현재 중복 제거 기술은 클라이언트 기반 중복 제거 모델, 인라인(in-line) 중복 제거 모델 그리고 포스트 프로세스(post-process) 중복 제거 모델로 구분할 수 있다. 본 연구에서는 클라이언트와 서버의 부하를 모니터링하여 시스템 부하에 따라 중복 제거의 핵심 작업을 동적으로 변경한다. 즉, 클라이언트가 유휴하고 서버의 자원 사용량이 높은 경우에는 클라이언트 기반 중복 제거 모델로 동작시키고, 클라이언트의 자원 사용량이 높고 서버가 유휴한(idle) 경우에는 인라인 중복 제거 모델로 동작시킨다. 그리고 전체 시스템이 과부하인 경우는 포스트 프로세스 모델로 동작하게 된다. 제안하는 방식에 대한 실험 결과 전체 시스템의 처리율이 높아지는 것을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.1070-1073
• /
• 2010

모바일 기기의 통신에 있어 가장 중요한 요소는 이동성 지원이다. 이에 따라 3G 와 같은 이동통신을 지원하는 기술이 출현하게 되었고 이를 통해 이동 중에도 데이터 통신이 가능하게 되었다. 하지만 이동통신은 많은 에너지 소비와 높은 통신 비용문제 등으로 대용량 전송에 적합하지 않은 문제점이 있다. 이에 반해 Wi-Fi 와 같은 Wireless 네트워크는 이동성을 지원하지 않는 대신 허가 받지 않은 주파수 대역을 이용하여(예: Wi-Fi 의 2.4GHz, 5GHz) 높은 대역폭을 제공할 뿐만 아니라 전력을 적게 사용하는 장점이 있다. 본 논문에서는 3G 와 Wi-Fi 을 동시 다중 연결을 통해 서로의 장점을 극대화하고 단점을 보안한 기법을 제시하고 시뮬레이션을 통해 이를 검증 한다.