• Journal of the Korean earth science society
• /
• 제36권4호
• /
• pp.301-314
• /
• 2015

The purpose of this study was to investigate the impact of ground-based glaciogenic seeding on orographic clouds in the Daegwallyeong area on 13 March, 2013. The experiments was conducted by releasing silver iodide (AgI) under following conditions: surface temperature below $-4^{\circ}C$, wind direction between 45 and $130^{\circ}$, and wind speed less than $5ms^{-1}$. Two seeding rates, $38gh^{-1}$ (SR1) and $113gh^{-1}$ (SR2), were tested to obtain an appropriate AgI ratio for snowfall enhancement in the Daegwallyeong area. Numerical simulations were carried out by using the WRF (Weather Research and Forecast) model with AgI point-source module which predicted dispersion fields of AgI particles. The results indicated that the target orographic clouds contained adequate amount of supercooled liquid water and that the dispersion of AgI particles tended to move along the prevailing wind direction. To validate the seeding effects, the observation data from FM-120 and MPS as well as PARSIVEL disdrometer were analyzed. In this case study, glaciogenic seeding significantly increased the concentration of small ice particles below 1 mm in diameter. The observation results suggest that SR1 seeding be reasonable to use the ground-based seeding in the Daegwallyeong area.

• Economic and Environmental Geology
• /
• 제51권5호
• /
• pp.463-471
• /
• 2018

In this paper, we review previous studies on the relative sea-level changes in the Yellow Sea during the Holocene to comprehensive understand the various research results. Currently, it is reported two theories : 1) the Holocene sea-level has never been higher than the present-day level; and 2) sea-level have reached highstand during mid-Holocene, followed by slow lowering to that of the present. The first theory yields a curve that is similar to a climate-change-related eustatic sea-level curve. However, in reality, most of the relative sea-level fluctuation resulted from land uplift or subsidence. The second theory yields a curve that is fairly coincident with a relative sea-level curve indicative of continental margins being located away from the ice sheets(i.e., far-field), and is considered as an effect of GIA(Glacio Isostatic Adjustment) and gravitational attraction. Based on detailed review of previous researches, we realized that they sourced the same papers, but obtained different results because they selectively chose and added the data. The data used to derive the second theory pertain to the northern Gunsan region, which is located within the western area of the Chugaryeong fault. Thus, we believe that the sea-level curve for the second theory is only representative of the area north of Gunsan, which is subject to GIA and tectonic deformation. Although the relative sea-level curve for the west coastal area is comparable to that for the far-field continental margin region, it is necessary to evaluate local tectonic activities as suggested by active seismicity in the west coastal area and the more than 400 faults currently existing in on the Korean Peninsula.

• Journal of Physiology & Pathology in Korean Medicine
• /
• 제21권5호
• /
• pp.1108-1117
• /
• 2007

To investigate the possible mechanism of ${\alpha}-spinasterol$ as a candidate of anti-cancer drug, I examined the effects of ${\alpha}-spinasterol$ on the apoptosis of U937 cells MTT assay, flow cytometric analysis, SDS-polyacrylamide gel electrophoresis, Western blot analysis, and RT-PCR were performed. ${\alpha}-spinasterol$ treatment reduced the cell viablilty of U937 cells in a dose-dependent manner, which was associated with the induction of apoptotic cell death. ${\alpha}-spinasterol$ treatment also reduced the levels of Bcl-xL anti-apoptotic protein expression and increased the levels of caspase-3, p53, pro-apoptotic protein, in U937 cells. After treatment the level of Bcl-xL, anti-apoptotic gene expression was decreased and the level of ICE pro-apoptotic gene expression was increased. These findings suggest that ${\alpha}-spinasterol$ induced the apoptotic cell death via regulation of several growth regulatory gene products. The abbreviations used are: FBS, fetal bovine serum; PBS, phosphate buffered saline; PI, propidium iodide; OD, optical density; DiOC6, 3,3-dihexyloxa carbcyanine iodide; MTT, 3 [4-5-dimethylthiazol-2-yl] -2-diphenyltetrazolium bromide.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제8권2호
• /
• pp.107-117
• /
• 1975

Alaska pollack caught in the Northern Pacific Ocean and frozen aboard vessel are skipped to the plant and processed into frozen fillets. In the present paper quality changes during thwaing, refreezing and storage at $-20^{\circ}C$ are discussed. Natural, running-water, vacuum and steam thawing were employed as thawing methods. And contact plate, air blast, immersion in dry ice-alcohol solution freezing and storage at $-5^{\circ}C$ were applied to refreeze the thawed fillets. As quality factors content of drip released, salt-extractable protein, VBN, DNA in the drip and pH were determined. In addition, bacteriological tests were also carried out along with the whole process. In thawing of round material, the vacuum thawing was more effective than any other method, resulting in drip, salt-extractable protein $(N\%)$, VBN and DNA as $4.4\%,\;1.82\%,\;16.21mg\%$ and $13.70\;{\mu}g/ml$, respectively. Storage at $-5^{\circ}C$ as refreezing method yielded lower in drip and DNA content but similar to or slightly higher in both salt-extractable protein and VBN, which might postulate that the quality of the frozen fillet depends not largely on the secondary freezing but on the conditions of thawing and primary freezing. It seemed that most of the bacterial flora in thawed fillet came from skin and viscera of fish, worker's hands, utensils and other processing facilities, since sanitary indicative bacteria were not detected in the frozen flesh of round Alaska pollack. Bacterial quality of fillet varied with thawing methods, vacuum thawing appeared more sanitative compared with other methods as natural, running-water, and steam thawing. Bacterial colonies isolated from the thawed fillet were composed of $73.8\%$ Gram negative rod shape, $4.9\%$ Gram positive rod shape, $18.0\%$ cocci, and $3.3\%$ yeast. Decreasing rate of coliform group of the fillet during the storage at $-20^{\circ}C$ for 30 days was more than $70\%$ and that of plate count was less than of coliform group.

• Journal of the Korean earth science society
• /
• 제35권1호
• /
• pp.19-28
• /
• 2014

The radiative transfer for TIROS operational vertical sounder (RTTOV) and the community radiative transfer model (CRTM) are two fast radiative transfer models (RTM) that are used as observation operators in numerical weather prediction (NWP) systems. This study compares the basic structure and input data of the two models. With data from Advanced Microwave Sounding Unit-A (AMSU-A), which has channels of various frequencies, observed brightness temperature ($T_B$) and simulated $T_B$s from the two models are compared over the ocean surface in two cases-one where cloud information is included and the other without it. Regarding AMSU-A sounding channels (5-14), the two models produce no large significant differences in their calculated $T_B$, but RTTOV produces smaller first guess (FG) departures (i.e., better results) in window and near-surface sounding channels than does CRTM. When adding cloud water and ice particles from Unified Model (UM), the $T_B$ bias between observations and simulations are reduced in both models and the bias at 31.4 and 89 GHz is substantially decreased in CRTM compared to those of RTTOV.

• Journal of the Korean School Mathematics Society
• /
• 제12권4호
• /
• pp.523-544
• /
• 2009

The object of this study is to analyze manipulative materials in the Pattern & Algebra field of Maths300-Maths with Attitude, Australian school mathematics program with manipulative materials to search meaningful ways for school mathematics. To accomplish these projects, 20 manipulative materials in the Pattern & Algebra field of the Maths with Attitude are introduced and each manipulative materials can be used are searched according to grades and fields of Korean educational course. And 4 mathematics classes for 3rd and 5th grades(two for each grades) with manipulative materials are performed and effect of these classes are examined by recorded data and students' opinions are inquired by questionnaire. First, We analyze Pattern & Algebra of the Maths with Attitude 20 manipulative materials such as 4ARM SHAPES, ADDITION TOTALS, ICE CREAM FLAVOURS, THE LAND OF ET, etc. In this analysis, plans for utilizing the manipulative materials are categorized in 9 types. Second, by students' handling these kinds of manipulative materials in classes, their interest in mathematics is increased and voluntary and creative classes out of the conventional ones can be made. Also, students' self-confidence in mathematics and active participation is animated. This kind of manipulative materials are introduced in the educational field of elementary schools, plans for utilizing the teaching aids in the field are analyzed, the teaching aids are practically applied to classes, and the effect and meanings for mathematics classes are examined. With this research, another researches about the introduction and utilization of other various manipulative materials for motivating students to efficiently understand what they learn in mathematics class of elementary schools are required.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권11호
• /
• pp.1649-1656
• /
• 2015

Gene expression profiling has offered new insights into postmortem molecular changes associated with meat quality. To acquire reliable transcript quantification, high quality RNA is required. The objective of this study was to analyze integrity of RNA isolated from chicken skeletal muscle (pectoralis major) and its capability of serving as the template in quantitative real-time polymerase chain reaction (qPCR) as a function of postmortem intervals representing the end-points of evisceration, carcass chilling and aging stages in chicken abattoirs. Chicken breast muscle was dissected from the carcasses (n = 6) immediately after evisceration, and one-third of each sample was instantly snap-frozen and labeled as 20 min postmortem. The remaining muscle was stored on ice until the next rounds of sample collection (1.5 h and 6 h postmortem). The delayed postmortem duration did not significantly affect $A_{260}/A_{280}$ and $A_{260}/A_{230}$ ($p{\geq}0.05$), suggesting no altered purity of total RNA. Apart from a slight decrease in the 28s:18s ribosomal RNA ratio in 1.5 h samples (p<0.05), the value was not statistically different between 20 min and 6 h samples ($p{\geq}0.05$), indicating intact total RNA up to 6 h. Abundance of reference genes encoding beta-actin (ACTB), glyceraldehyde 3-phosphate dehydrogenase (GAPDH), hypoxanthine-guanine phosphoribosyltransferase (HPRT), peptidylprolylisomerase A (PPIA) and TATA box-binding protein (TBP) as well as meat-quality associated genes (insulin-like growth factor 1 (IGF1), pyruvate dehydrogenase kinase isozyme 4 (PDK4), and peroxisome proliferator-activated receptor delta (PPARD) were investigated using qPCR. Transcript abundances of ACTB, GAPDH, HPRT, and PPIA were significantly different among all postmortem time points (p<0.05). Transcript levels of PDK4 and PPARD were significantly reduced in the 6 h samples (p<0.05). The findings suggest an adverse effect of a prolonged postmortem duration on reliability of transcript quantification in chicken skeletal muscle. For the best RNA quality, chicken skeletal muscle should be immediately collected after evisceration or within 20 min postmortem, and rapidly preserved by deep freezing.

• Journal of the Korean GEO-environmental Society
• /
• 제18권1호
• /
• pp.31-35
• /
• 2017

The mechanical characteristics of frozen sand greatly depend on the frozen temperature and the fine contents according to the previous study by Chae et al. (2015). There are two hypotheses to explain this experimental results; one is the unfrozen water contents greatly affected by the fine contents and frozen temperature and the other is the sand particle spacing greatly affected by the pore-ice. To evaluate the latter hypothesis, the micro X-ray CT scan was performed. The micro X-ray CT scanning, one of the actively performed interdisciplinary research area, has a high resolution with micrometer unit allows to investigate internal structure of soils. In this study, X-ray CT technique was applied to investigate the effect of the frozen temperature and fine contents on the sand particle minimum and average spacing with the developed image processing techniques. Based on the spacing analysis, the frozen temperature and fine contents have little influence on the sand particle spacing in the frozen sand specimens.

• Korean journal of applied entomology
• /
• 제18권1호
• /
• pp.55-61
• /
• 1979

Since rice high yielding practices with blast resistant varieties induced severe and earlier infestation of sheath blight recently, it is strongly suggested to spray at least 10 days earlier than the present recommendation and more than 2 sprays from early July to early August seems to be essential for the efficient control of sheath blight in the future. Among organo-arsenic fungicides, MAFe (Neo Asozin) is known as the most effective and economic as well as with the advantages of free phytotoxicity and safe residure on rice, and applications of the mixed formulation with other fungicide and insecticide is suitable for the one-hit control of rice diseases and insect pests in connection with cooperative mass control system. Present level of arsenic $(As_2O_3)$ residue in .ice is summarized as 0.2ppm to 0.65 ppm in highest average, and there are more possibilities of extensive MAFe fungicide uses for the efficient and economic control of this disease. During the past few years, the acreage of sheath blight control has been extended several times while the increase of the fungicides used for sheath blight showing about 10 times in quantity and mort than 15 times in amount, and also the fungicide cost estimated for the control is differ from 1 to 12 billion 1on by the use of MAFe or antibiotic fungicide in a year.

• Journal of Technologic Dentistry
• /
• 제32권4호
• /
• pp.341-350
• /
• 2010

Purpose: This study focused on achieving desired shades by combining zirconia core with different thickness porcelain in order to make dental prostheses effectively. Methods: White and colored $LAVA^{TM}$ All Ceramic (3M-ESPE, Seefeld, Germany), and Zirkonzahn (Bruneck, Italy) Trans and prettau were used to have Zirconia. LAVATM Ceram (3M-ESPE, Germany) and ICE (Zirkonzahn, Italy) powder were used to have the porcelain. We made quadrilateral specimen of thickness 0.3mm, 0.5mm, 0.7mm and diameter 10 to use zirconia ceramics system of 2 kinds that color tone reappearance way is different and produced total 120 specimens to 4 experimental groups. We used Spectrophotometer to analyze color tone. Data's value getting by dispersal colorimetry period found L*, a*, b* value using Excel program. We used one-way ANOVA to use SPSS WIN 12.0 program. Results: All L*, a*, b* indexes of zirconia core and porcelain veneer in LAVA group and Zirkonzahn group were different. When you combine the white zirconia core of LAVA group with a porcelain veneer, the thickness of the porcelain must be more than 0.5mm to meet the standard target. When all the colored zirconia cores of LAVA group were combined with porcelain veneers, there was no significant difference from the standard target. When the zirconia cores of Zirkonzahn group are combined with porcelain veneers, the thinner thicknesses were closer to the standard tab than thicker thicknesses; however, there was a significant difference in all combinations, with Delta E* value indicating more than 3. Conclusion: When it comes to colored zirconia, which is the most popular, the thicknesses of both a core and a dentin veneer must be more than 0.3mm to get an appropriate shade. There is more possibility to get desirable shades when the thicknesses of a white core are thinner; however, they would be vulnerable to the environment and lose their color. When combine a zirconia core with a dentin veneer, using Zirkonzahn group needs more considerations in order to meet the standard target.