• Journal of Adhesion and Interface
• /
• v.6 no.2
• /
• pp.1-5
• /
• 2005

Single crystals of metallocene-catalyzed isotactic polypropylene (iPP) and/or syndiotactic PP (sPP) were prepared and preliminarily characterized. The crystallization was performed utilizing 0.1 % by weight concentrations of each PP in o-xylene in the range of temperature of $40{\sim}90^{\circ}C$. Following the XRD patterns, samples were ${\alpha}$-iPP and antichiral Cell III of sPP. The XRD pattern of iPP shows three ${\alpha}$-form peaks due to the (110), (040), (130) planes at $2{\theta}=14.2^{\circ}$, $17^{\circ}$, $18.8^{\circ}$, respectively. The XRD pattern of sPP is characterized by the presence of the (020) reflection at $16^{\circ}$. The melting point ($123^{\circ}C$ and $148^{\circ}C$, respectively) of the metallocene catalyzed iPP and sPP were generally lower than that of conventional PP ($160{\sim}170^{\circ}C$) due to the misinsertion of the monomer. When metallocene-catalyzed iPP samples were crystallized isothermally from solution grown at a lower temperature, lozenge shape single crystals were observed by transmission electron microscopy (TEM).

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.521-527
• /
• 2003

It was found that polypropylene shows rearrangement of crystal structure during the melting process. For the analysis of recrystallization behavior, the change of dynamic mechanical property, crystallinity, and crystal structure were studied by DSC, FT-IR, SAXS, and DMA. Melt-recrystallization-remelting behavior of iPP was clearly observed when iPP was cooled down kom the melt more rapidly. Elastic modulus of iPP increased during the recrystallization process but crystallinity of iPP shows constant value. Furthermore, the full width of half mean of SAXS pattern decreased about 30%, and intra-lamella ordering of iPP increased during the melt process but is was not found for sPP.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.509-520
• /
• 2003

The study was made to compare the crystallization behavior of polypropylene (PP) with different stereo-regularity. The unit cell parameters, lamellar structure of PP, and the growth of thieir spherulites were strongly dependent upon the crystallization condition. It was shown that metastable structure appeared with increasing cooling rate. The structural change of isotactic PP (iPP) was larger than that of syndiotactic PP (sPP). The crystal structure of sPP showed body centered cell III when it is cooled down with 1 $^{\circ}C$/min. When sPP was grown to primitive cell II structure, both unit cell and lamellar structure were less affected by a cooling rate. The overall crystallization rate of ipp was faster than that of sPP.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.44-49
• /
• 1999

Effects of particulate size and frictional characteristics were examined on the melting behavior of PP (polypropylene) in a batch mixer. Powder and pellet types of PP were used and each component was blended with PE (polyethylene) wax and clay, respectively. It was observed that small size particulates, i.e. powder systems exhibit accelerated melting behavior; and it was also found that the abrasive additive acts as an effective agent for fast melting of PP powder. Retardation of melting due to the reduced friction was observed in PP pellet/PE wax blends, while melting rate of PP powder was increased by addition of PE wax.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.430-434
• /
• 2004

The values of fracture energy and mechanical flexural strength of Fiber Reinforced Cement (FRC) with polypropylene (PP) fiber modified by Ion Assisted Reaction (JAR), by which functional groups were grafted on the surface of PP fiber, was improved about 2 times as those of fracture energy and flexural strength of cement reinforced by untreated PP fiber. PP fiber was irradiated in O$_2$ environment by Ar$\^$+/ ion. The contact angle of PP treated by IAR decreased largely when compared with untreated PP. From this result, we expected that surface energy and interfacial adhesion force of treated PP fiber increased. The strain hardening occurred in the strain-stress curve of FRC including PP treated by IAR when compared with that of FRC with untreated PP. These enhanced mechanical properties might be due to strong interaction between hydrophilic group on modified PP fiber and hydroxyl group in cement matrix. This hydrophilic group on surface modified PP fiber was confirmed by XPS analysis. We clearly observed hydration products that were fixed at modified PP fiber due to the strong adhesion force of interface in cement reinforced modified PP by SEM (Scanning Electron Microscopy) study.

• Applied Microscopy
• /
• v.26 no.1
• /
• pp.67-77
• /
• 1996

Pancreases obtained from native Korean goats were used, and examined by immunoelectron microscopy using several antisera. Five types cells, glucagon (A), insulin (B), somatostatin (D), and pancreatic polypeptide (PP-I and PP-II) cells, were identified in the pancreatic islets. The morphologies of A, B, and D cells corresponded to the typical charateristics described in previous reports on other mammals. Serotonin immunoreactivity was observed in the D cells on the basis of the granular profiles. Two types of PP cells could be distinguished on the basis of the granular profile: the first type was formed by round, homogeneous secretory granules ($220{\sim}400nm$) having a narrow halo between the dense core and limiting membrane, while the other type consisted of cells whose secretory granules ($240{\sim}440\;nm$ in the major axis, $150{\sim}200nm$ in the minor axis) were pleomorphic, having a dense core and a closely fitting limiting membrane. From these results, we suggest that the pancreatic islets of the native Korean goat consist of five types of endocrine cells, A, B, D, PP-I and PP-II cells. Among these, PP-I type cells may correspond to the classical PP of other mammalian pancreases, while PP-II type cells may correspond to the enterochromaffin cells in other species.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.102-108
• /
• 2003

Before studying graft polymerization of PP(polypropylene) nonwoven fabrics by electron beam preirradiation method, mechanical properties, thermal properties and degree of crystallinity of original and electron beam irradiated PP nonwoven fabrics were investigated. Morphological surface changes of electron beam irradiated PP nonwoven fabrics were not observed. And the melting temperature and crystallinity of electron beam irradiated PP nonwoven fabrics also did not change as compared with untreated PP nonwoven fabrics. But the breaking strength of electron beam irradiated PP nonwoven fabrics decreased with increasing electron beam absorbed dose due to breakdown of some parts of polymer main chain.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.107-113
• /
• 2003

The branched polypropylene (b-PP) was prepared by melt blending process with initiator, antioxidant, and functional monomers to improve the melt strength through the melt grafting. The melt flow index (MFI) of the b-PP was increased with increasing the initiator content. On the introduction of the alkylamine as the branching agents the MFI of the b-PP was increased, while that of the b-PP with the pentaerythritol triacrylate (PT) was decreased. It may be caused by the chain scission of the i-PP backbone due to the reduced thermal stability of the i-PP on the melt blending. The MFI of the b-PP without the antioxidant was increased due to the chain scission occurred during the melt processing, while on the introduction of the antioxidant, the MFI of the b-PP was decreased. The crystallization temperature of the b-PP was higher than that of PP, which was attributed to the branched chain structure. It was found that the PT was the most effective functional monomers for enhancing the melt properties of the b-PP.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.24 no.1
• /
• pp.36-44
• /
• 2011

Objective : Propolis (PP) has been used in oriental medicine. PP has various biological activities. However, its immunoregulatory and anti-inflammatory activities have not been well studied. In this study, I investigated these activities of PP by using ovalbumin-induced allergic asthma in mice. Methods : To examine the effect of PP on allergic asthma, mice were sensitized with $100{\mu}g$ of OVA and 1mg of aluminum potasssium sulfate (Alum; Sigma) intraperitoneally on day 0 and 7. On day 14, mice were challenged on consecutive 3 days with 5% OVA and AHR was assessed 24 hours after the last challenge. To examine severity of AHR, I examined the population of eosinophiles and T cells in spleen and lung and cytokine production in T cells. Futhermore, I examined histological changes during the OVA-induced allergic asthma. Results and Conclusion : PP reduced the population of eosinophil and CD4+ T cells on the OVA-induced AHR mice model. PP also inhibited IL-4 production but increased INF-g production in T cells. These results suggest that PP may be beneficial material for allergic asthma.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.566-572
• /
• 2014

Maleic anhydride (MAH) grafted polypropylenes (PP) (MAH-g-PP) were prepared by changing MAH content and styrene monomer (SM)/MAH mole ratio with different type PP, using a twin screw extruder. The types of PP were isotatic PP (iPP), block PP (bPP), and random PP (rPP) and dicumyl peroxide (DCP) was used as an initiator. The graft degree of MAH was confirmed by the existence of carbonyl group (C=O) stretching peak at $3100cm^{-1}$ of FTIR spectrum. Thermal properties of MAH-g-PP and PP/MAH-g-PP/pulp composites were investigated by DSC and TGA. There was no district change in thermal properties of PP/MAH-g-PP/pulp composites. Based on tensile properties and SEM pictures for fractured surface of PP/MAH-g-PP/pulp composites, MAH-g-rPP was the best as the compatibilizer and optimum formulation was MAH content of 1.0 wt%, SM/MAH mole ratio of 1.0, and melt index (MI) of 25 g/10 min. The rheological properties of the composites were investigated by a dynamic rheometer. The complex viscosity, shear thinning effect, and water uptake incresed with pulp content.