• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.266-274
• /
• 1996

An experimental work was conducted to investigate the characteristics of the onset of flooding in vertical annuli with a direct injection mode using air and water. The onset of flooding was determined by means of pressure drop measurement while the air velocity was increased gradually under fixed liquid flow rates. Data of the onset of flooding were collected for various combinations of the tube size and the nozzle number. A theoretical analysis of the onset of flooding was also performed based on an envelope theory. The result shows that the onset of flooding in small-scale annuli can be predicted relatively well by the theory. A modified Wallis parameter was used to investigate the scaling effect of flooding phenomena in the annuli, indicating a relatively reasonable result. The number of nozzle has no effect on the flooding velocity when liquid was injected through 2, 3, 4 and 6 nozzles but the initiation of flooding was significantly expedited when 12 nozzles were employed for liquid injection.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1993

Nylon 6 based magnetic pellets for injection molding were produced using plasma arc melt-spun $Nd_{10.5}Fe_{79}Co_{2}Zr_{1.5}B_{7}$ powders. Two sorts of bonded magnets made of two different sizes of particles ($38~75\;\mu\textrm{m}$ and $75~150\;\mu\textrm{m}$) were prepared to determine critical volume fraction of magnet powders, and the magnetic prop erties of the magnets were discussed as a function of density. For the nylon fi based Nd-Fe-Co-Zr-B pellets made of $38~75\;\mu\textrm{m}$ particles, the critical volume fraction of powders 0.7 was obtained with the pellet density which is 90% of theoretical density while the magnets of $75~150\;\mu\textrm{m}$ showed the density of 87% of the theoretical value with the same volume fraction. The nylon (i magnets with the addition of 0.5 wt. % silicon oil only exhibited the best magnetic properties to have $_{i}H_{c}=8.8\;kOe,\;B_{r}=5.1\;kG$ and $(BH)_{max}=5.2\;MGOe$ which are of world class. An empirical relationship in predicting the magnet density with a known fraction ($V_s$) of loading powders was obtained such as ${\rho}(g/cm^{3})=1.1+K.V_{s}$ where the K ranges over 5.3~5.6 be ing dependent upon the particle size loaded.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.1
• /
• pp.50-60
• /
• 1998

I-123 labelled fatty acids are suitable for investigation of regional myocardial metabolism, so they are on the clinical trial. However, the precise properties of these materials are not characterized yet. We have synthesized phenylpentadecanoic acid and labeled this compound with I-123. The purpose of this study was to examine the stability, biodistribution, metabolism and SPECT imaging of [I-123]15-(p-iodophenyl)pentadecanoic acid(I-123-IPPA) that we made. The stability test of I-123-IPPA in serum of rat, mouse and human showed no free I-123 after 1 hour. In biodistribution study in mice for various time intervals after injection(5, 10, 15, 30, 60 minutes), uptake in myocardium was 14.5%ID/g(5 min), and 1.9%ID/heart(5 min), while uptake in muscles was 2.6%ID/g(5 min). Myocardium to blood ratio and myocardium to lung ratio increased for 5 min after injection and then decreased rapidly. Chromatographic data of rat blood and urine showed that little PPA was found in blood and urine at 15-20 min after injection. The myocardial I-123-IPPA SPECT images of a dog with myocardial infarction showed defects similar to those of Tc-99m-MIBI and F-18-FDG. These data suggest that I-123-IPPA is quite stable in vitro and shows favorable biodistribution in mice. SPECT imaging with I-123-IPPA demonstrated infarct zone as photon defect in dog model of myocardial infarction. I-123-IPPA may be used for the evaluation of fatty acid metabolism in clinical trials in Korea.

• International Journal of Oral Biology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2008

The present study investigated the role of peripheral group I, II, and III metabotropic glutamate receptors (mGluRs) in mustard oil (MO)-induced nociceptive response in the masseter muscles of lightly anesthetized rats. Experiments were carried out on male Sprague-Dawley rats weighing 300-350 gm. After initial anesthesia with sodium pentobarbital (40 mg/kg, i.p.), one femoral vein was cannulated and connected to an infusion pump for intravenous infusion of sodium pentobarbital. The rate of infusion was adjusted to provide a constant level of anesthesia. MO (30 ${\mu}L$) was injected into the mid-region of the left masseter muscle via a 30-gauge needle over 10 seconds. After 30 mL injection of 5, 10, 15, or 20% MO into the masseter muscle, total number of hindpaw-shaking behavior was monitored. Intramuscular administration of MO significantly produced hindpawshaking behavior in a dose-dependent manner, as compared with the vehicle (mineral oil)-treated group. Intramuscular pretreatment with 10 or 100 ng DHPG, a group I mGluRs agonist, enhanced MO-induced hindpaw-shaking behavior, while APDC (20 or 200 ${\mu}g$), a group II mGluRs agonist, or L-AP4 (2 ${\mu}g$), a group III mGluRs agonist, significantly reduced MO-induced nociceptive behavior. The antinociception, produced by group II or III mGluRs agonists, was abolished by pretreatment with LY341495, a group II mGluRs antagonist, or CPPG, a group III mGluRs antagonist, res-pectively. Based on these observations, peripheral mGluRs differentially modulated MO-induced nociceptive behavior response in the craniofacial muscle pain and peripheral group II and III mGluRs agonists could be used in treatment of craniofacial muscle nociception.

• Proceedings of the KSLP Conference
• /
• 2003.11a
• /
• pp.182-182
• /
• 2003

Objectives : The methods to treat glottic incompetence include thyroplasty type I, arytenoid abduction, and intracordal injection using various materials. The intracordal injection is easy and simple and does not require skin incision. In general, the grafted cartilage shows a high survival rate, a low absorption rate and small voluminous change. The authors performed injection of minced autologous auricular cartilage and fat using a Bruning injector in unilateral vocal cord palsy We evaluate the effect and safety of autologous auricular cartilage intracordal injection. Study Design : Retrospective study. Methods : Auricular cartilage was obtained by incising tragus vertically and it was minced with a scalpel and #15 blade. About 2g of abdominal fat was obtained by small periumbrical incision and cut into small pieces. The minced cartilage was put into a 1$m\ell$ injector and then the injector was filled with fat. The operation was conducted under laryngeal microscope. Minced cartilage was injected into the vocalis muscle at the junction of the middle and posterior third of the vocal fold. In three cases, we performed autologous cartilage intracordal injection. Results : We observed no postoperative complications, such as dyspnea, granulation, inflammation, in any of the cases. The voice was improved compared with the voice prior to operation in all cases. Conclusion : Although the cases are still limited and the observation period is short, we suggest that the autologous cartilage using the auricular cartilage is the ideal and new effective augmentative material in vocal cord palsy.

• Korean Journal of Animal Reproduction
• /
• v.19 no.3
• /
• pp.181-189
• /
• 1995

In this study, methods on fabrication of microtool and setting of micromanipulator were examined and relationship between first polar body extrusion rate and maturation time of follicular oocyte, enulceation rae and repetition of trial, and enucleation rate and maturation period were investigated. The results are as follows: 1. Suitable outside diameter of micropipette tube was 1mm. Holding pipette with less than diameter of oocyte was fitred for manipulation, and zona dissection needle was easily operated when its sharp-point had diameter of about 8 ${\mu}{\textrm}{m}$ and length of 300${\mu}{\textrm}{m}$. The injection pipette with 20~35${\mu}{\textrm}{m}$ outside diameter was adequate for injection of blastomere into perivitelline space. 2. Separation of blastomere was effective when zona pellucida had cut with zonadissection needle and the embryo was pipetted gently with the pipette that had narrower diameter than that of embryo until separation of blastomeres had completed. 3. The extrusion rate of first polar body was 78% during 20~24% hours incubation for maturation. 4. According to repetitions of micromanipulation, the enucleation rate was increased to 85% and the time required for enucleation of a oocyte was shortened to 3 min. 5. The extrusion rate of first polar body and enucleation rate were 82 and 76% respectively, in the group of the oocytes cultured for 22 hours. However in the group cultured for 24 hours, the extrusion rate of first polar body and enucleation rate were 53 and 100% respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.595-599
• /
• 2000

Fine wool sheep (n=18) maintained in a tropical environment were allocated to three treatment groups. Estrus was induced with two injections of $PGF_{2{\alpha}}$ (10 mg. im) at 10 days interval. Superovulation treatment started 2 days prior to the second injection of $PGF_{2{\alpha}}$. Each ewe was treated with a total dose of 25 units FSH (Super-OV) i.m. every 12 hover 3 days; Group 2 were also injected i.m. with 200 IU PMSG at the first injection of FSH; Group 3 was treated as in Group 2 and also with GnRH ($4{\mu}g$ Buserelin) at the onset of estrus. The ewes in estrus were mated with a fertile ram. Ovarian examination and recovery of embryo and ova were performed at laparoscopy and laparotomy on day 3 or 4 after mating. Data for onset of estrus, duration of estrus, number of corpora lutea (CL), number of unnovulated large follicle (LF), embryo recovery rate, embryo quality and fertilization recorded for the 3 groups. Ewes in the Group 1 set in estrus later (p<0.05; $50.0{\pm}7.29h$) than the ewes in Group 2 ($24.5{\pm}3.58$) and 3 ($32.5{\pm}3.58h$). The duration of estrus, ovarian size and ovarian response (number of CL and LF) did not differ significantly (p>0.05) among the 3 groups. The proportion of ewes with a superovulatory response (${\geq}2$ CL) was the lowest (50%) in Group 1 treated with FSH alone but ova/embryo recovery (100%) and fertilization (100%) was significantly (p<0.05) higher than Group 2 (58.3 and 85.7%, respectively) and Group 3 (48.6 and 50%, respectively). It is concluded that in tropical fine wool sheep, there is no difference in the 3 treatments for yield of good quality embryos but ovarian response and ovulation rate increased on additional use of PMSG and GnRH respectively to FSH alone.

• Journal of Pharmacopuncture
• /
• v.10 no.3
• /
• pp.77-83
• /
• 2007

Objectives The aim of this study is to investigate the effect of Sweet Bee Venom herbal acupuncture for patients with acute whiplash injury by Traffic Accident. Methods This clinical study was carried out 25 cases of acute whiplash injury patients which had been treatment in Woosuk oriental hospital from March, 2007 to September, 2007. Sweet bee venom herbal acupuncture(N=15) and normal saline(N=10) injected on the acupoints that were cervical area. I checked the VAS for the pain and ROM(range of motion) of the cervical. these were checked 3 times. one was before treatments, another was after 3 times treatments with sweet bee venom herbal acupuncture and normal saline injection, and the other was after 5 times treatments with sweet bee venom herbal acupuncture and normal saline injection. Results VAS score was significantly improved after 5 times treatments with the sweet bee venom herbal acupuncture compared to normal saline I.M. on the acupoints that was cervical area. There were significant changes in the sweet bee venom herbal acupuncture group with VAS and ROM check. Conclusions This study suggests that sweet bee venom herbal acupuncture can improve symptoms in patients with acute whiplash injury by traffic accident.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• Korean Journal of Animal Reproduction
• /
• v.22 no.2
• /
• pp.145-152
• /
• 1998

Many trials have been made to produce transgenic animals using sperm cells as a vector transferring foreign DNA into eggs, but reliable results are yet to be obtained (Brinster et al., 1989; Lavitrano et al., 1989; Bachiller et al., 1991; Sato et al., 1994). Recently, one of author(SO) demonstrated that mouse blastocysts derived from eggs fertilized by spermatozoa of male mice single injected with liposome-DNA complexes within the testis expressed thegene (Ogawa et al., 1995.) Here we report that a single injection of liposome-encapsulated DNAs into the testis of either male rats or mice resulted in successfully gene transfer to the postpartum progeny. The expression of mRNA derived from transgenes was also demonstrated in transgenic animals thus obtained. Further, the transmission of the exogenous gene to the descedants was confirmed in one line of transgenic rat up to F4 generation, indicating that the gene was stably incorporated into the germ line. Thus, direct single injection of foreign DNA into the testis provides a novel and convenient means to generate transgenic animals.