• 센서학회지
• /
• 제18권3호
• /
• pp.210-216
• /
• 2009

In this paper the tactile sensor system based on the bending loss of optical fiber sensor is presented. The sensor array was designed with fabric structure. The optical measuring system was composed of LED for light source and CCD camera for the signal light detector. Performance of this tactile sensor system was evaluated in various environments and compared with Harmon's design criteria. The result shows that load range is 3 g$\sim$100 g, resolution is 1.5 g, hysteresis error is 1.5%. The response linearity is good and flexibility of sensor array is excellent.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.606-609
• /
• 1995

Ferrite cores are often magnetized under DC-biased field because they have been intensively used in electronic circuits such as an inverter circuit and a switching regulator circuit. Thus we investigated the effects of DC-biased field on magnetic properties in the frequency range of DC-100kHz for two kinds of ferrite cores, TDK PC38 and TDK $H_{3}S$, which have different shapes of B-H loop from each other. The magnetic loss per cycle, W/f, in the $H_{3}S$ core decreased with increasing the strength of DC-biased field, although W/f in the PC38 core increased monotonically with DC-biased field. The observed decreasing tendency differs from the previous result for Si-Fe and ferrite cores, and can be attributed to decrease in eddy current loss as well as that in hysteresis loss.

• Composites Research
• /
• 제30권3호
• /
• pp.181-187
• /
• 2017

나노 및 마이크로 크기의 철(Fe), 마그네타이트($Fe_3O_4$) 및 니켈(Ni) 입자가 분산된 열가소성 폴리우레탄(TPU) 접착필름에서 각 금속의 크기 및 형상 그리고 피착재의 종류에 따른 접착필름의 유도가열 거동을 연구하였다. 연구결과 동일한 첨가량 및 유사한 입자 크기에서 철과 니켈이 분산된 열가소성 TPU 접착필름에 비해 마그네타이트가 분산된 TPU 접착필름의 발열이 높게 나타났다. 철과 니켈의 입자 크기가 자기장의 표면 침투 깊이(Penetration skin depth) 보다 클 경우 와전류에 의한 발열로 인해 입자 크기가 커질수록 초기 승온속도와 최고 온도가 증가하는 것을 확인하였다. 서로 다른 형태를 갖는 니켈 입자를 사용한 유도가열 실험 결과 편상(flake)의 입자가 TPU 접착필름에 분산되었을 때 자기이력(Magnetic hysteresis)에 의한 열 발생으로 가장 높은 발열이 나타남을 알 수 있었다. 또한 금속 입자가 분산된 TPU 접착필름이 서로 다른 피착재에 적용되었을 때 발열현상이 상이하게 나타났으며 피착재의 열전도도에 따른 결과를 확인하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.95.1-95.1
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1709_1710
• /
• 2009

본 논문은 DC전원을 AC전원으로 변환시키는 인버터 중 기존의 히스테리시스 전류제어방식과 제시된 히스테리시스 전류 제어방식에서 기준 전류가 증가 할 경우의 히스테리시스 오퍼레이터와 기준 전류가 감소 할 경우의 히스테리시스 오퍼레이터 두 개의 히스테리시스 오퍼레이터를 가지는 히스테리시스 전류 제어 방식을 제안하고 그것들의 시뮬레이션을 해보고, 이 두 가지 방식의 스위칭 손실 감소의 차이를 비교 분석을 한 것이 논문의 주제이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.342-345
• /
• 1999

This paper describes a current regulated PWM boost type rectifier based on modified trapezoidal PWM. Each switch of a converter has no switching for one third period of a fundamental line current. Therefore, the switching loss of the proposed scheme is less than that of the hysteresis current controller. Operating principle is described and controller. Operating principle is described and simulations and experiments are carried out.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.137-137
• /
• 2017

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.16-21
• /
• 2013

This paper presents a DC link voltage control method to reduce the ripple current and the switching loss in the sinusoidal current drive system for the wide-speed range PMSM. The DC link voltage of the three phase inverter in the sinusoidal current drive system is designed by the back-EMF voltage at maximum speed of the PMSM. In general, the drive systems have used the constant DC link voltage without reference to the motor speed. The current ripple causes hysteresis loss and makes noise. In addition, the switching loss on the inverter increases in proportion to the rise in the DC link voltage. In this paper, we propose the variable DC link voltage control method to reduce the current ripple in the PMSM drive system. We show reduction effect of the current repple and the switching loss through simulation results.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.444-449
• /
• 2015

Soft magnetic composites (SMCs) are especially suitable for the construction of low-cost, high-performance motors with 3-D magnetic fields. The main advantages of SMCs is that the iron particles are insulated by the surface coating and adhesive used for composite bonding, the eddy-current loss is much lower than that in laminated steels, especially at higher frequencies, and the hysteresis loss becomes the dominant component of core losses. These properties enable machines to operate at higher frequencies, resulting in reduced machine size and weight. In this paper, 3-D topologies are proposed that enable the application of SMCs to effectively reduce losses in high-speed permanent magnet (PM) motors. In addition, the electromagnetic field characteristics of the motor topologies are evaluated and compared using a non-linear finite element method (FEM) based on 3-D numerical analysis, and the feasibility of the motor designs is validated.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.170-172
• /
• 2008

Fe-6.5% Si alloys have good magnetic properties due to their high electrical resistivity, very low magneto-striction, and low crystalline anisotropy. Despite their strong potential, these alloys have seldom been used in magnetic applications because of the very poor ductility of Si-steel above 3.0 wt% Si [1-4]. It is difficult to achieve compressed Fe-6.5% Si powder cores with excellent properties because of the low density due to poor ductility. In compressed powder cores, high density is essential in order to obtain high magnetization and permeability. In this study, an attempt was made to produce Fe-3%Si powder cores because the Fe-3.0 wt% Si alloys have relatively good magnetic properties and room temperature ductility. Gas atomized Fe-3.0 wt% Si powder was compressed into toroid shape cores. By reducing the Si content to 3.0 wt%, the hysteresis loss could be greatly reduced and thus the total core loss could be minimized. The total core loss is 600 mW/$cm^3$ at 0.1 T and 50 kHz.