• Journal of the Mineralogical Society of Korea
• /
• v.19 no.1 s.47
• /
• pp.49-61
• /
• 2006

This study was undertaken to investigate the origin of suspended matter to induce turbidity water in Gachang dam in view of environmental geology. During the period from May to August 2004, field works and sampling were carried out three times at the dam and along its streams, and chemical and mineralogical analyses such as ICP, IC, particle size analyzer, XRD and SEM were made on water, soil and suspended matter in water. Electrical conductivity (EC), turbidity, the contents of cation and anion increase from upstream toward the dam mostly due to the geological factors such as weathring of the rocks causing the increase of the total ion content. Vermiculite, illite, kaolinite, quartz, feldspar and iron hydroxide are commonly found in suspended matters in water and soils. Finer particles (d10) in soil increase slightly toward downstream and the vermiculite content is highest in the dam water. Since geological differences are not significant, mineralogy are similar in suspended matters and soils. Clay mineral compositions present in suspended matters were alsmost the same as those in soils, indicating the origin of soils by weathering of host rocks and being transported to the dam by stream water.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2018

The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay is commonly used for analyzing the cell viability. In this study, effects of various solvents, different lights, and zinc protoporphyrin (ZnPP) on the chemical behavior of MTT formazan were investigated. The color response of MTT formazan in NaOH was highly pronounced; the absorbance of MTT formazan in 0.1 N NaOH at 550 nm was >2-fold higher than that in water, dimethyl sulfoxide (DMSO), methanol, and ethanol. MTT formazan in DMSO and NaOH (>0.1 N) was relatively stable under fluorescent and UV light at 365 nm; its rapid degradation was induced under UV light at 254 nm in all solvents. ZnPP degraded MTT formazan under light in a time- and concentration-dependent manner; MTT formazan in 0.1 N NaOH was the most sensitive to ZnPP, followed by DMSO. These results suggest that NaOH and DMSO might be suitable media for MTT formazan for monitoring photosensitizing properties.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.705-716
• /
• 2017

In this study, Indium-Titanium hydroxide particle with 0.5, 1.0, 1.5 wt% of $TiO_2$ were synthesized by sol process and adding the base, ITiO(Indium Titanium Oxide) particles were obtained by gelling at $200^{\circ}C$ and $500^{\circ}C$. The ITiO particle's size with gel process at $200^{\circ}C$ was smaller than ITiO particle's size with gel process $500^{\circ}C$. The ITiO particle with gel process at $200^{\circ}C$ was used to fabricate dense ITiO target. ITiO targets with 0.5, 1.0, 1.5 wt% of $TiO_2$ were fabricated and used to obtain ITiO thin films onto glass by sputtering. Among those sputtered ITiOs' thin films, ITiO thin film with 0.4 % of $O_2$ and 0.5 wt% of $TiO_2$ showed the lowest specific resistance, highest charge mobility and lowest carrier concentration. It was found the light transmittance of the ITiO film were increased highly compared to light transmittance of ITO (Indium Tin Oxide) thin film over Infrared wavelength ranges.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.28-37
• /
• 2020

In this study, the effect of precipitation temperature, ammonium chloride amount and addition method, vanadium and sodium hydroxide content of the solution on the precipitation of ammonium metavanadate were examined by using the sodium vanadate(NaVO₃) solution in alkali region as a starting material. As the pH of solution decreased, the addition amount of ammonium chloride and the vanadium content of the solution increased, the precipitation rate of ammonium metavanadate increased. In this research condition, the basic conditions for obtaining more than 90% of precipitation yield were 10,000mg/L of vanadium content, 2equivalents of ammonium chloride addition, room temperature, and 2 hours of precipitation time. The size of precipitated particles decreased with increasing precipitation rate. Especially when liquid ammonium chloride was injected into the solution, the precipitation rate was the slowest and the particle size of the precipitate was the largest. After the primary precipitation by adding ammonium chloride as a solid, the secondary precipitation was carried out by adding new reactants. At this time, the precipitation with added ammonium chloride solid was not affected by the precipitates present in the solution. However, when liquid ammonium chloride was added, new precipitate was deposited on the surface of the precipitate present in the solution, increasing its size. Due to the difference in ammonium metavanadate solubility to temperature, the precipitation temperature at the vanadium content of 10,000mg/L in the solution affected the precipitation rate of ammonium metavanadate and the precipitation temperature did not affect the precipitation rate at a high concentration of more than 30,000mg/L vanadium content in the solution.

• Journal of Adhesion and Interface
• /
• v.20 no.3
• /
• pp.87-95
• /
• 2019

In the present study, the effect of alkali treatment of rice straw on the flexural properties and impact strength of rice straw/recycled polyethylene composite was investigated. Alkali treatments were performed by means of two different methods at various sodium hydroxide (NaOH) concentrations. One is static soaking method and the other is dynamic shaking method. The composites were made by compression molding technique using rice straw/recycled polyethylene pellets produced by twin-screw extrusion process. The result strongly depends on the alkali treatment method and concentration. The shaking method done with a low concentration of 1 wt% NaOH exhibits the highest flexural and impact properties whereas the soaking method done with a high concentration of 10 wt% NaOH exhibits the highest properties, being supported qualitatively by the fiber-matrix interfacial bonding of the composites. The properties between the two highest property cases above-described are comparable each other. The study suggests that such a low concentration of 1 wt% NaOH may be used for alkali treatment of natural fibers to improve the flexural and impact properties of resulting composites, rather than using high concentrations of NaOH, 10 wt% or higher. Considering of environmental concerns of alkali treatment, the shaking method is preferable to use.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.412-417
• /
• 2007

This study was to elucidate the effects of layered double hydroxides(LDHs) application on the chemical properties of the soils along with the fate of the applied LDHs. The effects of LDHs application were compared with those of calcium carbonate widely used for the neutralization of acidic soils. Incorporation of LDHs into the soil resulted in higher pH value and $Mg^{2+}$ content in soil leachate than that of $CaCO_3$ treatment. There was no significant difference in water-soluble P content in both the treatments. However, $Al^{3+}$ and $Si^{4+}$ contents were decreased by LDHs and $CaCO_3$ treatment, even though a large amount of $Al^{3+}$ was released into soil solution with the disintegration of LDHs framework. LDHs structure in soil was gradually disintegrated from the its original layered structure under acidic condition of soil. Therefore, this study suggests that LDHs could be utilized as a carrier of functional substances to enhance the efficiency of various ago-chemicals without any ill effects on the soil environments.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.812-825
• /
• 2019

Two dolomite samples mined from the different mines were calcined using a batch-type microwave kiln ($950/60min^{\circ}C$) to produce $CaO{\cdot}MgO$. The hydration of the $CaO{\cdot}MgO$ samples shows different reactivity. MgO was separated by reacting with a strong acid cation exchange resin using the reactivity of the hydration properties of light dolomite ($CaO{\cdot}MgO$). Calcium ($Ca-(R-SO_3)_2$) was separated from the prepared $CaO{\cdot}MgO$ by the cation exchange resin ($CaO{\cdot}MgO:R-SO_3H=1:12mass%$). High purity MgO (higher than 94 mass %) with unburned $CaCO_3$ (1~2 mass %) was obtained by the separation process. The separated MgO was heated at $950^{\circ}C$ for 60 minutes to afford high purity MgO with MgO content higher than 96%. And High-grade $CaCO_3$ was prepared from the reaction with calcium adsorbed resin ($Ca-(R-SO_3)_2$) and NaOH, $CO_2$ gas.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.445-454
• /
• 2019

Layered double hydroxides (LDHs) nanoparticles have emerged as novel nanomaterials for bio-imaging applications due to its unique layered structure, physicochemical properties, and good biocompatibility. Bio-imaging is one of the most important fields for medical applications in clinical diagnostics and therapeutics of various diseases. Enhanced diagnostic techniques are needed to realize new paradigm for next-generation personalized medicine through nanoscale materials. When nanotechnology is introduced into bio-imaging system, nanoparticle probes can endow imaging techniques with enhanced ability to obtain information about biological system at the molecular level. In this review, we summarize structural features of LDH nanoparticles with current issues of bio-imaging system. LDH nanoparticle probes are also discussed through in vitro as well as in vivo studies in various bio-imaging techniques including fluorescence imaging, magnetic resonance imaging (MRI), positron emission tomography (PET), and computed X-ray tomography (CT), which will have the potential in the development of the advanced nanoparticles with high sensitivity and selectivity.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.133-141
• /
• 2019

High specific surface area zirconia with acid-basic property was synthesized by precipitation using reflux method or hydrothermal synthesis method using ammonium hydroxide solution as precipitant in the range of pH of Zr solution from 2 to 10. The prepared zirconia was characterized by the nitrogen adsorption, X-ray diffraction (XRD), isopropanol temperature programmed desorption (IPA-TPD), scanning electron microscopy and X-ray photoelectron spectroscopy, and the catalytic activity in the IPA decomposition reaction was correlated with the acid-basic properties. When using reflux method, high pH of Zr solution was required to obtain high fraction of tetragonal zirconia, and pure tetragonal zirconia was possible at pH 9 or higher. High pH was required to obtain high specific surface area zirconia, and the hydrous zirconia synthesized at pH 10 had high specific surface area zirconia of $260m^2g^{-1}$ even after calcination at $600^{\circ}C$. However, hydrothermal synthesis with high pressure under the same conditions resulted in very low specific surface area below $40m^2g^{-1}$ and monoclinic phase zirconia was synthesized. High pH of the solution was required to obtain high specific surface area tetragonal phase zirconia. In hydrothermal synthesis requiring high pressure, monoclinic zirconia was produced irrespective of the pH of the solution, and the specific surface area was relatively low. Zirconia with high specific surface area and tetragonal phase was predominantly acidic compared to basicity and only propylene, which was observed as selective dehydration reaction in IPA decomposition reaction, was produced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.200-207
• /
• 2019

Cement is one of the most commonly used materials in the construction and civil engineering industry. However, emissions of carbon dioxide generated during the production of cement have been linked to climate change and environment pollutants. In order to replace cement, many studies have been actively performed research to utilizing Blast Furnace Slag(BFS), which is a byproduct of the steel industry. This study aims to investigate the physiochemical properties of the BFS powder based grout to determine whether it can be used as an environment-friendly grout material. As a fine powder, BSF can be used instead of cement grout due to its potential hydraulic property. BSF has also been known for its ability to strengthen materials long-term and to densify the internal structure of concrete. In order to investigate the physicochemical properties of the BFS powder based grout as a grout material, in this study assessment tests were performed through a gel-time measurement, uniaxial compressive strength, and chemical resistance tests, and heavy-metal leaching test. Characteristics and advantages of the slag were studied by comparing slag and cement in various methods.