• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.223-233
• /
• 1998

The kinetic and mechanism of the hydrothermal reaction between lime and quartz used solid state reaction equations have been investigated. Hydrothermal reaction on the starting materials was carried out in an autoclave that quartz mixed with calcium hydroxide in CaO/$SiO_2$ ratio of 0.8-1.0 for 0.5-8 hour at saturated steam pressure of $180-200^{\circ}C$. The rate of reaction was given from the ratio of uncombined lime and quartz content to the total lime and quartz content. The rate of reaction was obtained the results by the Jander's equation $[1-(1-\alpha)^{1/3}]^N=Kt$. The reaction of lime is controlled mainly by the dissolution such as N=1, and the reaction of quartz is controlled mostly by the diffusion such as $N\risingdotseq2$. The rate of hydrothermal reaction in the calcium silicate hydrates system is suggested to be determined generally by the mass transfer through the product laver formed around the reactant particles. The rate equation for whole hydrothermal reaction is shown that it is converted into the rate determining step by the diffusion from the boundary reaction such as approximately $N=1-2$.

• Economic and Environmental Geology
• /
• v.15 no.2
• /
• pp.89-102
• /
• 1982

Several mines in Jeonnam produce the ores of having high SK number of refractoriness. Among those for 5 mines, this paper deals with the relationahip between SK number and mineral composition of the ore, and with the genesis of the deposits. 1. Byok-Song and Chon-Un Mine: Mineral compositions of the ores are chiastolite, chloritoid(monoclinic), kaolinite, sericite, diaspore, corundum, and quartz. The ores having SK number of 36 or 37, consist chiefly of chiastolite and diaspore and a little amount of kaolinite, sericite, corundum, chloritoid, and quartz. The ores having SK number of 33 or 34 consist of chloritoid, sericite, kaolinite, chiastolite, and diaspore. With increasing the amount of chloritoid and sericite, and decreasing the amount of diaspore and chiastolite, the SK number of the ores decreases. The deposit, originally high alumina-bearing shale of Chon-Un San formation, seems to be formed by contact metamorphism(forming of chiastolite), regional metamorphism(forming of monoclinic chloritoid), and hydrothermal replacement(forming of large crystal of diaspore veinlets). 2. Song-Sauk Mine: Mineral compositions of the ores are chiefly pyrophyllite and quartz and a little amount of kaolinite, dickite, diaspore, and pyrite. Many spherical inclusions containing in pyrophyllite deposits, consist chiefly of diaspore and kaolinite, The inclusions have the high SK number of 38. Amount of spherical inclusions is about 5 % to the whole pyrophyllite ores. The SK number of other pyrophyllite ore is less than 32. Quartz and pyrite are chief minerals lowering the SK number of the ore. The deposits have been formed by hydrothermal processes by replacing the siliceous tuff of Mesozoic age. Spherical inclusions consisting of diaspore and kaolinite, show the selective replacement of hydrothermal solutions to the materials of feldspar in tuff. 3. Seung-San Mine: Mineral compositions of the ores are chiefly kaolinite, dickite, diaspore, and quartz. But some part of the mine consists of alunite deposits. The ores having SK number of 35 or higher consist chiefly of kaolinite and diaspore and a little amount of quartz. With increasing the amount of quartz and decresing the amount of diaspore, the SK number of the ore decreases. The deposits have been formed by hydrothermal processes by replacing the siliceous tuff and quartz porphyry. 4. Wan-Do Mine: Mineral compositions of the ores are chiefly pyrophyllite and quartz. But some ore contains a little amount of diaspore, kaolinite, pyrite, and chloritoid. The ores having high SK number of 36 consist chiefly of diaspore and pyrophyllite. Pyrophyllite ore has a SK number of 32 or lower. Amount of quartz and pyrite decreases the SK number of ores in this mine. Rhyolite was replaced by the action of hydrothermal solutions forming the pyrophyllite deposits.

• Applied Chemistry for Engineering
• /
• v.31 no.6
• /
• pp.697-700
• /
• 2020

We report the synthesis and characterization of quartz nanocrystals (NCs). Quartz NCs were synthesized from the dissolution of amorphous silica nanoparticle precursors under the mild hydrothermal condition of ~250 ℃ and autogenic pressure. It was confirmed that the average size of the nanostructure with a highly crystalline phase of α-quartz can be tuned in a relatively narrow range from 407.5 to 826.2 nm with respect to the reaction time. α-Quartz NCs have potential uses for technological applications in optoelectronics, sensing, and rechargeable battery devices.

• Economic and Environmental Geology
• /
• v.15 no.4
• /
• pp.189-204
• /
• 1982

The Geodo mine is located in the southern limb of the Hambaeg syncline. Geology of the area consists of Paleozoic-Mesozoic sedimentary Rocks and Cretaceous igneous rocks. The important igneous rocks presumably related to skarnization and ore mineralization in the area, are the early granodiorite and the late porphyritic granodiorite. Two mineralogical types of ore deposits are recognized in the area. They are the Fe-Cu deposits in the Myobong formation and the Au-Bi-Cu deposits in the Hwajeol formation. Contact metamorphism due to granodiorite intrusion includes hornfelsization, exoskarnization and endoskarnization. Wall-rock alterations related to the Fe mineralization are grouped into the hydrothermal replacement skarnization and the hydrothermal filling skarnization. Another hydrothermal alteration is associated with the Cu mineralization. Various mineralogical analyses have been applied for the identification of minerals. They include optical microscopy, chemical analysis, etching test, X-ray diffraction, and infrared absorption spectroscopic analyses. The ore minerals in these ore deposits are classified into two groups;hypogene and supergene minerals. Hypogene minerals consist of magnetite, pyrite, chalcopyrite, and chalcocite. Supergene minerals consist of chalcocite, bornite, and geothite. Ore minerals show various kinds of ore texture: open-space filling, exsolution, replacement, and cementation texture. The gangue minerals consist of quartz, diopside, epidote, garnet and plagioclase in the hornfelsic zone, garnet, diopside, scapolite, actinolite, sericite, chlorite, quartz, and calcite in the skarn zone, and, epidote, chlorite, sericite, quartz, and calcite in the late hydrothermal alteration zone. This study shows that the Fe-Cu deposits are of metasomatic pipe type with the later hydrothermal fillings, and the Au-Bi-Cu deposits are of hydrothermal fissure-filling type. The mineralization is probably related to the intrusion of porphyritic granite.

• Economic and Environmental Geology
• /
• v.48 no.1
• /
• pp.15-24
• /
• 2015

Extensive base-metal and/or gold bearing ore mineralizations occur in the Pacitan mineralized district of the south western portions in the East Java, Indonesia. Metallic ore bodies in the Pacitan mineralized district are classified into two major types: 1) skarn type replacement ore bodies, 2) fissure filling hydrothermal ore bodies. Skarn type replacement ore bodies are developed typically along bedding planes of limestone as wall rock around the quartz porphyry and are composed mineralogically of skarn minerals, magnetite, and base metal sulfides. Hydrothermal ore bodies differ mineralogically in relation to distance from the quartz porphyry as source igneous rock. Hydrothermal ore bodies in the district are porphyry style Cu-Zn-bearing stockworks as proximal ore mineralization and Pb-Zn(-Au)-bearing fissure filling hydrothermal veins as distal ore mineralization. Sulfur isotope compositions in the sulfides from skarn and hydrothermal ore bodies range from 6.7 to 8.2‰ and from 0.1 to 7.9‰, respectively. The calculated ${\delta}^{34}S$ values of $H_2S$ in skarn-forming and hydrothermal fluids are 0.9 to 7.1‰ (5.6-7.1‰ for skarn-hosted sulfides and 0.9-6.8‰ for sulfides from hydrothermal deposits). The change from skarn to hydrothermal mineralization would have resulted in increased $SO_4/H_2S$ ratios and corresponding decreases in ${\delta}^{34}S$ values of $H_2S$. The calculated ${\delta}^{18}O$ water values are: skarn magnetite, 9.6 and 9.7‰; skarn quartz, 6.3-9.6‰; skarn calcite, 4.7 and 5.8‰; stockwork quartz, 3.0-7.7‰; stockwork calcite, 1.2 and 2.0‰; vein quartz, -3.9 - 6.7‰. The calculated ${\delta}^{18}O_{water}$ values decrease progressively with variety of deposit types (from skarn through stockwork to vein), increasing paragenetic time and decreasing temperature. This indicates the progressively increasing involvement of isotopically less-evolved meteoric waters in the Pacitan hydrothermal system. The ranges of ${\delta}D_{water}$ values are from -65 to -88‰: skarn, -67 to -84‰; stockwork, -65 and -76‰; vein, -66 to -88‰. The isotopic compositions of fluids in the Pacitan hydrothermal system show a progressive shift from magmatic hydrothermal dominance in the skarn and early hydrothermal ore mineralization periods toward meteoric hydrothermal dominance in the late ore mineralization periods.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.421-434
• /
• 1999

Gas and chemical compositions of fluid inclusions in quartz some of Au-Ag, Pb-Zn-Cu and W-Mo mineral deposits in South Kores were analyzed to interpret the sources of ore fluid and the depositional condition of ore minerals in base-metal ore deposits. Fluid inclusions in quartz from the gold and silver mines are characterized by $CO_2$ rich fluids which have a wide range in $CH_4 \;and\; CO_2$ contents ($CH_4/CO_2$=0.001-0.225). The $CO_2$ rich but $CH_4$-poor nature of the fluid reflects the high fo2 condition during the mineral precipitation. The C2H6 is detected in hydrothermal quartz vines in metasedimentary rocks from the Jeonjoo-il, Youngbokari and Taechang mines. The $CH_4 /CO_2$ rations in W-Mo bearing quartz veins range from 0.005 to 0.214, which is similar with those in Au-Ag mines. However, skarn formation stage. Fluid inclusions, A relatively good correlation between Na and Cl contentrations reflects varible salinity in the fluid inclusion, it is suggested that the chemistry of promary magmatic hydrothermal fluids has changed during post-magmatic alteration and/or wall rock alteration processes. The content of gas compositions also depends on the kinds of country rocks, supporting above conclusion.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.331-342
• /
• 1985

The Dongbo tungsten-molybdenum deposits are fissure-filling veins emplaced in granites of late Cretaceous age. Integrated field, mineralogic and fluid inclusion studies were undertaken to illuminate the characters and origin of the ore deposits. Mineral paragenesis is complicated by repeated fracturing, but four distinct depositional stages can be recognized; (I) tungsten-molybdenum minerals-quartz-chlorite stage, (II) iron-oxide and sulfides-quartz stage, (III) iron -oxide-base metal sulfides-sulfosalts-quartz-carbonates stage, (IV) barren rhodochrosite-zeolite stage. Fluid inclusion studies were carried out for stage I quartz and stage III quartz, sphalerite and calcite. Fluid inclusion studies reveals highly systematic trends of homogenization temperature and salinity throughout the mineralization. Ore fluids during stage I were complex, NaCl rich brine and salinity reached values as high as 34.4 weight percent equivalent NaCl, but the later ore fluids were more dilute and reached to 9.7 weight percent equivalent NaCl during stage III. Intermittent boiling of ore fluid during stage I is indicated by the fluid inclusions in stage I quartz. Depositional temperatures and pressures during stage I range from $520^{\circ}C$ to $265^{\circ}C$and from 600 to 400 bars. Homogenization temperatures of the stage III quartz, sphalerite and calcite range from $305^{\circ}C$ to $190^{\circ}C$. Fluid inclusion data from the Dongbo mine are nearly similar to those from other hydrothermal tungsten deposits in the Kyeongsang basin. Depositional temperature and salinity of ore fluids during precipitation of tungsten-molybdenum minerals in Dongbo mine were much higher, but $CO_2$ contents were much lower than those from hydrothermal tungsten-molybdenum deposits of late Cretaceous plutonic association in central parts of Korean peninsula.

• Journal of the Korean earth science society
• /
• v.23 no.1
• /
• pp.97-104
• /
• 2002

Mulgeum, Yangseong, Maeri and Kimhae iron ore deposits in Gyeongnam Province are hydrothermal skarn type magnetite ore deposits in propylitized andesitic rock near the contact with Cretaceous Masanite. Symmetrical zoned skarns are commonly developed around the magnetite veins. The skarn zones away from the vein are quartz-garnet skarn, epidote skarn and epidote-orthoclase skarn. Oxygen isotope analyses of coexisting minerals from andesitic rock, Masanite and major skarn zones, and of magnetite, hematite and quartz were conducted to provide the information on the formation temperature, the origin and the evolution of the hydrothermal solution forming the iron ore deposits. Becoming more distant from the ore vein, temperatures of skarn zones represent the decreasing tendency, but most ${\delta}^{18}O$ and ${\delta}^{18}O_{H2O}$ values of skarn minerals represent no variation trend, and also the values are relatively low. Judging from all the isotopic data from the ore deposits, the major source of hydrothermal solution altering the skarn zones and precipitating the ore bodies was magmatic water derived from the deep seated Masanite. This high temperature hydrothermal solution rising through the fissures of propylitized andesitic rock was mixed with some meteoric water, and occurred the extensive isotopic exchange with the propylitized andesitic rock, and formed the skarns. During these processes, the temperature and ${\delta}^{18}O_{H2O}$ value of hydrothermal solution were lowered gradually. At the main stage of iron ore precipitation, because all the alteration was already finished, the new rising hydrothermal solution formed only the magnetite ore without oxygen isotopic exchange with the wall rock.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.1
• /
• pp.46-55
• /
• 1999

Fluid inclusions in granite and hydrothermal quartz indicate that three fluids have affected the Sannae granite. The earliest fluid is represented by three-phase aqueous fluid inclusions with high salinity (38 to 46 wt.% NaCl equiv.). It was exsolves from a crystallizing melt and trapped at a relatively high-pressure condition. The secong fluid is represented by two-phase aqueous fluid inclusion with low entectic temperatures (< $-40^{\circ}C$). low- to moderate salinity (3 to 24.0 wt.% NaCl equiv.) and high homogenization temperatures$ ($309^{\circ}C$$473^{\circ}C$)($. This fluid was trapped at higher pressures than 300-500 bars and precipitated molybdenite and wolframite in quartz veins. It was probably generted by fluid-host rock interactions since they show a wide range of salinity within a narrow range of homogenization temperatures. The final fluid is represented by an aquenous fluid boiling that separated into high-salinity (34-38 wt.% NaCl equiv.) and low-salinity fluid (0 to 8.7 wt.%) at $303-376^{\circ}C$ and 50-150 bars. These boiling fluids precipitated euhedral quartz in miarolitic cavities. The compositions of the final fluid was rather complex in the $H_2$O-NaCl-KCI-$FeCl_2$ system. The Sannae granite was a locus for repeated fluid events including magmatic fluids during the final stage of crystallization, the convection of hydrothermal fluids causing a fluid ascending, fluid boiling, and the local W-Mo mineralization and formation of miarolitic cavities due to thermal, tectonic and compositional properties of the felsic granite.

• Economic and Environmental Geology
• /
• v.10 no.1
• /
• pp.1-18
• /
• 1977

Chongyang tungsten ore deposits, one of the most important tungsten mines in South Korea, me open space filling hydrothermal vein deposits embedded in Precambrian biotite gneiss and, Cretaceous (?) granite porphyry. Some wolframite-bearing quartz veins are closely associated with -quartz porphyries which strike about $N15^{\circ}-25^{\circ}W$ and dip $800^{\circ}SE$ to vertical. Mineralization took place in near vertical vein systems of 5 to 2000 meter long in the biotite gneiss and granite porphyry stock during early Cretaceous and Tertiary (?) period. The hydrothermal mineral paragensis has indicated that there were two major stages: vein and vug stages. The principal vein mineral is wolframite in a gangue of quartz with small amount of fluorite, pyrite, beryl and carbonate minerals. Present in minor amounts are molybdenite, bithmuthinite, native bismuth, arsenopyrite, galena, chalcopyrite, pyrrhotite, sphalerite and scheelite. Fluid inclusion study from the minerls at Chongyang mine reveals that vein stage fluids attained a temperature range of $200^{\circ}C-355^{\circ}C$ and vug stage $160^{\circ}C-350^{\circ}C$. The filling temperatures show the higher range of $200^{\circ}-355^{\circ}C$ in quartz and $280^{\circ}C-348^{\circ}C$ in beryls, whereas the lower emperature range of $283^{\circ}C-295^{\circ}C$ in rhodochrosite and $160^{\circ}-253^{\circ}C$ in fluorites. These temperatures are in reasonably good agreement with mineral paragnesis in this ore deposits. Volfamite minerals were analysed for major components. $WO_3$, MnO and FeO by wet chemical method. Chemical analysis indicates that they contain 70.56-71.54% $WO_3$, 8.52-10.01% MnO and 10.00-11.58% FeO. MnO/FeO ratios of wolframites shows the range of 0.78-0.94 which maybe indicates a comparatively high temperature type of hydrothermal deposits.