• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.651-655
• /
• 2005

Enzymatic hydrolysis of shark (Squatina oculata) cartilage (SC) was optimized by response surface methodology (RSM) for chondroitin sulfate (CS) preparation. Among 11 commercial proteases, Maxazyme NNP showed highest productivity (CS yield per enzyme cost) of CS. Optimal hydrolysis conditions determined by RSM were 1.63% and 2.87 hr for enzyme concentration and hydrolysis time ($r^2\;=\;0.9527$, p<0.0l), respectively and highest yield of hydrolysate under the conditions was 42.3%. The yield ($43.1{\pm}2.1%$) and CS content ($24.8{\pm}0.1%$) of hydrolysate at optimal condition verified statistical optimization of SC enzymatic hydrolysis was valid.

• Journal of Applied Biological Chemistry
• /
• 제49권3호
• /
• pp.86-89
• /
• 2006

The novel tetranuclear nickel (II) complex is a high rate accelerator in promoting hydrolysis of phosphate diesters. Nickel-bound bis-nitrophenyl phosphate (BNPP) can be $10^4$ times more reactive than the unbound BNPP. The large rate of enhancements by the complex slightly under basic condition has shown high catalytic activity in phosphate diester cleavage. The bell-shaped pH-rate profile indicated that the nickel-oxide form of the tetranuclear complex or its kinetic equivalent was the active species for cleaving BNPP. The catalytic hydrolysis between tetranuclear nickel (II) complex and phosphate diester proceeds via the formation of bidentate coordination of the anionic phosphate to the Ni (II) atom. This reveals that the complex has the possibility as artificial nuclease.

• 한국식품영양과학회지
• /
• 제24권3호
• /
• pp.427-433
• /
• 1995

The optimal condition for hydrolysis of oyster was evaluated with proteases using response surface methodology(RSM). Among 11 commerical proteases, APLTM 440 was selected as the suitable protease for producing oyster hydrolysate on the basis of cost per unit enzyme activity. The effect of autolysis on degree of hydrolysis in oyster was negligible comparing to that of APL 440 protease treatment. From RSM and ridge analysis, the conditions favoring the highest degree of hydrolysis were pH 9.95, 61.1$^{\circ}C$, 2.64 hr reaction time, 49.2% substrate, and 0.35% enzyme/substrate ratio. Oyster hydrolysate prepared under optimal conditions shwoed virtually 51.98% of hydrolysis.

• Archives of Pharmacal Research
• /
• 제25권4호
• /
• pp.453-456
• /
• 2002

Tonin(Persicae Semen) is the herb medicine that contains amygdalin as a major ingredient. Amygdalin in water is decomposed into benzaldehyde, HCN, and glucose by emulsin, a hydrolysis enzyme in tonin. A useful and practical method for the optimum extraction condition of amygdalin without enzymatic hydrolysis is required. The extraction yield of amygdalin of natural formula to nin was 0.1 % from crude powders, 1.4% from small pieces, 3.5% from half pieces and 2.4% from whole pieces. The extraction yield of amygdalin of outer shell-eliminated to nin was 0.3% from crude powders, 1.4% from small pieces, and 3.5% from half pieces and whole pieces respectively. The extraction yield of amygdalin was most high when using the size larger than half.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.114.2-114.2
• /
• 2011

Furfural is a versatile derivative. It can be utilized for a building-block of furfuryl alcohol production and a component of fuels or liquid alkanes. But in bio-process, furfural is a critical compound because it inhibits cell growth and metabolism. Furfural could be converted from xylose and usually produced from biomass in which hemicellulose is abundant. In this study, furfural production from miscanthus was performed and utilization of miscanthus residue was consequently conducted. At first, hydrolysis for investigation of miscanthus composition and furfural production was performed using sulfuric acid. Previously, we optimized dilute acid pretreatment condition for miscanthus pretreatment and the condition was found to be about 15 min of reaction time, 1.5% of acid concentration and about $140^{\circ}C$ of temperature and 60% (about 7 g/L) of xylose was solubilized from miscanthus. Using the xylose, furfural production was conducted as second step. Approximately $160{\sim}200^{\circ}C$ of temperature was accompanied with the hydrolysis for pyrolysis of biomass. When the investigated condition; $180^{\circ}C$ of temperature, 20 min of reaction time and 2% of acid concentration was operated for furfural production, furfural productivity was reached to be 77% of theoretical maximum. After reaction, residue of miscanthus was utilized as feedstock of ethanol fermentation. Residue was well washed using water and saccharified using hydrolysis enzymes. Hydrolysate (glucose) from saccharification was utilized for the carbon source of Saccharomyces cervisiae K35.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.101-107
• /
• 1995

케탈이나 아세탈반응에 의하여 이루어진 1, 3-디옥솔란 고리가 산수용액 중에서 불안정해 쉽게 가수분해되는 성질을 이용하여 소수부로는 지방산의 탄화수소사슬을 친수부로는 소디움 카르복시산(Soap)을 도입하여 분해 후 계면활성을 띠지 않는 분해성 계면활성제이다. 이 화합물의 수용액에 대한 표면장력은 31dyne/cm였고, 임계미셀농도는 $1.0{\times}10^{-3}mol/L$이었다. 기포력은 비교적 좋지 않았으며, 유화력은 콩기름보다 벤젠에서 양호하였다. 또한 이 화합물의 산분해 특성을 1wt% 수용액과 벤젠 사이의 계면장력 변화에 의하여 측정한 결과 pH 1 ${\sim}$ 4범위에서 약 300분 안에 모두 가수분해됨을 확인하였다.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.52-58
• /
• 2011

Proton-NMR spectroscopic method was applied to kinetic study of concentrated sulfuric acid hydrolysis reaction, especially focused on 2nd step of acid hydrolysis with deferent reaction time and temperature as main variables. Commercial xylan extracted from beech wood was used as model compound. In concentrated acid hydrolysis, xylan was converted to xylose, which is unstable in 2nd hydrolysis condition, which decomposed to furfural or other reaction products. Without neutralization steps, proton-NMR spectroscopic analysis method was valid for analysis of not only monosaccharide (xylose) but also other reaction products (furfural and formic acid) in acid hydrolyzates from concentrated acid hydrolysis of xylan, which was the main advantages of this analytical method. Higher temperature and longer reaction time at 2nd step acid hydrolysis led to less xylose concentration in xylan acid hydrolyzate, especially at $120^{\circ}C$ and 120 min, which meant hydrolyzed xylose was converted to furfural or other reaction products. Loss of xylose was not match with furfural formation, which meant part of furfural was degraded to other undetected compounds. Formation of formic acid was unexpected from acidic dehydration of pentose, which might come from the glucuronic acid at the side chain of xylan.

• KSBB Journal
• /
• 제13권3호
• /
• pp.312-319
• /
• 1998

The dilute-acid pretreatment/hydrolysis of hemicellulose in oak wood using a percolation reactor was investigated. The experimental conditions ranged 160∼180$^{\circ}C$ and 0.05∼0.2 wt.% sulfuric acid. XMG(xylan+mannan+galactan) recovery was higher when sulfuric acid was used as leaching solvent than water. Also it was important for high XMG recovery to keep leaching temperature higher after reaction. XMG recovery was decreased as the size of wood chips was increased. At an optimum condition (reaction condition= 170$^{\circ}C$, 0.1% sulfuric acid, 1ml/min, 10min, leaching condition=0.1% sulfuric acid, 2mL/min, 20 min), the product yield and the sugar concentration were about 92% and 2.7%, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.505-505
• /
• 2009

The object is to optimize the best condition of organosolv pretreatment process with sulfuric acid as a catalyst. As a material, Pitch pine (Pinus rigida) was ground and sieved through 40-mesh screen, and Celluclast and $\beta$-glucosidase were used as enzymes for enzymatic hydrolysis. Pretreatment processes were carried out in the minibomb, and 20 g of materials with 200 ml of 50% ethanol solution (v/v) with 1% sulfuric acid as a catalyst. Pretreatment temperature was varied from $150^{\circ}C$ to $190^{\circ}C$, and time was varied from 0 to 20 min. Then, residual materials were used for enzymatic hydrolysis. The best conditions were selected by estimating followed enzymatic hydrolysis rate and degradable rates after pretreatment process. The highest value of enzymatic hydrolysis rate was obtained as 55 - 60% at 160 and at $180^{\circ}C$, but the value decreased under more severe conditions. As the residual rates decreased under severe conditions, it infered that the decrease of sugar contents limits enzymatic hydrolysis rates. Combined with enzymatic hydrolysis rate, degradable rates and H-factors, the temperatures at $160^{\circ}C$ for 20 min and at $180^{\circ}C$ for 0 min were concluded as the optimized conditions where have the lowest H-factor value for considering energy input.

• 한국식품저장유통학회지
• /
• 제23권3호
• /
• pp.413-421
• /
• 2016

본 연구는 폐기되는 돈혈을 식품소재로 활용하고자 단백질 가수분해효소 5종을 처리하여 품질특성 변화를 조사하였다. 그 결과 KMFP-15(E)로 가수분해할 때 pH 7.3, 총 고형분 함량 $24.3^{\circ}Brix$ 및 유리아미노산 함량 4,944 mg%로 가장 높은 고형분 함량 및 유리아미노산 함량을 나타내었다. KMFP-15(E) 농도에 따른 영향을 조사한 결과 처리농도가 증가함에 따라 총 고형분 함량 및 유리아미노산이 증가하였으며, 유리아미노산은 KMFP-15(E) 0.2% (w/v)첨가구에서 7,224 mg%로 0.3% (w/v)첨가구와 유의적인 차이를 나타내지 않아 0.2% (w/v)로 설정하였다. KMFP-15(E)의 가수분해 시간에 따라 유리아미노산 함량은 4시간에서 7,404 mg%로 가장 높게 나타났으며, 시간이 경과할수록 감소하는 경향을 보여 최적 가수분해시간은 4시간으로 설정하였다. 상기 설정된 가수분해 조건을 통해 제조된 돈혈 분말(PBHP)에는 조단백질 및 아미노산과 철분, 칼륨, 아연 등 다량의 무기질이 함유되어 있는 것으로 나타났으며 특히, 철분의 함량은 1,983 mg%로 높게 나타나 식품소재로 활용 가능한 것으로 나타났다. 이상의 결과 폐기되는 돈혈의 활용방안으로 다양한 가수분해조건중 효소 KMFP-15(E) 0.2% (w/v)를 첨가하여, 4시간에서 가수분해 하였을 때 전반적 품질 특성이 가장 우수하여 향후 돈혈을 이용해 단백질 보충, 아미노산소재 및 철분강화제 등의 식품 및 의약품 소재로의 고부가가치 창출이 가능할 것으로 판단되었다.