• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.83-93
• /
• 2014

This research was carried out for suggesting design criteria and procedure for maximizing flood control capacity by building flood control facilities like flood retention basin built in connection with existing facilities in order to cope with increased uncertainty due to factors such as urbanization and climate change. We suggested the procedure for the analysis under the various scenarios applicable for the cases of determining retention basin capacity as provision for the flood water level increase in main river channel or estimating flood water level reduction effect when retention basin capacity is given. Procedure for estimating design flood hydrograph at any duration using Intensity-Duration-Quantity (IDQ) originated from the existing IDF, and its application example were provided. Based on rainfall estimated by the IDQ analysis, it is possible to calculate an equivalent peak hydrographs under various scenarios, e.g. lower frequency hydrograph under same rainfall duration with water level higher than existing hydrograph, hydrograph with same peak and higher volume due to increased rainfall duration, hydrograph with higher peak and volume than existing hydrograph, etc.

• Water for future
• /
• v.15 no.3
• /
• pp.49-55
• /
• 1982

The purpose of this study is to examine the methods of estimation, comparing U.S. SCS method and $\Phi$-index with effective rainfall. And also comparision was made among SCS method, Chow method and Mockus method as to the peak discharge of design storm hydrograph by small river basin. Hydrological data of the Shin river basin which was used in this study and the results of study are as follow; 1) As a result of applying the SCS method to determine the effective rainfall out of total rainfall, it turned out that the everage CN of the basin as obtained by the analysis of hydrologic soil-cover complex was varied as follows; AMC-I was 27.9%, AMC-II 16.4%, AMC-III 8.1% less than the value given by SC method using discharge measurement. 2) The comparision of effective rainfall by the ungaged SCS method with that of gauged $\Phi$-index method showed that the $\Phi$-index method showed that the $\Phi$-index method gives large value by 4.7% to those given by hydrograph. The result of analysis by the SCS method resulted in great difference from discharge measurement. 3) The comparision of SCS method, Chow method, and Mockus method showed that dimensionless hydrograph of SCS method and Chow method were close to the peak discharge of the gauged unit hydrograph, while the other methods gave far different results. 4) Attempts were made, for a better adaptation to the Shin river basin, to introduce lag time formula constant of dimensionless hydrograph of the SCS method by using the peak discharge of the gauged flow hydrograph.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.143-148
• /
• 2010

In this study, the mixed model of the surface rainfall-runoff analysis using grid data and Illudas model was applied to the urban watershed of Bulgang river. After the surface rainfall-runoff was estimated with GIS data, the runoff hydrograph was calculated using network analysis at Jeungsan bridge, which is the final output of watershed. Estimated runoff hydrograph in this study was compared to the observed runoff hydrograph which is converted from the water stage at Jeungsan bridge. The relative errors of total runoff volume and peak discharge showed the range values of 11.70%~16.30% and 1.10%~6.96%, and then the difference of peak times had the values of less than 1 hour for 4 storms. Therefore, the mixed model in this study could be considered to estimate the runoff hydrograph for the prevention of disasters in urban watershed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.1
• /
• pp.13-23
• /
• 1979

The predictien of a design flood hydrograph at a particular site on a river may be based on the derivation of a discharge or stage hydrograph at an upstream section, together with a method to route this hydrograph along the rest of the river. In order to limit this investigation to cases where the assumption like uniform rainfall may be reasonably valid, the derivation of unit hydrographs has been limited to catchment with an area less than 500 km2. Consequently, flood routing methods provide a useful tool for the analysis of flooding in all but the smaller catchment, particularly where the shape of the hydrograph as well as the peak value is required. The author, therefore, will introduce here a flood routing method on the open channel with a peak discharge of the catchment area concerned. The importance of being able to route floods accurately is also reflected in the large number of flood routing method which have been developed since the year 1900. There are the modified puls method, Steinberg method, Goodrich method, Ekdahl method, Tatum's mean continuously Equation, wisler-Brater method, Muskingum, chung, and Muskingum-cunge (M-C) method and so on. The author will try to introduce a flood routing method which is revised Muskingum-cunge method. In calculating flood routing by the M-C method, whole variable parameters on the river were assumed to almost uniform values from the upstream to the downstream. In the results, the controlled flood rates at the 40km downstream on the river is appeared to decrease 22m$^3$/sec or 12 percent of the peak flood 170m$^3$/sec.

• Journal of Korea Water Resources Association
• /
• v.32 no.4
• /
• pp.427-435
• /
• 1999

The Clark unit hydrograph is a three parameter synthetic unit hydrograph procedure that can be used in flood hydrology. The present work is an attempt to estimate parameters of the Clark model in ungaged basin by means of relationships that provides for the hydrologic similarity. The time area concentration curve was determined by analytic method and the Clark model was generalized by being made dimensionless form. Calculation of the concentration time was made with the formula fractal concept used, and the storage coefficient was estimated by the empirical and regional equation. Evaluation on Dongok basin was performed to prove the validity of the proposed model. The derived hydrograph predicted the observed hydrograph fairly well.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.4
• /
• pp.59-72
• /
• 1987

Although long-term runoff analysis is important as much as flood analysis in the design of water works, the technological level of the former is relatively lower than that of the latter. In this respect, the precise estimation model for the volume of successive runoff should he developed as soon as possible. Up to now, in Korea, Gajiyama's formula has been widely used in long-term runoff analysis, which has many problems in applying in real situation. On the other hand, in flood analysis, unit hydrograph method has been exclusively used. Therefore, this study aims at trying to apply unit hydrograph method in long-term runoff analysis for the betterment of its estimation. Four test catchment areas were selected ; Maesan area in Namlum river as a representative area of Han river system, Cheongju area in Musim river as one of Geum river system, Hwasun area in Hwasun river as one of Yongsan river system, and Supyung area in Geum river as one of Nakdong river system. In the analysis of unit hydrograph, seperation of effective rainfall was carried out firstly. Considering that effective rainfall and moisture condition of catchrnent area are inside and outside of a phenomenon respectively and the latter is not considered in the analysis, Initial base flow(qb)was selected as an index of moisture condition. At the same time, basic equation(Eq.7) was established, in which qb can take a role as a parameter in relating between cumulative rainfall(P) and cumulative loss of rainfall(Ld). Based on the above equation, computer program for estimation model of qbwas seperately developed according to the range of qb, Developed model was applied to measured hydrographs and hyetographs for total 10 years in 4 test areas and effective rainfall was estimated. Estimation precision of model was checked as shown in Tab- 6 and Fig.8. In the next stage, based on the estimated effective rainfall(R) and runoff(Qd), a runoff distribution ratio was calculated for each teat area using by computerised least square method and used in making unit hydrographs in each test area. Significance of induced hydrographs was tested by checking the relative errors between estimated and measured runoff volume(Tab-9, 10). According to the results, runoff estimation error by unit hydrograph itself was merely 2 or 3 %, but other 2 or 3 % of error proved to be transferred error in the seperation of effective rainfall. In this study, special attentioning point is that, in spite of different river systems and forest conditions of test areas, standardized unit hydrographs for them have very similar curve shape, which can be explained by having similar catchinent characteristics such as stream length, catchinent area, slope, and vegetation intensity. That fact should be treated as important factor ingeneralization of unit hydrograph method.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.34-47
• /
• 1995

It is experienced fact as a regular annual event that the structure to he designed on unreasonable flood for the agricultural structures including reservoirs have been brought not only loss of lives, but also enormous property damage. For the solution of this problem at issue, this study was conducted to develop an optimal runoff hydrograph model by comparison of the peak flows and time to peak between observed and simulated flows derived by linear time-invariant and linear time-variant models under the condition of having a short duration of heavy rainfall with uniform rainfall intensity at nine small watersheds which are within the range of 55.9 to 140.7 square kilometers in area in Han, Geum, Nagdong and Yeongsan Rivers. The results obtained through this study can be summarized as follows. 1. Storage constants and Gamma function arguments were calculated within the range of 1.2 to 6.42 and of 1.28 to 8.05 respectively by the moment method as the parameters for the analysis of runoff hydrograph based on linear time-invariant model. 2. Parameters for both linear time-invariant and linear time-variant models were calibrated with nine gaged watershed data, using a trial and error method. The resulting parameters including Gamma function argument, N and storage constant, K for linear time-invariant model were related statistically to watershed characteristic variables such as area, slope, length of main stream and the centroid length of the basin. 3. Average relative errors of the simulated peak discharge of calibrated runoff hydrographs by using linear time-variant and linear time-invariant models were shown to be 0.75 and 5.42 percent respectively to the peak of observed runoff hydrographs. Correlation coefficients for the statistical analysis in the same condition were shown to be 0.999 and 0.978 with a high significance respectively. Therefore, it can be concluded that the accuracy of a linear time-variant model is approaching more closely to the observed runoff hydrograph than that of a linear time-invariant model in the applied watersheds. 4. Average relative errors of the time to peak of calibrated runoff hydrographs by using linear time-variant and linear time-invariant models were shown to be 16.44 and 19.89 percent respectively to the time to peak of observed runoff hydrographs. Correlation coefficients in the same condition were also shown to be 0.999 and 0.886 with a high significance respectively. 5. It can be seen that the shape of simulated hydrograph based on a linear time- variant model is getting closer to the observed runoff hydrograph than that of a linear time-invariant model in the applied watersheds. 6. Two different models were verified with different rainfall-runoff events from data for the calibration by relative error and correlation analysis. Consequently, it can be generally concluded that verification results for the peak discharge and time to peak of simulated runoff hydrographs were in good agreement with those of calibrated runoff hydrographs.

• Water for future
• /
• v.18 no.3
• /
• pp.265-270
• /
• 1985

The prediction of a design-flood hydrograph at a particular site on a river may be based on the derivation of discharge or stage hydrograph at an upstream section, togeater with a method to route this hydrograph along the rest of river. On the other hand, flood routing methods provide a useful tool for the analysis of flooding in all but the smaller catchment, and these methods are largely stored into hydrological method and hydraulic method. Although the Muskingum Method as a hydrological method ignores dynamic effects on the flood wave, Muskingum-Cunge Method based on hydraulic method is possible to improve the method so that it gives a good approximation to the solution of the linear convective-diffusion equation. This is made on the basis of the finite diffeience equation for the Muskingum Method. In the study, the outflows predicted by Muskingum-Cunge Method are campared with the observed outflows of the Pyung Chang River.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.196-196
• /
• 2016

Landslide dam failure presents as a severe natural disaster due to its adverse impact to people and property. If the landslide dams failed, the discharge of a huge volume of both water and sediment could result in a catastrophic flood in the downstream area. In most of previous studies, breaching process used to be considered as a constructed dam, rather than as a landslide dam. Their erosion rate was assumed to relate to discharge by a sediment transport equation. However, during surface erosion of landslide dam, the sediment transportation regime is greatly dependent on the slope surface and the sediment concentration in the flow. This study aims to accurately simulate the outflow hydrograph caused by landslide dam by overtopping through a 2D surface flow erosion/deposition model. The lateral erosion velocity in this model was presented as a function of the shear stress on the side wall. The simulated results were then compared and it was coherent with the results obtained from the experiments.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.293-303
• /
• 2018

Sumber Jaya (54,194 hectares) is a district in West Lampung, Indonesia, located at the upper part of Tulang Bawang watershed. This watershed is one major water resource for Lampung Province, but has become a focal point of discussion because of the widespread conversion of forestland to coffee plantations and human settlements which lead to environmental and hydrological problems. This research aimed to evaluate Sumber Jaya watershed affecting by rapid land use change using hydrological methods as a base for watershed management. Nested catchment structure consisted of eight sub-catchments was employed in this research to assess scaling issues of land use change impacts on rainfall-runoff connections. Six tipping bucket rain gages were installed on the hill slopes of each sub-catchment and Parshall flumes were installed at the outlets of each sub-catchment to monitor stream flow. First, unit hydrograph that expressed the relationship of rainfall and runoff was computed using IHACRES model. Second, unit hydrograph was also constructed from observations of input and response during several significant storms with approximately equal duration. The result showed that most of the storm flow from these catchments consisted of slow flow. A maximum of about 50% of the effective rainfall became quick flow, and only less than 10% of remaining effective rainfall which was routed as slow flow contributed to hydrograph peaks; the rest was stored. Also, comparing peak responses and recession rates on the hydrograph, storm flow discharge was generally increased slowly on the rising limb and decreased rapidly on the falling limb. These responses indicated the soils in these catchments were still able to hold and store rain water.