• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.483-491
• /
• 1992

Plasma silicon oxynitride film has been applied as a final passivation layer for semiconductor devices, because it has high resistance to humidity and prevents from alkali ion's penetration, and has low film stress. Structure properties of plasma silicon oxynitride film have been studied experimentally by the use of FT-IR, AES, stress gauge and ellipsometry. In this experiment,Si-N bonds increase as NS12TO/(NS12TO+NHS13T) gas ratio increases. Peaks of Si-N bond, Si-H bond and N-H bond were shifted to high wavenumber according to NS12TO/(NS12TO+NHS13T) gas ratio increase. Absorption peaks of Si-H bond were decreased by furnace anneal at 90$0^{\circ}C$. The atomic composition of film represents that oxygen atoms increase as NS12TO/(NS12TO+NHS13T) gas ratio increases, to the contrary, nitrogen atoms decrease.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.88-95
• /
• 2013

Effects of beating and water immersion time on fiber swelling and paper properties were elucidated for the fundamental study of producing high bulk paper. Chemical pulps were beaten for various freeness and the beaten pulp was immersed in water up to 24 hours. Fiber swelling was evaluated by measuring water retention value (WRV). It was found that fiber swelling, bulk and paper strength were quickly changed at the initial stage of beating. Immersion in water did not significantly increase WRV, paper density and strength, implying that soaking in water alone could not effectively swell fiber wall. In order to swell further, hydrogen bonds between fibrils in fiber wall and hence fiber wall structure shall be broken by mechanical force during beating.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.738-742
• /
• 1998

A new polyamide was prepared from 4,4'-(hexafluoroisopropylidene)di-aniline and 4-[NN-bis(2-carboxyethyl)] amino-4'-nitrostilbene. This polymer was cast into thin films by spin coating cyclohexanone solution. After being poled, the electro-optic coefficients of electrode poled polymer films were measured by the reflection measurement technique using an incident laser beam of 1.3 Jim. The film poled at the field strength of 1.2 V/μm exhibited the electro-optic coefficient (r33) of 5.9 pm/V. The relaxation behavior of the poled polymer film was compared with other reported polymers bearing the same NLO chromophores. Due to stiff and highly polar nature of the backbone and also due to formation of interchain hydrogen bonds, this polymer reveals a slower relaxation characteristics. The polymer is amorphous and soluble in various organic solvents.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.546-552
• /
• 1990

Enthalpies of solution of aniline, pyridine and benzylamine in iso-dielectric mixtures of methanol with acetonitrile (AN), nitrobenzene (NB) and nitromethane (NM) have been measured calorimetrically. The solute-solvent interaction was analyzed using a model developed by Waghorne et al. and found that the relatively weak base, aniline, tended to behave anomalously, especially in the NB and NM binary systems by forming bidentate hydrogen bonds between the two-$NH_2$ hydrogens and the two-$NO_2$ oxygens. Pyridine and benzylamine were found to be preferentially solvated by methanol in all the binary mixtures.

• Archives of Pharmacal Research
• /
• v.12 no.1
• /
• pp.52-57
• /
• 1989

The structure of cinmetacin was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from a mixture of acetone and water in orthorhombic, space group $P2_12_12_1$, with Z=4, a=35.681(8), b=9.482(2), c:5.071(1) ${\AA}$, $D_x=1.352 g/cm^3$, and $D_m=1.35g/cm^3$. The structure was solved by direct method and refined by least-squares procedure to the final R value of 0.036 for 1441 observed reflections ($F{\geq}3{\sigma}(F)$). The carboxyl group of the molecule is nearly perpendicular to the indole ring. The dihedral angle between indole ring and phenyl group is $64.5^{\circ}$. The molecules are linked together via O(1)-H ----O(3) hydrogen bonds, and arranged along 2-fold screw axis in the crystal. The intermolecular contacts are the normal van der Waals' forces.

• Archives of Pharmacal Research
• /
• v.11 no.2
• /
• pp.127-133
• /
• 1988

The crystal structure of fenbufen was determined by X-ray diffraction techniuques. The compound was recrystallized in orthorhombic crystal system, space group $Pca2_1$ a = 31. 918(10), b = 5.550 (2), c = 15.078 (9) ${\AA}, D_m$= $1.26, {\D_x$= 1.264 g/$\textrm{cm}^3$, and Z = 8. The structure was solved by direct methods and refined by least squares procedure to the final R value of 0.051 for 1780 independent reflections. Two molecules in the asymmetric unit are related by a pseudo center of symmetry and dimerized via O-H...O hydrogen bonds. The carbonyl group attached to the phenyl ring is nearly coplanar to the ring. In the crystal the molecules are arranged in paralle stacks in the a direction.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.194-200
• /
• 1990

Various mechanistic aspects of the A2 hydrolysis of methyl acetimidate were explored using the MNDO method. As in thecorresponding reactions of acetamide and methyl carbamate, a proton transfer pre-equilibrium exists between the N-protonated and the O-protonated tautomers, and the subsequent hydrolysis proceeds from the more stable N-protonated form. Of the two reaction pathways, the $A_{AL}2$ path is favored in the gas phase and in concentrated acid solutions, whereas the $A_{AC}2$ path is favored in less acidic solutions with a stable cationic tetrahedral intermediate formed in the rate determining step. Negative charge development on the alkoxy oxygen in the transition state suggested a rate increase with the increase in the electron withdrawing power of the alkoxy group. Calculations on the reaction processes with AM1 indicated that MNDO is more reliable in this type of work, although AM1 is better than MNDO in reproducing hydrogen bonds.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.203-210
• /
• 1999

Structural characteristics of isotactic p-alkylphenol acetaldehyde novolak resins with methyl, t-butyl, and t-octyl as the p-substituent and p-t-butylphenol aldehyde novolak resins with methylene, ethylidene, and propylidene as the linkage were calculated using molecular mechanics and molecular dynamics. The five p-alkylphenol aldehyde resins were found to have common structural characteristics that hydroxyl groups of the p-alkylphenols cluster in the center of the molecule by intramolecular hydrogen bonds of hydroxyl groups of the adjacent p-alkylphenols and the alkyl groups are extended out. Distances between oxygen atoms and between p-carbon atoms of the adjacent p-alkylphenols become longer as the size of the p-substituent increases from methyl to toctyl. Bond angles of the linkage built between the adjacent p-alkylphenols become wider by increasing the p-substituent size and by decreasing the linkage size.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.300-303
• /
• 1985

To understand the nature of the linkage between chromophore and apoprotein in the photoreceptor of Stentor coeruleus, a conformational analysis has been carried out on the dipeptide amides linked to the chromophore hypericin using an empirical potential function. The conformational energies for the dipeptide amides of Glu (OHyp)-X-NHMe, where X = Leu, Phe, Asp, and Tyr, have been calculated to investigate the influence of peptide residues in stabilizing conformers. It was found that the increase of acidity of hypericin upon photoexcitation may be facilitated by the formation of intramolecular hydrogen bonds between hydroxyl groups of hypericin and carbonyl groups of peptide backbone, and that the stabilities of dipeptide amides do not significantly depend on peptide residues directly linked to chromophore.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.345-351
• /
• 1999

The structures, the energetics, and the spectra of K+(H2O)3 have been studied at HF and MP2 levels with the basis set of triple-zeta plus two sets of polarization functions (TZ2P) for water molecules. Two structures considered are 3+0 (D3), and 2+1 (C2v). The 2+1 (C2v) has two hydrogen bonds between the primary hydration and the secondary hydration shell water molecules. They have similar binding energy and enthalpy. The most stable conformation of K+(H2O)3 is entropy driven as shown in Na+(H2O)5 and in Na+(H2O)6 cases. The 3+0 (D3) conformation is the most stable at 298 K and at 1 atm, based on Gibbs free energy changes (ΔGr). The thermal contributions to the enthalpy and the Gibbs free energy are corrected for the low frequency modes. The corrected ΔGr is in good agreement with the experimental value. Vibrational frequencies of two conformations are revealed as their characteristics.