• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.863-868
• /
• 2011

This paper presents a method to achieve a synchronous positioning objective for a dual-cylinder electro-hydraulic system with friction characteristics. The control system consists of a VSC (Variable Structure Controller) for each of the hydraulic cylinders and a PID (Proportional-Integral-Derivative) feedback controller. The PID controller is used for controlling the non-synchronous error generated by both cylinders when motion synchronization is carried out. To enhance the position-tracking performance of the individual cylinders friction characteristics is modeled in model, based on the estimated friction force. The simulation and experimental results show that the proposed method can effectively achieve the objective of position synchronization in the dualcylinder electro-hydraulic system, with maximum synchronization error with ${\pm}2\;mm$.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.157-163
• /
• 2014

In this paper, a robust MRAC (model reference adaptive control) scheme is applied to control an electrohydraulic positioning system under various loads. The inverse dead-zone compensator in the control system cancels out the dead-zone response, and an integrator added to the controller provides good position-tracking ability. LQG/LTR (linear quadratic Gaussian control with loop transfer recovery) closed-loop model is used as the reference model for learning the MRAC system. LQG/LTR provides a systematic technique to design the linear controller that optimizes the objective function using some compromise between the control effort and the system performance in the frequency domain. Different external load tests are performed to investigate the effectiveness of the designed MRAC system in real time. The experimental results show that the tracking performance of the proposed system is highly accurate, which offers considerable robustness even with a large change in the load.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.75-82
• /
• 1998

Autonomous speedsprayer operation was conducted using a fuzzy controller combined with a DGPS. The signal of DGPS receiver and signals of four ultrasonic sensors were processed in real time. The speedsprayer was steered with two levers controlled by two hydraulic cylinders. The fuzzy controller has two inputs; direction of running obtained from the DGPS receiver and distance from trees measured by ultrasonic sensors. The operation times of the hydraulic cylinders were inferred as outputs of the fuzzy controller. Field test results showed that the speedsprayer could be autonomously operated by the developed fuzzy controller including turning operation in the end of the tree row. The ultrasonic sensors contributed a little to performance of the autonomous operation, but the speedsprayer could avoid trees or obstacles in emergent situations with them.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.90-95
• /
• 2007

Conventional bridge inspection involves the physical positioning of an inspector by the hydraulic telescoping boom of a "snooper truck" thereby providing visual access to bridge components. The process is time consuming, hazardous, and may be affected by lighting conditions, Therefore, it is of great interest that an automated and/or teleoperated inspection robot be developed to replace the manual inspection procedure. This paper describes the advanced bridge inspection robot system under development and other related activities currently undergoing at the Bridge Inspection Robot Development Interface (BIRDI). BIRDI is a research consortium with its home in the Department of Civil and Environmental System Engineering at Hanyang University at Ansan. Its primary goal is to develop advanced robot systems for bridge inspection and monitoring for immediate field application and commercialization. The research program includes research areas such as advanced inspection robot and motion control system, sensing technologies for monitoring and assessment, and integrated system for bridge maintenance. The center embraces 12 institutions, which consist of 7 universities, 2 research institutes, and 3 private enterprises. Research projects are cross-disciplinary and include experts from structural engineering, mechanical engineering, electronic and control engineering. This research project will contribute to advancement of infrastructure maintenance technology, enhancement of construction industry competitiveness, and promotion of national capacity for technology innovation.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.363-371
• /
• 2019

Thousands of demersal fishes inhabit in the waters around Korea and most of them are overexploited. One of reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the Danish seine fishery from 1960s to 2010s. Gross tonnage was decreased stably, but the horse power was increased annually. The length of ground rope, warp and hand rope was somewhat longer, but changed a little. Color fish finder was utilized from the mid-1960s and positioning system was used five years later. A hydraulic line hauler were introduced in the mid-1980s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting researchers. Therefore, the relative fishing power index in the Danish seine fishery increased stably from 1.0 in 1970 to 1.0 in 1980, to 1.2 in 1990, to 1.3 in 2000 and to 1.3 in 2010. The results are expected to contribute to reasonable fisheries stock management.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.29-38
• /
• 2001

A navigation system was developed for autonomous guidance of a combine. It consisted of a DGPS, a machine vision system, a gyro sensor and an ultrasonic sensor. For an autonomous operation of the combine, target points were determined at first. Secondly, heading angle and offset were calculated by comparing current positions obtained from the DGPS with the target points. Thirdly, the fuzzy controller decided steering angle by the fuzzy inference that took 3 inputs of heading angle, offset and distance to the bank around the rice field. Finally, the hydraulic system was actuated for the combine steering. In the case of the misbehavior of the DGPS, the machine vision system found the desired travel path. In this way, the combine traveled straight paths to the traget point and then turned to the next target point. The gyro sensor was used to check the turning angle. The autonomous combine traveled within 31.11cm deviation(RMS) on the straight paths and harvested up to 96% of the whole rice field. The field experiments proved a possibility of autonomous harvesting. Improvement of the DGPS accuracy should be studied further by compensation variations of combines attitude due to unevenness of the rice field.

• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.83-91
• /
• 2005

본 논문은 초음속 환경에서 운용되는 원통형 비행체가 비행중 경험하는 공력하중 및 공력가열 현상을 지상에서 유사하게 모사하기 위한 내열구조시험 기법 및 시험결과에 대하여 기술하였다. 시험 중 시험 구조물의 자세를 공중에서 제어하거나 시험 중지 중 시험 구조물을 지지할 목적으로 스프링을 이용하는 특별한 자세제어장치가 설계되었다. 시험 구조물에 공력하중과 열하중을 부가하기 위하여 유압식 외력하중부가 장비와 전기식 열부가 장비를 사용하였다. 특히, 복사방식의 수백 개 석영램프가 열부가장비에 응용되었으며, 이들을 이용하여 여러 가지의 열특성 시험조건이 해석조건과 유사하게 지상에서 성공적으로 구현되었다. 연구결과 본 내열구조강도시험기법은 외력 및 극심한 열하중에 노출된 원통형 구조물의 구조적 건전성을 실험적 방법에 의거 지상에서 검증하거나 설계 개선에 필요한 공학자료를 획득하는데 적합한 방법임이 입증되었다.