• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.90-95
• /
• 1996

This study was performed to calculate the degration rate coefficient, operating parameters to meet the effluent standards, and the temperature adjustment coefficients to each parameter of pollution by seasonal variation of concentration and temperature of influent in livestock wastewater treatment by sequencing batch reactor process in field scale. The followings are the conclusions that were derived from this study. 1. In the field, temperature of livestock wastewater in reactor was 20.3$\circ$C in summer and 6.0$\circ$C in winter. The ratio of BOD:TKN: T-P in influent was 100:80:7. BOD loadings in winter and spring were 0.26 and 0.43 kg $BOD/m^3$ day, respectively. Those in summer and fall were 0.25 and 0.13 kg $BOD/m^3$ day, respectively. 2. The degradation rate coefficient for TKN was larger in summer and fall in which temperature was high than that in which temperature was high than that in winter and spring in which concentration was high. On the contrary, the phosphorus uptake rate was larger in winter and spring than that in summer and fall. 3. The hydraulic retention time in winter and spring was longer than that in summer and fall. Especially, in order to meet the standard for TKN of 120 mg/l in winter in which temperature of wastewater was 6.0$\circ$C, as the MLSS concentration was increased from 4, 000 to 7, 000 mg/l, the hydraulic retention time was increased from 212 to 121 hours. But, in order to shorten that less than 121 hours for the economical wastewater treatment, countermeasure to increase temperature of wastewater in the reactor should be considered. 4. the temperature adjustment coefficients for BOD, $COD_{Mn}$, TKN and T-P were 1.0241, 1.0225, 1.0541 and 1.0495, respectively. Namely, the treatment of TKN was most sensitively affected by temperature. For the purpose of the effective removal of nitrogen and phosphorus which are sensitive to temperature, it is necessary to keep the temperature of livestock wastewater more than 20$\circ$C which is the temperature of it in summer.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• 한국습지학회지
• /
• 제23권4호
• /
• pp.342-351
• /
• 2021

이 연구의 목적은 MODFLOW를 이용하여 신규 지하수 관정 추가로 인한 영향을 예측하기 위해 지하수의 변화와 지하수두 또는 매개변수 민감도에 미치는 영향을 평가하는 것이다. 이 연구에서는 동해시의 전천유역 하류지역을 대상으로 두 가지 조건을 모의하였다. 첫 관측된 지하수위값을 이용하여 자연상태 정류 흐름을 모의 할 수 있는 매개변수를 결정한 후, 이미 설치되어 있는 관정까지 포함하여 모형을 구축하였다. 구축된 모형을 이용하여 지하수 관정의 추가 설치에 따른 영향을 모의하였다. 두 번째는 동해시의 물 부족 문제를 해결하기 위한 방법으로 관정을 계획하고 모의하였다. 모의 결과, 최대 지하수위 저하는 첫 번째 대수층에서 약 0.35m로 나타났으며, 이는 해수의 침입은 발생하지 않는다는 것과 관정의 계획이 물 부족의 해결책으로 무리가 없다는 것을 나타낸 것이다. 마지막으로 MODFLOW에서 사용되는 매개변수의 민감도 분석을 실시하였다. 민감도 분석 결과에서 초기 수두, 비등방성 계수, 수리전도도 및 일반수두경계가 민감한 매개변수로 판명되었다.

• 한국농공학회지
• /
• 제27권2호
• /
• pp.23-37
• /
• 1985

This studies were carried out to get characteristics of frequency distribution, probable flood flows according to the return periods, and the correlation between return periods and those length of records affect the Risk of failure in the annual maximum series of the main river systems in Korea. Especially, Risk analysis according to the levels were emphasized in relation to the design frequency factors for the different watersheds. Twelve watersheds along Han, Geum, Nak Dong, Yeong San and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Type 1 extremal distribution was newly confirmed as a good fitted distribution at selected watersheds along Geum and Yeong San river basin. Three parameter lognormal Seom Jin river basin. Consequently, characteristics of frequency distribution for the extreme value series could be changed in connection with the watershed location even the same river system judging from the results so far obtained by author. 2. Evaluation of parameters for Type 1 extremal and three parameter lognormal distribution based on the method of moment by using an electronic computer. 3. Formulas for the probable flood flows were derived for the three parameter lognormal and Type 1 extremal distribution. 4. Equations for the risk to failure could be simplified as $\frac{n}{N+n}$ and $\frac{n}{T}$ under the condition of non-parametric method and the longer return period than the life of project, respectively. 5. Formulas for the return periods in relation to frequency factors were derived by the least square method for the three parameter lognormal and Type 1 extremal distribution. 6. The more the length of records, the lesser the risk of failure, and it was appeared that the risk of failure was increasing in propotion to the length of return periods even same length of records. 7. Empirical formulas for design frequency factors were derived from under the condition of the return periods identify with the life of Hydraulic structure in relation to the risk level. 8. Design frequency factor was appeared to be increased in propotion to the return periods while it is in inverse proportion to the levels of the risk of failure. 9. Derivation of design flood including the risk of failure could be accomplished by using of emprical formulas for the design frequency factor for each watershed.

• 터널과지하공간
• /
• 제18권1호
• /
• pp.44-57
• /
• 2008

본 연구에서는 암반의 수리적 거동을 다공성매체로 간주하고 개별균열 연결망을 통해 구해진 암반의 등가수리전도도와 수리이방성을 입력 자료로 하여 유한요소법 프로그램을 사용한 2차원 수리해석을 수행하였다. 입력변수에 의한 결정론적인 해를 얻게 되는 연속체 해석의 단점과 입력자료의 불확실성을 보완하기 위하여 입력변수에 대한 민감도 분석을 실시하고, 터널과 단층파쇄대의 다양한 위치관계를 고려한 가상의 시나리오 단면에 대하여 해석을 수행하였다. 이때 암반의 포화 불포화 특성을 반영하기 위한 수리전도도함수와 체적함수율 함수를 구하여 해석에 반영하였다. 해석대상지역은 경부고속철도 13-3공구, 원효터널의 고산 습지(무제치 3늪, 대성뒷늪, 대성큰늪) 하부통과구간과 간천계곡하부 통과구간으로서 부정류 해석을 통하여 터널 굴착 후 10년 경과시까지의 터널 내 유입수량과 인접지역의 지하수위를 살펴봄으로써 수리학적 안정성과 습지 및 계곡에 미치는 영향을 검토하였다. 그라우팅을 시행하지 않은 경우에는 무제치늪과 대성뒷늪 주변의 지하수위가 강하하지만, 그라우팅을 통해 수리전도도를 1/50 이하로 감소시킬 경우 지하수위는 강하하지 않는 것으로 나타났다. 그리고 단층파쇄대가 터널에 인접하여 위치하더라도 터널을 관통하지 않는 경우에는 단층파쇄대가 터널내 유입수량에 미치는 영향은 크지 않은 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제47권12호
• /
• pp.1121-1134
• /
• 2014

유사발생 잠재성 및 토양침식으로 인한 유사발생 위험성이 높은 것으로 평가된 내성천유역을 대상으로 강우-유출-토양침식-유사이송으로 이어지는 유역단위의 분포형 모형을 구축하였으며 유출과 유사농도 모의 결과에 주요한 영향을 미치는 조도계수 및 투수계수의 민감도 분석을 실시하였다. 모의결과, 내성천유역의 토지 피복이 숲인 지역의 조도계수를 0.4에서 0.45로 변경하여 지표수 유출 유속을 감소시킴으로써 향석 지점에서의 유출곡선에 미치는 영향을 분석하였으나 유출수문곡선의 변화에 영향을 미치지 않는 것으로 나타났으며 평균 유사농도 값과 유사농도의 범위에 있어서도 모의 결과가 근소하게 증가하나 유의한 변화는 없는 것으로 나타났다. 투수계수에 대한 민감도 분석 결과, 투수계수 값을 저감 시킬수록 총 유출량 및 첨두 유출량은 점차 증가하는 것으로 나타났다. 유사농도 모의의 경우에도 투수계수를 저감시킬수록 모든 지점에서 평균 유사농도 및 유량에 따른 유사농도 범위가 증가하였으며, 향석 지점의 경우 투수계수를 50% 저감하였을 때 유사 농도 모의 값이 유량-유사량 관계식에 의해 계산된 값과 가장 근사한 것으로 나타났다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.1-6
• /
• 2016

Typically, the seat of an automotive vehicle generally includes a horizontal seat-cushion portion and a vertical seat-back portion that is operatively connected to the seat-cushion portion. The seat may include a recliner for the reclining of the seat-back portion relative to the seat-cushion portion by the seat occupant. An energy absorber or damper can also be provided for the seat-back portion. Because the recliner is configured to be released at a relatively high speed, and it results in an impact at the end of a folding stroke, the damper needs to dissipate energy as the seat back moves with respect to the seat cushion; therefore, the role of the seat damper in the automotive-seat design is important. In this paper, the mechanism of an hydraulic-type automotive-seat damper is investigated, and the torque characteristic is simulated according to the design-parameter variations such as the orifice area and the working-fluid properties.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.117-123
• /
• 2001

To improve control performance of a non-linear system, many other reserches have used the sliding model control algorithm. The sliding mode controller is known to be robust against nonlinear and unmodeled dynamic terms. However, this algorithm raises the inherent chattering caused by excessive switching inputs around the sliding surface. Therefore, in order to solve the chattering problem and improve control performance, this study has developed the sliding mode controller with a perturbation estimator using the observer-based fuzzy adaptive network. The perturbation estimator based on the fuzzy adaptive network generates the control input of compensating unmodeled dynamics terms and disturbance. And the weighting parameters of the fuzzy adaptive network are updated on-line by adaptive law in order to force the estimation errors converge to zero. Therefore, the combination of sliding mode control and fuzzy adaptive network gives rise to the robust and intelligent routine. For evaluation control performance of the proposed approach, tracking control simulation is carried is carried out for the hydraulic motion simulator which is a 6-degree of freedom parallel manipulator.

• International Journal of Fluid Machinery and Systems
• /
• 제9권3호
• /
• pp.229-236
• /
• 2016

Exergetic analysis was introduced in optimization of a rotating equilateral triangular internal cooling channel with staggered square ribs to maximize the net exergy gain. The objective function was defined as the net exergy gain considering the exergy gain by heat transfer and exergy losses by friction and heat transfer process. The flow field and heat transfer in the channel were analysed using three-dimensional Reynolds-averaged Navier-Stokes equations under the uniform temperature condition. Shear stress transport turbulence model has been selected as a turbulence closure through the turbulence model test. Computational results for the area-averaged Nusselt number were validated compared to the experimental data. Three design variables, i.e., the angle of rib, the rib pitch-to-hydraulic diameter ratio and the rib width-to-hydraulic diameter ratio, were selected for the optimization. The optimization was performed at Reynolds number, 20,000. Twenty-two design points were selected by Latin hypercube sampling, and the values of the objective function were evaluated by the RANS analysis at these points. Through optimization, the objective function value was improved by 22.6% compared to that of the reference geometry. Effects of the Reynolds number, rotation number, and buoyancy parameter on the heat transfer performance of the optimum design were also discussed.