• 한국수산과학회지
• /
• 제28권5호
• /
• pp.607-623
• /
• 1995

A numerical model of hydraulic resistance by hanging aquaculture facilities is developed and applied to a model basin and a field. A drag stress term formulated by the quadratic law of drag force is introduced Tn the equations of motion for a two-dimensional depth-averaged flow. In the model basin, numerical experiments ave tarried out for the various shape of obstructions, string density and layout of facilities etc.. The flow pattern around the facilities is affected sensitively by the density of string and the layout of facilities. On the other hand, the velocity decay due to the hanging oyster aquaculture facilities is observed in Kamak bay, where the maximum velcocity decay rate is $25\%$ in spring tide. The model is also applied to the field, Kamak bay. The velocity decay rate in the model is comparable with the field measurement data. The velocity decreases around the down-stream area of the facilities, .hut it increases in the other region. The water elevation decreases during the flood and it increases during the ebb.

• 한국해안해양공학회지
• /
• 제8권4호
• /
• pp.269-273
• /
• 1996

계단식 호안 축조에 사용할 수 있는 신형 유공블록이 제시되었다. 또한, 2차원 수리모형실험을 통하여 신형 블록을 사용한 유공 계단식 호안에서의 월파량 면화를 파악하였다. 신형 유공 계단식 호안은 재래식 무공 계단식 호안에서보다 월파량이 작아 향후 친수성 호안의 한 대안이 될 수 있음이 입증되었다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1552-1564
• /
• 2002

Meter-in, meter-out and bleed-off circuits are widely utilized in order to adjust the speed of a hydraulic actuator by using a flow control valve and in order to regulate the pressure of a hydraulic volume by using a simple on-off valve. In these circuits, a relief valve serves either to maintain constant system pressure or to protect the system from over-pressure loading. The relief valve of a bleed-off circuit is the second case frequently undergoing on-off action during operation. It makes the analysis of the pressure control characteristics of the circuit highly difficult. In this paper, steady-state flow rate, pressure, heat loss and efficiency of the three circuits are reexamined and basic experiments far obtaining the characteristics of a pump and relief valve are conducted. Finally, simple empirical first-order dynamic models of decreasing and increasing pressure were separately proposed and verified by comparison with experiment. As the result, the basis for the theoretical analysis of the pressure control characteristics of a bleed-off circuit using a simple on-off valve is established.

• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.461-470
• /
• 2011

Abrupt and gradual levee breach analyses on the flat domain were implemented by laboratory experiments and numerical simulations. To avoid the reflective wave from the side wall the experiment was performed in a large domain surrounded by waterway. A numerical model was developed for solving the two-dimensional gradual levee breach flow. The results of the numerical simulation developed in this study showed good agreement with those of the experimental data. However, even if the numerical schemes effectively replicated the trends of the observed water depth for the first shock, there were little differences for the second shock. In addition, even though the model considered the Smagorinsky horizontal eddy viscosity, the location and height of the hydraulic jump in the numerical simulation were not fairly well agree with experimental measurements. This shows the shallow water equation solver has a limitation which does not exactly reproduce the energy dissipation from the hydraulic jump. Further study might be required, considering the energy dissipation due to the hydraulic jump or transition flow from reflective wave.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.316-322
• /
• 2007

정유압 방식 EHA는 종래의 밸브 제어 방식 전기유압 구동장치와 전혀 다른 특성을 나타낸다. 본 논문에서는 EHA의 비선형 요소를 포함한 수학적 모델을 유도하고 실험적으로 검증하였다. 이 수학적 모델을 근거로 전기 모터로 구동되는 유압 펌프, 파이프 배관 그리고 유압 실린더로 구성되는 EHA의 시물레이션 모델을 개발하여 주요 설계 인자인 모터 토크의 피크치, 펌프의 관성 모멘트 등이 제어 성능에 미치는 영향을 분석하였다. 여기에서 실험 조건은 의도적으로 과도기에서 모터 토크가 포화되도록 선정하였다. 그 결과로서 최대 속도로 동작하는 EHA의 제어 정밀도를 개선하기 위한 설계 조건을 조사하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.348-351
• /
• 2005

In this study, solute breakthrough curves through the unsaturated zone were predicted using artificial neural network (ANN) by numerical tests and laboratory experiments. In the numerical tests, applicability of ANN model to prediction of breakthrough curves was evaluated using synthetic data generated by HYDRUS-2D. An appropriate strategy of ANN application and input data form were recommended. The ANN model was validated by laboratory experiments comparing with HYDRUS-2D simulations. The results show that the ANN model can be an effective method for forecasting solute breakthrough curves through the unsaturated zone when hydraulic data are available.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1999-2004
• /
• 2004

Experiments were conducted to investigate the flow characteristics of water through rectangular PDMS microchannels with a hydraulic diameter ranging from 66.67 to 200 ${\mu}m$. In the experiments, the flow rate and pressure drop across the microchannels were measured at steady states. The experimental results were compared with the predictions from the conventional laminar flow theory. A significant difference between the experimental data and the theoretical predictions was found. Experimental results indicate that the pressure gradient and flow friction in microchannels are higher than those from the conventional laminar flow theory. This may be attributed to the fact that there exists effect of surface roughness of the microchannels. In this study, a surface roughness model is implemented to interpret the experimental data. A good agreement between the experimental data and the numerical predictions with a surface roughness model were found.

• 한국수자원학회논문집
• /
• 제37권8호
• /
• pp.623-630
• /
• 2004

본 논문에서는 수리모형 실험을 통하여 지류와 본류의 합류점의 접근각도, 본류의 유량 및 본류와 지류의 유량비 변화에 따른 합류부의 수리학적 특성을 파악하였다. 실험은 수로길이 450cm의 수로에서 실시하였으며, 본류와 지류의 수로폭은 각각 40cm와 32cm이었으며, 4조의 물탱크와 펌프가 설치되었다. 합류점 부근의 정체 구간의 길이는 접근각도가 증가함에 따라 증가되며, 본류의 유량과 지류와 본류와의 유량비가 증가되는 경우에도 이 경향은 동일하다. 그러나 동일한 합류점 접근각도와 유량비에 있어서 본류 유량 변화에 따른 합류점 부근의 정체구간 변화는 매우 적게 나타나고 있다. 또한 본류와 지류의 유량비가 증가할수록 유속의 정체 구간의 길이가 커져, 유사의 퇴적증가를 유도하는 주요원인이 된다. 합류점 부근의 가속유로는 접근각도가 작을수록 수로 내 중앙부에 한정되지만, 접근각도가 증가할수록 영향권이 증가된다.

• Environmental Engineering Research
• /
• 제22권2호
• /
• pp.203-209
• /
• 2017

Innovations in the biofiltration process can provide effective solutions to overcome crucial water pollution problems. The elimination of pollutants is a result of the combined effects of biological oxidation, adsorption and filtration processes. This research aims to evaluate the performance of quartz sand biofiltration for removing total suspended solids, turbidity, color, organic matter, and ammonium from polluted river water and develop an empirical model for designing quartz sand biofilters for the treatment of polluted river water. Experiments were conducted using two biofilter units filled with quartz sand as filter media. A set of experiments were performed to evaluate the effect of hydraulic retention time on biofilter performance in removing water contaminants. The kinetics of organic matter removal were also determined to describe the performance of the biofilter. The results show that biofiltration can significantly remove river water pollutants. Removal efficiency depends on the applied hydraulic retention time. At a hydraulic retention time of two hours, removal efficiencies of total organics, ammonium and total suspended solids were up to 78%, 82%, and 91%, respectively. A model for designing quartz sand biofiltration has been developed from the experimental data.

• 물과 미래
• /
• 제28권1호
• /
• pp.107-120
• /
• 1995

본 연구는 네팔의 Modi Khola 강 유역에 건설되는 Modi Khola 수력발전소의 취수구 구조물 및 침사지 구조물에 대한 수리모형실험 연구이다. 취수구 구조물은 축척이 1:20인 정상모형으로, 침사지 구조물은 수직방향 축척이 1:10, 수평방향 축척이 1:15인 왜곡모형으로 제작되었다. 본 실험에서는 이동상 모형이론에 의해 'Anthracite'($\rho_s$ =1.48)를 모형사로 선택하였다. 실험결과 취수구 구조물 부분에서는 세사영역의 유사퇴적을 막기 위해 적정한 높이의 guide wall 설치가 바람직하며, 효율적 배사를 위해 배사수문의 적절한 조작이 필요한 것으로 나타났다. 침사지 구조물 부분에서는 효율적인 침사를 위해 침사지내의 난류호흡을 억제시키는 설계가 요구되었고, 침사지내 퇴사를 처리하기 위하여 설치된 유출구측의 배사 파이프는 침사지 전영역의 배사를 효율적으로 수행하지 못하였으므로 최대 퇴사가 발생하는 지점 근처에 추가로 배사 파이프를 설치하는 것이 바람직하다. 또한 침사효율은 평균 약 95%로 관측되었는데, 비교적 좋은 침사지 설계라 판단된다.