• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.183-190
• /
• 2000

Effective range of Hydraulic Hammer Compaction was studied by numerical analysis instead of empirical method. Numerical analyses were carried out with commercial FEM code, ABAQUS, and verified by comparing the numerical results with field tests of Hydraulic Hammer Compaction. Most of material properties were evaluated by data from laboratory and in-situ tests. Vertical effective range was estimated by distribution curve of plastic strain energy dissipated through soil layers under dynamic load and these results were in good agreement with field tests. Based on verification, the effects of governing properties of Hydraulic Hammer Compaction such as number of hit can be determined by numerical analyses. In addition, vertical effective range can also be determined by Menard's empirical equation using the external work at converging time of plastic strain energy in numerical analysis. This implies that the minimum energy of Hydraulic Hammer Compaction for improvement can be determined by Menard's equation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.910-921
• /
• 2004

In this study, the pilot tests on the reclaimed land were performed in order to find the suitable construction method with dynamic compaction Type I, Type II at different dynamic energy and hydraulic hammer compaction. The estimation of the compaction through the various pilot tests was performed by the CPT-qc, SPT-N and field density tests. As the result of the pilot tests, it shows that the dynamic compaction method is better than the hydraulic hammer compaction method in the effect of the ground improvement, especially dynamic compaction Type I is much superior to others. When it comes to method for measuring the intensity of the ground, the value of the cone penetration test-resistance(qc) is much suitable for the ground. Besides, the standards for the compaction control, which showed that over 10Mpa at 0 through 5meters in the upper layer and 7Mpa at 5 through 8meters in the lower layer in the CPT-qc, could be found without discrimination of the upper road and lower road on the reclaimed land. And it also found that the intensity of the reclaimed land gets back to the original status in about 10 through 15 days.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.235-247
• /
• 1998

The IIA(Inchon International Airport) which will function as the HUB airport in the northeast Asian region in the upcoming 21th century will be located in the reclaimed land with sand dredged in the vicinity of project area between Youngjong and Yongyu islands. The original ground is composed of soft clayey silt (ML) or silty clay (CL). The reclaimed land is classified as being SP-SM and having poor gradation of Cu<3 which resulted in the anticipation for difficulty in compaction (compaction index = 0.6~0.7). This anticipation shedded light on the necessity of performing test compactions for the thickness of 3~5meters of reclaimed land, aiming at the discovery of effective and economical compaction method. Upon the call for the test compaction performance 4 different compaction methods have been selected for trial from the research done on the international and local academic papers, past experience with compaction works, and their written materials. For the precise interparetation of test results, the ground survey and measurements have been performed. The Hydraulic Hammer Compaction has been chosen as the most optimum in accordance withe the test results.