• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.198-204
• /
• 2019

For the removal of carbon dioxide from the chemical process, a chemical absorption method is typically used industrially. Development of new processes for the removal of carbon dioxide by the chemical absorption method has been developing new absorbents by using various absorbents. Thermodynamic data of the sorbent mixture in the new process design using hybrid absorbent is essential to reduce the equipment cost and operating costs of the process. In this study, densities of water+diisopropanolamine (DIPA), DIPA+MDEA(Methyldiethanolamine) binary systems and Water+DIPA+MDEA ternary system were measured over the full range of composition at temperatures from 303.15 K to 333.15 K by using an Anton Paar digital vibrating tube densimeter (DMA4500). The experimental excess volumes have been obtained from the experimental density results and have been fitted using the Redlich-Kister-Muggianu expression. The parameters obtained from the binary excess volume data were used for the correlation of ternary system with one additional ternary parameter for each isotherm. All investigated binary and ternary systems are completely miscible, because the values of excess volume are negative under the examined conditions.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.27-36
• /
• 2018

Recently, the demand for new cultivar of oriental mustard(Brassica juncea) is increased as the consumption of oriental mustard has increased dramatically in the market due to Kimchi is attracting the world's attention. However, absence of seed supply system can cause many problems including inbreeding depression due to self seed production, deterioration of the seed purity and heterogeneity of commercial seed. To establish the $F_1$ variety breeding system of oriental mustard, pure line and inbred lines were screened from inbreeding genetic resources. Male-sterile line was also selected from breeding combinations for the quality improvement of mustard. The combining ability from(Indojasai ${\times}$ Goheungdamyang) combinations and isolation line of(MS910 ${\times}$ Japan red mustard 8 ${\times}$ Ganghwa mustard 9) was highest, thus these lines were selected as parental lines. PCR(Polymerase Chain Reaction) and gene sequence analysis revealed that the genes related to CMS(orf263, orf220, and orf288) were distributed in mitochondria. The isolated lines from this study also showed good performance in yield test and farmhouse prove test.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1187-1195
• /
• 2018

Objective: To compare correlations between pulmonary function test (PFT) results and different reconstruction algorithms and to suggest the optimal reconstruction protocol for computed tomography (CT) quantification of low lung attenuation areas and airways in healthy individuals. Materials and Methods: A total of 259 subjects with normal PFT and chest CT results were included. CT scans were reconstructed using filtered back projection, hybrid-iterative reconstruction, and model-based IR (MIR). For quantitative analysis, the emphysema index (EI) and wall area percentage (WA%) were determined. Subgroup analysis according to smoking history was also performed. Results: The EIs of all the reconstruction algorithms correlated significantly with the forced expiratory volume in one second (FEV1)/forced vital capacity (FVC) (all p < 0.001). The EI of MIR showed the strongest correlation with FEV1/FVC (r = -0.437). WA% showed a significant correlation with FEV1 in all the reconstruction algorithms (all p < 0.05) correlated significantly with FEV1/FVC for MIR only (p < 0.001). The WA% of MIR showed the strongest correlations with FEV1 (r = -0.205) and FEV1/FVC (r = -0.250). In subgroup analysis, the EI of MIR had the strongest correlation with PFT in both eversmoker and never-smoker subgroups, although there was no significant difference in the EI between the reconstruction algorithms. WA% of MIR showed a significantly thinner airway thickness than the other algorithms ($49.7{\pm}7.6$ in ever-smokers and $49.5{\pm}7.5$ in never-smokers, all p < 0.001), and also showed the strongest correlation with PFT in both ever-smoker and never-smoker subgroups. Conclusion: CT quantification of low lung attenuation areas and airways by means of MIR showed the strongest correlation with PFT results among the algorithms used, in normal subjects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.173-184
• /
• 2018

As the portable traffic information collection system using probe vehicles spreads, it is becoming possible to collect road hazard information such as portholes, falling objects, and road surface freezing using in-vehicle sensors in addition to existing traffic information. In this study, we developed a integration and decision algorithm that integrates time and space in real time when multiple probe vehicles detect events such as road hazard information based on GPS coordinates. The core function of the algorithm is to determine whether the road hazard information generated at a specific point is the same point from the result of detecting multiple GPS probes with different GPS coordinates, Generating the data, (3) continuously determining whether the generated event data is valid, and (4) ending the event when the road hazard situation ends. For this purpose, the road risk information collected by the probe vehicle was processed in real time to achieve the conditional probability, and the validity of the event was verified by continuously updating the road risk information collected by the probe vehicle. It is considered that the developed hybrid processing algorithm can be applied to probe-based traffic information collection and event information processing such as C-ITS and autonomous driving car in the future.

• The Korean Journal of Mycology
• /
• v.47 no.2
• /
• pp.173-179
• /
• 2019

Sawdust cultivation of Lentinula edodes has been increasing in Korea. Fourteen strains were used to develop the best varieties of L. edodes, and hybridization was carried out by monohybrid cross. The number of hybridized strains was 1,638 among 3,100 combinations. They were cultivated on sawdust medium, and fruiting bodies were formed in 364 strains. Among them, 65 strains were selected as superior candidate strains based on the shape and size of the fruiting bodies. Forty strains formed fruiting bodies without lamellae structure. The shape of the stipe was cylindrical (255 strains), thick to lower part (15 strains), and thick to upper part (94 strains). By the combinations of 2462 n1-10 and 3420 n1-10, 2462 n1, 2462 n2, 2462 n10, and 3420 n3 were selected as excellent monokaryotic strains. These strains were considered to be superior monokaryotic strains that could be used for hybrid breeding.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.154-158
• /
• 2019

BACKGROUND: 'Shiranuhi' mandarin is a major cultivar among all late ripening type of citrus, and is widely cultivated in Korea. However, many farmers have reported scion root problems in their orchard resulting in reduced flowering and fruiting. It is necessary that the physiology of scion-rooted 'Shiranuhi' mandarin trees is further understood. METHODS AND RESULTS: This experiment was conducted to understand the growth response and physiology of scion-rooted 'Shiranuhi' mandarin hybrids. In our study, 'Shiranuhi' mandarin trees were divided into two groups: trees without scion roots (control) and trees with scion roots. The experiment was conducted in Seogwipo of Jeju, with ten replicates for each group. Growth of trees with scion roots was more vigorous and the trees were taller than the controls. Tree height and trunk diameter of scion-rooted trees were significantly higher than those of control trees. Exposed length of rootstocks of scion-rooted trees was significantly lower (by about 2 cm) than that of control trees (8.6 cm). In terms of root nutrition, carbon contents of scion-rooted trees was significantly lower than that of control trees, but nitrogen and potassium concentrations in scion roots were significantly higher than those in control roots. CONCLUSION: Based on the results, we infer that growth of scion-rooted trees was very vigorous and the content of nitrogen in these roots was higher than that in the control tree roots. Thus, the carbon/nitrogen ratio of scion roots was significantly lower than that of the control roots.

• Phonetics and Speech Sciences
• /
• v.11 no.1
• /
• pp.41-49
• /
• 2019

An end-to-end speech recognition model consisting of a single integrated neural network model was recently proposed. The end-to-end model does not need several training steps, and its structure is easy to understand. However, it is difficult to understand how the model recognizes speech internally. In this paper, we visualized and analyzed the attention-based end-to-end model to elucidate its internal mechanisms. We compared the acoustic model of the BLSTM-HMM hybrid model with the encoder of the end-to-end model, and visualized them using t-SNE to examine the difference between neural network layers. As a result, we were able to delineate the difference between the acoustic model and the end-to-end model encoder. Additionally, we analyzed the decoder of the end-to-end model from a language model perspective. Finally, we found that improving end-to-end model decoder is necessary to yield higher performance.

• Composites Research
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

The reinforcement effect of micro-bolt for a bonded scarf joint was investigated. Three scarf ratios of 1/10, 1/20, and 1/30 were considered to examine the effect of scarf patch configuration on joint strength. To maintain the same density of micro-bolt, 16, 32, and 48 bolts were installed in the scarf joint specimens with scarf ratios of 1/10, 1/20, and 1/30, respectively. Tests were also carried out on the joints that are bonded with only adhesive and that are fastened with only micro-bolts to obtain reference values. The average failure loads of the adhesive joints with scarf ratios of 1/10, 1/20, and 1/30 were 29.7, 39.6, and 44.8 kN, respectively. In case of micro-bolt reinforcement, the failure loads at the same scarf ratios were 28.4, 37.2, and 40.1 kN, respectively, which corresponds to 96, 94, and 90% of the pure adhesive joint failure loads. In the case of using only micro-bolts, the failure loads were only 13-25% of the average failure loads of pure adhesive joints. Fatigue test was also conducted for the joints with scarf ratio of 1/10. The results show that the fatigue strength of hybrid joints using both adhesive and microbolts together slightly increased compared to the fatigue strength of adhesive joint, but the rate of increase was small to 2-3%. Through this study, it was confirmed that the reinforcement effect of micro-bolt is negligible in the scarf joints where shear stress is dominating the failure, unlike in the structure where peel stress is dominant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.805-813
• /
• 2018

The research was conducted with the purpose of providing effective safety and quality control system for assistive products for handicapped those are used extensively. Assistive products couldn't be classified independently due to collision with the act of medical device and lack in legal basis. The issues about safety and quality have been solved by other legal frames on a case by case basis. We couldn't find any abroad case of independent safety and quality control policy. For the practical solution, this article suggested hybrid classification system mixed with existing policies. Each classified branches are allocated to the appropriate policy of safety and quality control so those are ease of understanding and prospect. And also a delicacy process was suggested not to leave off any assistive products. Through these suggests of the improvement it is expected that blind areas of safety and quality control for assistive products for handicapped could be solved and identity of assistive products could be established to provide product safety for handicapped and boost relevant industries.

• Journal of Life Science
• /
• v.29 no.2
• /
• pp.272-278
• /
• 2019

The silkworm performs sexual reproduction for the production of its healthy offsprings from generations to generations. Parthenogenesis in the silkworm, Bombyx mori acquires immense use in the development of outstanding homozygouse lines with higher viability, hybrid vigour, combining ability and less phenotypic variability, and it can serve as a powerful tool in controlling sex of the offsprings as well as a useful tool in selection of breeding schemes. However, naturally occuring parthenogenesis in silkworm could not be found so far. Fortunately, artificial induction of parthenogenesis is possible in silkworm. So, it is very important to find out novel methods for induction of parthenogenesis. We investigated to attempt to get a novel parthenogenetic method. Accordingly, parthenogenetic studies on between unfertilized in vivo ovarian eggs of live silkworm moth(novel) and unfertilized in vitro ovarian eggs(conventional) taken out from live silkworm moth were investigated by hot water ($46^{\circ}C$), hot air ($46^{\circ}C$) and low temperature ($0^{\circ}C$ and $-20^{\circ}C$) treatments. The best ratio of parthenogenetic eggs was obtained with in vivo ovarian eggs of live silkworm moth rather than with in vitro ovarian eggs taken out from live silkworm moth in all the treatments. The optimum exposure time absolutely depended upon the temperatures of treatments and the forms of in vivo or in vitro ovarian eggs. From these results, we expect that in vivo artificial parthenogenetic treatments on live silkworm moth will be useful for the higher induction of parthenogenesis in the silkworm, B. mori.