• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2012년도 춘계 종합학술대회 논문집
• /
• pp.175-176
• /
• 2012

세포선별검사에서 ASCUS로 진단된 검체 중 F-UP이 진행되지 않은 검체 179건을 대상으로 HPV High risk factor, Low risk factor를 확인하기 위해서 Hybrid Capture II Test를 하였다. 결과 High risk factor 양성 및 Low risk factor 양성은 전체 179 cases 중 25 cases로 나타났으며, 전체 검체 중 약 15%에 해당되었다. 또한 전체 15%의 양성검체 중 High risk factor 양성은 87%에 해당되는 것을 확인하였다. 결론적으로 효과적인 검진 체계를 갖춘 나라에서도 자궁경부암의 예방이 완전히 해결되지 않고 있는 문제점이 있는 여건을 고려해 볼 때 추적 관찰이 용이하지 않은 경우를 대비해 자궁경부암으로 진행될 수 있는 precancerous lesion의 원인 인자인 HPV 존재 유무를 세포선별검사와 HPV Hybrid Capture II Test를 동시에 시행하는 것이 효과적이라고 사료된다.

• 대한산업공학회지
• /
• 제35권4호
• /
• pp.257-265
• /
• 2009

This paper considers the hybrid flow shop scheduling problem for the objective of minimizing the number of tardy jobs. In hybrid flow shops, each job is processed through multiple production stages in series, each of which has multiple identical parallel machines. The problem is to determine the allocation of jobs to the parallel machines at each stage as well as the sequence of the jobs assigned to each machine. Due to the complexity of the problem, we suggest search heuristics, tabu search and simulated annealing algorithms with a new method to generate neighborhood solutions. In particular, to evaluate and select neighborhood solutions, three surrogate objectives are additionally suggested because not much difference in the number of tardy jobs can be found among the neighborhoods. To test the performances of the surrogate objective based search heuristics, computational experiments were performed on a number of test instances and the results show that the surrogate objective based search heuristics were better than the original ones. Also, they gave the optimal solutions for most small-size test instances.

• 한국지진공학회논문집
• /
• 제26권2호
• /
• pp.83-93
• /
• 2022

In this study, to verify the structural performance of the Composite Joint System (CJS) hybrid structural model, a cyclic load test was performed and evaluated and verified through the test. To verify the structural performance of the CJS hybrid structural systems' joint and evaluate the seismic performance, four three-dimensional real-size specimens were developed with three internal beam-column specimens and one external beam-column specimen. The three interior column specimens were classified by different methods of joining the upper column and lower column, and the same bonding method as the primary specimen was used for the exterior column. The structural performances in terms of drift, strength, and energy dissipation capacity were analyzed and compared based on the experimental results. From the displacement-based loading experiment, all specimens showed a lateral drift of 4.0% without any significant strength drop and stable energy dissipation capacity.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.340-347
• /
• 2008

Dipstick urinalysis is used as a routine test for a screening test of UTI (urinary tract infection) in primary practice because urine dipstick test is simple. The result of dipstick urinalysis brings medical professionals to make a microscopic examination and urine culture for exact UTI diagnosis, therefore it is emphasized on a role of screening test. The objective of this study was to the classification between UTI patients and normal subjects using hybrid neural network classifier with enhanced clustering performance in urine dipstick screening test. In order to propose a classifier, we made a hybrid neural network which combines with RBF layer, summation & normalization layer and L VQ artificial neural network layer. For the demonstration of proposed hybrid neural network, we compared proposed classifier with various artificial neural networks such as back-propagation, RBFNN and PNN method. As a result, classification performance of proposed classifier was able to classify 95.81% of the normal subjects and 83.87% of the UTI patients, total average 90.72% according to validation dataset. The proposed classifier confirms better performance than other classifiers. Therefore the application of such a proposed classifier expect to utilize telemedicine to classify between UTI patients and normal subjects in the future.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.67-79
• /
• 2001

본 연구는 최근 개발된 마이크로 복합실리카 그라우트재의 공학적 특성을 규명한 것으로서 연구에 사용된 그라우트재는 MSG-N(완결형)을 주로 사용하였으며, 화학성분, 입도분포, 광물특성을 분석하고 응결재인 특수규산과 보통시멘트에 대한 특성도 비교 분석하였다. 공학적 특성을 파악하기 위하여 블리딩시험, 전도시험, 응결시험, 육안관측, SEM촬영, 일축압축강도시험과 매립지에 대한 현장적용성 시험 등을 심사하였다. 이상과 같은 일련의 시험들에 의한 결과 일반적인 소디움 실리케이트 그라우트보다 마이크로 복합실리카 그라우트 공법(MSG공법)이 강도적인 측면에서는 2배정도 우수하고, 알카리 용출량이 현저하게 저하되었다. 특히 MSG공법에 의한 현장적용성 평가에 있어서 매립장 침출수 차단공법으로써 침투성이 우수하고 충분한 약액의 주입에 의해 상당한 투수계수 저감효과가 있음을 알 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.65-72
• /
• 2018

PURPOSE. The aim of this in vitro study was to investigate the fracture resistance under chewing simulation of implant-supported posterior restorations (crowns cemented to hybrid-abutments) made of different all-ceramic materials. MATERIALS AND METHODS. Monolithic zirconia (MZr) and monolithic lithium disilicate (MLD) crowns for mandibular first molar were fabricated using computer-aided design/computer-aided manufacturing technology and then cemented to zirconia hybrid-abutments (Ti-based). Each group was divided into two subgroups (n=10): (A) control group, crowns were subjected to single load to fracture; (B) test group, crowns underwent chewing simulation using multiple loads for 1.2 million cycles at 1.2 Hz with simultaneous thermocycling between $5^{\circ}C$ and $55^{\circ}C$. Data was statistically analyzed with one-way ANOVA and a Post-Hoc test. RESULTS. All tested crowns survived chewing simulation resulting in 100% survival rate. However, wear facets were observed on all the crowns at the occlusal contact point. Fracture load of monolithic lithium disilicate crowns was statistically significantly lower than that of monolithic zirconia crowns. Also, fracture load was significantly reduced in both of the all-ceramic materials after exposure to chewing simulation and thermocycling. Crowns of all test groups exhibited cohesive fracture within the monolithic crown structure only, and no abutment fractures or screw loosening were observed. CONCLUSION. When supported by implants, monolithic zirconia restorations cemented to hybrid abutments withstand masticatory forces. Also, fatigue loading accompanied by simultaneous thermocycling significantly reduces the strength of both of the all-ceramic materials. Moreover, further research is needed to define potentials, limits, and long-term serviceability of the materials and hybrid abutments.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.79-85
• /
• 2017

This paper summarizes the experimental study of the shear behaviour of Hybrid Fibre Reinforced Concrete (HFRC) beams retrofitted by using externally bonded Glass Fibre Reinforced Polymer (GFRP) laminates. To attain the set-out objectives of the present investigation, steel fibre of 1% and polypropylene fibre of 0.30% was used for hybrid steel-polypropylene fibre reinforced concrete: whereas for hybrid glass-polypropylene fibre reinforced concrete, glass fibre by 0.03% and polypropylene fibre of 0.03% by volume of concrete was used. In this study, 9 numbers of beams were cast and tested into three groups (Group I, II & III). Each group containing 3 numbers of beams, out of which one serve as a control beam or a hybrid steel-polypropylene fibre reinforced concrete beam or a hybrid glass - polypropylene fibre reinforced concrete beam and the remaining two beams were preloaded until shear cracks appeared up to 75% of ultimate load and then preloaded beams (damaged beams) were retrofitted with GFRP laminates at shear zone in the form of strips, as one beam in vertical position and another beam in inclined position to restrict the shear cracks. Finally, the retrofitted beams were loaded until failure and test results were compared. The experimental tests have been conducted to investigate various parameters of structural performance, such as load carrying capacity, crack pattern and failure modes, load-deflection responses and ductility relations. The test results revealed that beams retrofitted using GFRP laminates considerably increased the load carrying capacity. In addition, it was found that beams retrofitted with inclined strip offers superior performance than vertical one. Comparing the test results, it was observed that hybrid steel-polypropylene fibre reinforced concrete beam retrofitted with GFRP laminates showed enhanced behaviour as compared to other tested beams.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.647-657
• /
• 2009

본 연구는 강-프리스트레스 콘크리트(PSC) 혼합구조 보를 분절형 교량에 적용하기 위해 필수적으로 요구되는 이종 부재간의 연결에 대한 기초연구로써, 연결부 거동과 시공성을 향상시키기 위해 연결부 상․하부 플레이트에 perfobond rib 전단연결재를 설치한 강-PSC 연결부를 제안하였다. 제안된 연결부가 설치된 보 실험체들을 제작하여 하중재하실험을 통해 연결부의 성능을 확인한 결과, 모든 실험체에서 연결부의 파괴 없이 연결부 인접 PSC부에서 실험체의 파괴와 극한강도가 나타났다. 합성 작용에 의하여 실험체의 초기 강성은 우수한 것으로 나타났으며, 균열의 진전 형상도 전형적인 휨 균열 형상을 나타내었다. 또한, 기존 스터드를 적용한 실험체 이상의 강도를 얻을 수 있는 것으로 나타났다. 그러므로 제안된 연결부는 혼합구조 연결부에 효과적으로 적용 가능하다고 판단된다.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1407-1413
• /
• 2013

하이브리드 굴삭기는 기존 굴삭기와 달리 선회구동계에 유압모터를 대신하여 선회전동기를 사용하고 있다. 하이브리드 굴삭기의 신뢰성을 평가하고 보증하기 위해서는 기계와 전기적인 고장모드가 조합되어 고려되어야 한다. 특히, 하이브리드 굴삭기용 선회감속기는 가혹한 실외환경에서 운용되므로 시작품에 대한 현장작동조건을 고려한 가속수명시험이 수행되어야 한다. 본 연구에서는 선회구동계 중선회감속기에 대한 가속수명시험 기법의 개발을 위하여 FMMA, FMAECA, FTA 및 QFD와 같은 정성적 신뢰성기법을 활용하였고, 개발된 가속조건에 의한 수명시험결과를 유분석 기법 등을 활용 분석하여 평가대상 시료가 목표 신뢰도를 만족함을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제20권3호
• /
• pp.31-38
• /
• 2019

PCFT말뚝의 하부에 PHC말뚝을 연결한 PCFT 복합말뚝에 대한 최적의 동재하시험 분석 방법을 도출하기 위하여 동일 현장에 시공된 강관 복합말뚝과 PCFT 복합말뚝에 대해 동재하시험을 실시한 후 CAPWAP분석 결과를 비교하였다. 그 결과 PCFT 복합말뚝에 대한 동재하시험 수행 시 변형률계와 가속도계는 상부 PCFT말뚝에서 강관을 제거한 후 내부 합성 PHC말뚝에 부착하는 것이 바람직하고, 이렇게 측정된 PCFT 복합말뚝의 입자 변위속도는 PHC말뚝 고유의 변형파 속도인 4,000m/sec과 동일하였다. 그리고 CAPWAP분석 시 PM과정을 통해 상부 PCFT말뚝의 재질을 PHC말뚝과 동일하게 하고 말뚝 단면적으로 콘크리트로 환산한 단면적을 사용했을 때 CAPWAP분석의 정확도가 가장 높은 것으로 나타났다.