• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5438-5442
• /
• 2011

In order to use as weight-reduced sintered parts for automobiles, mechanical properties of sintered compacts of 2712 Al-alloys containing 0, 10, 20, and 33% ceramics, respectively, were investigated in this study. (1)Regardless of ceramic contents, all sintered compacts possessed 4~7% pores. (2)After aging the compacts sintered for 12 minutes, tensile strength of the 2712 Al-alloys containing 0, 10, 20, and 33% ceramics was 165, 260, 256, and 166 N/$mm^2$, respectively, whereas those aged after sintering for 30 minutes exhibited the tensile strength of 186, 229, 219, and 202 N/$mm^2$, respectively. In addition, the 2712 sintered compact containing 10% ceramics showed the maximum elongation of about 3.6%, (3)After aging the 10% ceramic-containing sintered compacts reached a maximum apparent hardness ($H_RF$) of 97. (4)The minimum wear volume ($174{\times}10^{-3}mm^3$) was shown in the 10% ceramic-containing 2712 sintered compact after aging. From these results, the 2712 sintered compact containing 10% ceramics thought to be the most suitable one for the fabrication of aluminum engine part.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.74-79
• /
• 2019

The military vehicle produces electric power through an engine-integrated serial hybrid generator that is connected to the engine and does not have a separate generator installation space. However, depending on the mechanical characteristics of the connection between the generator and the engine, iron oxide for internal rusting and lubrication grew scattered. The iron oxide is adhered to the starter to deteriorate the starting performance, and there is a problem that the noise of the leg due to wear of the gear is increased. To solve this problem, the connection spline material and the surface treatment of the engine were improved and the shape was changed to a grease sealing type to prevent the generation of iron oxide inside. As the shape of the generator connector composing the shafting system was changed, the integrity of the structure was confirmed through the torsional endurance test. In addition, through the actual vehicle load test, it was verified that no corrosion occurred during the target life span without internal corrosion. It was confirmed that the anti-scattering structure of the grease effectively suppresses the generation of iron oxide, thereby reducing the noise generated from the generator. In this paper, we propose a fundamental solution to the degradation of the starter and the noise generation by preventing the back corrosion caused by the serial hybrid generator installed between the engine and the transmission.

• Journal of Life Science
• /
• v.29 no.7
• /
• pp.755-761
• /
• 2019

Kojic acid (KA) is produced by Aspergillus oryzae-sort of like mushrooms, which is commonly called as koji in Japan. KA is used as a chelation agent and a preservative preventing oxidative browning of fruits. KA also shows antibacterial and antifungal properties. Because KA stops the production of melanin by inhibiting tyrosinase in the biosynthetic pathway from tyrosine to melanin in skin, it has been applied as a skin lightening ingredient in cosmetics. Since some animal studies have shown that high amounts of KA had side effects such as in liver, kidney, reproductive, cardiovascular, gastrointestinal, respiratory, brain, and nervous system, more efficient KA derivatives are needed to be developed in order to safely apply as a skin lightening ingredient. A series of KA derivatives via conjugated with triazole by click reaction were synthesized and their in vitro tyrosinase inhibitory activities were evaluated. Most of all KA derivatives have shown in moderate tyrosinase inhibitory activities. In case of KA-hybrid compound, 1~3 have shown tyrosinase inhibitory activities about 50~10,000 times more effective tyrosinase inhibitor compared to KA itself. Specifically, the $IC_{50}$ value of KA-hybrid compound, 2 was $0.0044{\pm}0.74{\mu}M$ against tyrosinase. It is about 10,000 times more effective tyrosinase inhibitor compared to KA itself ($IC_{50}=45.2{\pm}4.6{\mu}M$).

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.5-16
• /
• 2009

The is study is to evaluate the small strain shear modulus ($G_{max}$) of Busan clay using in-situ penetration tests. A series of dilatometer tests (DMT) and piezocone penetration tests (CPTu) are performed at Busan newport and Noksan sites, and hybrid oedometer tests are also carried out on the specimens obtained from both sites. The $G_{max}$ is evaluated from the shear wave velocity ($V_s$) measured by the bender elements installed at the boundary of oedometer cell. By analyzing these data, the relationship of $G_{max}$ and state variables, such as confined stress and void ratio, is developed. The analysis of lab and in-situ test results reveals that the ratio of $G_{max}$ to $q_t$ is inversely proportional to the plasticity index while the ratio of $G_{max}$ to $E_D$ has a linear relationship with ($I/I_D$)$(p_a/{\sigma}'_v)^{0.5}$. Two correlations suggested in this study, based on CPT and DMT results, appear to provide reasonable predictions of the small strain shear modulus.

• Composites Research
• /
• v.19 no.1
• /
• pp.29-35
• /
• 2006

The avoidance of enemy's radar detection is very important issue in the modem electronic weapon system. Researchers have studied to minimize reflected signals of radar. In this research, two types of radar absorbing structure (RAS), 'C'-type shell and 'U'-type shell, were fabricated using fiber-reinforced composite materials and their radar cross section (RCS) were evaluated. The absorption layer was composed of glass fiber reinforced epoxy and nano size carbon-black, and the reflection layer was fabricated with carbon fiber reinforced epoxy. During their manufacturing process, undesired thermal deformation (so called spring-back) was observed. In order to reduce spring-back, the bending angle of mold was controlled by a series of experiments. The spring-back of parts fabricated by using compensated mold was predicted by finite element analysis (ANSYS). The RCS of RAS shells were measured by compact range and predicted by physical optics method. The measured RCS data was well matched with the predicted data.

• Journal of Technology Innovation
• /
• v.23 no.2
• /
• pp.33-54
• /
• 2015

Supercomputing performance demand forecasting at the national level is an important information to the researchers in fields of the computational science field, the specialized agencies which establish and operate R&D infrastructure, and the government agencies which establish science and technology infrastructure. This study derived the factors affecting the scientific and technological capability through the analysis of supercomputing performance prediction research, and it proposed a hybrid forecasting model of applying the super-computer technology trends. In the cross-sectional analysis, multiple regression analysis was performed using factors with GDP, GERD, the number of researchers, and the number of SCI papers that could affect the supercomputing performance. In addition, the supercomputing performance was predicted by multiplying in the cross-section analysis with technical progress rate of time period which was calculated by time series analysis using performance(Rmax) of Top500 data. Korea's performance scale of supercomputing in 2016 was predicted using the proposed forecasting model based on data of the top500 supercomputer and supercomputing performance demand in Korea was predicted using a cross-sectional analysis and technical progress rate. The results of this study showed that the supercomputing performance is expected to require 15~30PF when it uses the current trend, and is expected to require 20~40PF when it uses the trend of the targeting national-level. These two results showed significant differences between the forecasting value(9.6PF) of regression analysis and the forecasting value(2.5PF) of cross-sectional analysis.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.1
• /
• pp.7-23
• /
• 2005

Molecular phylogenetic studies were conducted to evaluate interspecific relationships in 40 populations of Viola including 35 Korean taxa, four Japanese populations and one outgroup using nuclear ribosomal ITS sequences. The phylogenetic analyses were conducted using parsimony and neighbor-joining methods. Subsection Trigonocarpae of section Nomimium appeared as the most basal clade within the Korean Viola. Section Dischidium and Chamaemelanium was monophyletidbootstrap 100%) and placed between subsect. Trigonocarpae and three other subsections of sect. Nomimium. Sect. Nomimium was paraphyletic. Although each subsectional grouping was in accordance with previous infrageneric classification based on morphological characters, yet discordance remained at the series level. Two evolutionary trends observed in the ITS tree were as follows. First, subsect. Trigonocarpae(x=10) was derived from the outgroup(x=6); Second, subsects. Bilobatae and Vaginatae(x=10 or 12), and subsect. Patellares(x=12) of sect. Nomimium were originated from sects. Dischidium and Chamaemelanium(x=6). Viola albida complex including three very closely related taxa was recognized as independent group within subsect. Patellares in parsimony tree. This result suggested that they should be treated as a taxa in series Pinnatae. Phylogenetic position of a putative hybrid species, Viola woosanensis was not supported with previous morphological hypothesis.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.1-28
• /
• 2015

In this paper, the dynamic response of functionally gradient steel (FGS) composite cylindrical panels in steady-state thermal environments subjected to impulsive loads is investigated for the first time. FGSs composed of graded ferritic and austenitic regions together with bainite and martensite intermediate layers are analyzed. Thermo-mechanical material properties of FGS composites are predicted according to the microhardness profile of FGS composites and approximated with appropriate functions. Based on the three-dimensional theory of thermo-elasticity, the governing equations of motionare derived in spatial and time domains. These equations are solved using the hybrid Fourier series expansion-Galerkin finite element method-Newmark approach for simply supported boundary conditions. The present solution is then applied to the thermo-elastic dynamic analysis of cylindrical panels with three different arrangements of material compositions of FGSs including ${\alpha}{\beta}{\gamma}M{\gamma}$, ${\alpha}{\beta}{\gamma}{\beta}{\alpha}$ and ${\gamma}{\beta}{\alpha}{\beta}{\gamma}$ composites. Benchmark results on the displacement and stress time-histories of FGS cylindrical panels in thermal environments under various pulse loads are presented and discussed in detail. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state of the art of this problem, and provide pertinent results that are instrumental in the design of FGS structures under time-dependent mechanical loadings.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.53.2-53.2
• /
• 2010

In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.

• Smart Structures and Systems
• /
• v.21 no.4
• /
• pp.435-448
• /
• 2018

This paper reports the development of a theoretically rigorous method for permanent way engineers to assess the condition of railway ballast under a concrete sleeper with the potential to be extended to a smart system for long-term health monitoring of railway ballast. Owing to the uncertainties induced by the problems of modeling error and measurement noise, the Bayesian approach was followed in the development. After the selection of the most plausible model class for describing the damage status of the rail-sleeper-ballast system, Bayesian model updating is adopted to calculate the posterior PDF of the ballast stiffness at various regions under the sleeper. An obvious drop in ballast stiffness at a region under the sleeper is an evidence of ballast damage. In model updating, the model that can minimize the discrepancy between the measured and model-predicted modal parameters can be considered as the most probable model for calculating the posterior PDF under the Bayesian framework. To address the problems of non-uniqueness and local minima in the model updating process, a two-stage hybrid optimization method was developed. The modified evolutionary algorithm was developed in the first stage to identify the important regions in the parameter space and resulting in a set of initial trials for deterministic optimization to locate all most probable models in the second stage. The proposed methodology was numerically and experimentally verified. Using the identified model, a series of comprehensive numerical case studies was carried out to investigate the effects of data quantity and quality on the results of ballast damage detection. Difficulties to be overcome before the proposed method can be extended to a long-term ballast monitoring system are discussed in the conclusion.