• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.71-72
• /
• 2014

This paper presents a method to find the fault location on the DC cables for the HVDC transmission systems which utilizes a hybrid topology of the diode rectifier and the voltage-source converter (VSC) in the wind farm (WF) side. First, the DC-cable fault occurring in this HVDC system is analyzed in detail. Then, the DC-cable fault location is detected from the two relative voltages located on the same section of the cable, which are estimated from a pair of DC-cable voltage and current measurements. The effectiveness of the method is verified by the simulation results.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.39-48
• /
• 1999

This study was carried out to investigate the difference and genetic similarity at the level of molecular genetics. Genomic DNA was extracted from blood of Holstein, Korean cattle, Charolais, and hybrid between Korean cattle and charolais and RAPD(random amplified polymorphic DNAs) was analyzed by PCR(polymerase chain reaction). After genetic similarity value from different breeds are analyzed, genetic similarity was estimated by UPGMA(unweighted pair-group method using average). The results obtained from this study can be summarized as follows: 1. When genomic DNA which was extracted from different breeds was subjected to electrophoresis on 1.5% agarose gel, bigger than 12.2kb was appeared. Ratio by absorbance of $A_{260}/A_{280}$ was 1.75~2.10, indicating that genomic DNA was quite pure for RAPD analysis. 2. Different band patterns by RAPD were appeared according to the breeds in cattle. The best primer used to distinguish Holstein from other breeds was 5'-GAC CGC TTG T-3'. 3. A 340bp fragment was amplified in $33.0^{\circ}C$ of annealing temperature for the Holstein and Charolais breeds, but any amplification was not occurred in this annealing temperature for Korean cattle and hybrid. In addition, a 340bp fragment was amplified in $37.5^{\circ}C$ of annealing temperature for the Holstein and Korean cattle, but any amplification was not occurred in this annealing temperature for Charolais and hybrid. For the reaction of PCR. $37.5^{\circ}C$ and $33.0^{\circ}C$ of annealing temperature was shown to be best for genetic marker identification from Holstein, Charolais, and hybrid between Korean cattle and Charolais. 4. When genetic similarity from different breeds are analyzed at the both temperature of $33.0^{\circ}C$ and $37.5^{\circ}C$, the genetic similarity value of Holstein and Korean cattle, Holstein and Charolais, Korean cattle and Charolais, and Korean cattle and hybrid were 0.666~0.777, 0.615~0.666, 0.400~0.461 and 0.857~0.888, respectively. 5. It could be concluded that different breeds are capable of distinguishing by RAPD used random primer 5'-GAC CGC TTG T-3', genetic similarity from different breeds was appeared the higher genetic similarity value of Korean cattle and Charolais than that of Holstein between Korean cattle and Charolais by UPGMA.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.525-534
• /
• 2014

Microsatellite markers were used to identify 58 major commercial melon cultivars, and to assess hybrid seed purity of a melon breeding line known as '10H08'. A set of 412 microsatellite primer pairs were utilized for fingerprinting of the melon cultivars. Twenty-nine markers showed hyper-variability and could discriminate all cultivars on the basis of marker genotypes, representing the genetic variation within varietal groups. Cluster analysis based on Jaccard's distance coefficients using the UPGMA algorithm categorized 2 major groups, which were in accordance to morphological traits. The DNA bulks of female and male parents of breeding line '10H08' were tested with 29 primer pairs based on microsatellites to investigate purity testing of $F_1$ hybrid seeds, and 5 primer pairs exhibited polymorphism. One microsatellite primer pair (CMGAN12) produced unambiguous polymorphic bands among the parents. Among 192 seeds tested with CMGAN12, progeny possibly generated by self-pollination of the female parent were clearly distinguished from the hybrid progeny. These markers will be useful for fingerprinting melon cultivars and can help private seed companies to improve melon seed purity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.1
• /
• pp.7-12
• /
• 2010

The full-length cDNA of the porcine peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase (PECI) gene encodes a monofunctional peroxisomal ${\Delta}^3$,${\Delta}^2$-enoyl-CoA isomerase. Cloning and sequencing of the porcine PECI cDNA revealed the presence of an 1185-base pair open reading frame predicted to encode a 394-amino acid protein by the 5'rapid amplification of cDNA ends (5'RACE) and EST sequences. The porcine PECI gene was expressed in seven tissues (heart, liver, spleen, lung, kidney, skeletal muscle, fat) which was revealed by reverse transcriptase-polymerase chain reaction (RT-PCR). The porcine PECI was mapped to SSC71/2 p11-13 using the somatic cell hybrid panel (SCHP) and the radiation hybrid panel (RH) (LOD score 12.84). The data showed that PECI was closely linked to marker S0383. A C/T single nucleotide polymorphism in PECI exon 10 (3'UTR) was detected as a PvuII PCR-RFLP. Association analysis in our experimental pig population showed that different genotypes of PECI gene were significantly associated with the Average Backfat thickness (ABF) (p<0.05) and Buttock backfat thickness (p<0.01).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.68-71
• /
• 2004

본 연구는 싱크로트론 방사광의 단색광 (monobeam)을 이용한 영상을 획득하였다. 영상센서로서 CMOS를 사용하였으며 센서 앞단에는 형광체 (phosphor)를 이용하여 방사광에 대한 빛의 신호로서 영상을 획득하였다. 사용된 싱크로트론 방사광의 beam size는 $5mm{\times}2mm$ 이며 ion chamber를 통한 beam intensity 는 $10{\times}10^{-7}$이다. 형광체는 각각 ZnS(Cu:Al), ZnS(Ag,Al), $BiTiO_3$, $Y_2O_2S(Tb)$로서 4가지를 사용하였으며 여기에 사용된 형광체는 기계식 스크린 프린팅 (Screen Printing) 방식으로 직접 제조하였다. 두께는 모두 동일하게 $10{\mu}m$이며 각각에 대한 PL(Photoluminescence)을 측정하여 분석하였다. object로는 물고기와 20linepair를 사용하였으며 CMOS센서를 이용하여 각각의 phosphor에 대하여 영상을 획득하였다. 영상의 평가는 20line pair 영상의 MTF를 이용하였다. 각각의 형광체에 대한 MTF는 5 lp/mm 에서는 0.5650, 0.2150, 0.7890, 0.3840 이며 10 lp/mm 은 0.4500, 0.0900, 0.2510, 0.1500이고 15 lp/mm 는 0.1900, 0.0300, 0.1430, 0.0500이며 마지막으로 20 lp/mm 은 0.0810, 0.004, 0.0500, 0.0320의 MTF 값을 나타내었다. $10{\mu}m$ 두께에 대하여 ZnS(Cu:Al)이 가장 좋은 MTF의 값을 나타내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.745-751
• /
• 2012

Hybrid rocket shows interesting characteristics of complicated mixing layers developed by interactions between turbulent oxidizer flow and mass flow from surface due to fuel vaporization. In this study, compressible LES with a ring structure attached at the entrance of the combustor are performed. According to one recent report, adding a ring structure in the middle of the combustor helps increasing regression rate. From the numerical results, it is seen that vortex structures near the wall becomes stronger due to the interaction with surface mass injection, and the local heat flux increases due to the vortices. This phenomenon is obviously related to the generation of dimple structures which are seen in the number of experiments. Also, the ring structure at the entrance induces strong vortex flow which enhances heat transfer to the wall surface and mixing between fuel and oxidizer as well as reaction efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.1051-1077
• /
• 2021

The secure communication of information is a major concern over the internet. The information must be protected before transmitting over a communication channel to avoid security violations. In this paper, a new hybrid method called compressed encrypted data embedding (CEDE) is proposed. In CEDE, the secret information is first compressed with Lempel Ziv Welch (LZW) compression algorithm. Then, the compressed secret information is encrypted using the Advanced Encryption Standard (AES) symmetric block cipher. In the last step, the encrypted information is embedded into an image of size 512 × 512 pixels by using image steganography. In the steganographic technique, the compressed and encrypted secret data bits are divided into pairs of two bits and pixels of the cover image are also arranged in four pairs. The four pairs of secret data are compared with the respective four pairs of each cover pixel which leads to sixteen possibilities of matching in between secret data pairs and pairs of cover pixels. The least significant bits (LSBs) of current and imminent pixels are modified according to the matching case number. The proposed technique provides double-folded security and the results show that stego image carries a high capacity of secret data with adequate peak signal to noise ratio (PSNR) and lower mean square error (MSE) when compared with existing methods in the literature.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.137-139
• /
• 2002

본 논문은 FTTC용 공유급전시스템을 구성하기 위한 광동복합케이블 연구에 관련한 것이다. 광섬유 및 구리 도체를 하나의 케이블에 포함한 복합케이블은 공유급전 시스템에서 포설 비용 절감 및 서비스의 운용 및 유지 보수의 효율 향상을 가능하게 한다. KT 운용시스템연구소의 공유급전 시스템 구성에 따라서 세 가지 type의 광동복합 케이블을 설계하였다. 구리 도체로는 200Vdc 출력 전력을 최대 500m까지 급전을 지원하는 0.65mm 직경의 구리 도체가 선정되었으며 KT 규격을 만족하는 일반 단일모드 광섬유가 적용되었다. 케이블 구조는 다심화에 유리하고 중간분기가 용이한 loose tube형 구조를 채택하였으며, 다심 케이블에서는 stranding된 3층의 집합 코아를 가지도록 설계하였다. 다심의 광동복합케이블은 32심 광섬유와 18페어(pair)의 동선을 실장하여, 두 조의 케이블로 32개의 ONU의 광신호전송 및 전력 공급이 가능하도록 하였다. 또한 포설 및 중간 분기 작업시 광섬유로의 접근이 용이하게 하기 위해 광섬유 튜브를 최외층에 배치하였다. 복합케이블은 상용 loose tube형 광케이블과 동일한 공정으로 제작되었으며, 기계적 및 환경적 특성에서 KT 규격을 만족하는 것을 확인하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.5
• /
• pp.7-14
• /
• 1977

Conventionally, a TIVT has been used for high power amplification in the microwave frequency range. However, an ultra-high-power amplifier in the 2GHz range has successfully been designed and fabricated employing high power transistors developed recently and available commercially. In the design of the amplifier, a balanced-pair configuration is adopted in order to obtain very high microwave power, and a good impedance matching is achieved by making use of microstripline techniques. For the RF power divider as well as combiner, an approach of stripline directional coupler isadopted because of its easiness in fabrication. The coupler so designed and fabricated indicates a satisfactory performance as a quadrature hybrie coupler. Measurements on the amplifier developed for an immediate commercial application also exhibit excellent overall performance characteristics RF power output, 14 watts, gain 14dB, frequency bandwidth, 160MHz, effciency 40%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.116-121
• /
• 2012

In recent years, world is faced with a transportation energy dilemma, and the transportation is dependent on a single fuel - petroleum. However, Hybrid Electric Vehicle(HEV) technology holds more advantages to reduce the demand for petroleum in the transportation by efficiency improvements of petroleum consumption. Therefore, there is a trend that lower gear noise levels are demanded in HEV for drivers to avoid annoyance and fatigue during operation. And meshing transmission error(T.E.) is the excitation that leads to the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. This paper presents a method for the analysis of gear tooth profile and lead modification, and the predictions of transmission error and load distribution are shown under one loaded torque for the 1st gear pair of HEV gearbox. The test is also obtained before tooth micro-modification under the torque. At last, the appropriate tooth modification is used to minimize the transmission error and load distribution under the loaded torque. It is a good approach which the simulated result is used to improve the design in order to minimize the radiation gear whine noise.