• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.67-70
• /
• 2003

To develop an effective geometric modeling is essential in order that precise mechanical properties and the geometrical properties of the 3-D braided composites can be estimated. RVE(representative volume element) was adopted fur geometrical modeling. RVE consisted of IC(inner unit cell), ISUC(interior surface unit cell) and ESUC(exterior surface unit cell). The whole geometrical model fur hybrid 3-D braided composites was developed.

• Composites Research
• /
• 제30권5호
• /
• pp.273-279
• /
• 2017

This paper describes the fabrication techniques and analysis of hybrid composite plates with an active frequency selective surface (FSS). For fabricating hybrid composite plate with active FSS, an active FSS with a resonance frequency located in the C band can obtained using varactor diodes. The hybrid composite plate was first designed and simulated to determine its electromagnetic properties using the commercial software HFSS. After simulation, active FSSs and hybrid composite plates were fabricated by mounting with varactor diodes. After fabrication, free space measurement was used to determine the electromagnetic properties of active FSS and the hybrid composite plates. The simulation and experimental results were in good agreement.

• 센서학회지
• /
• 제6권3호
• /
• pp.194-199
• /
• 1997

자기센서가 전압이나 전류의 형태 그대로 출력되는 경우에 발생되는 잡음 유입 및 전압 손실 문제를 개선하기 위하여 소자부는 CMOS공정을 이용하여, 포화영역에서 동작하는 2 drain의 MAGFET을 설계 제작하고, 연산증폭기를 이용한 I-V변환회로, VCO(Voltage Controlled Oscillator)를 만들고 Schmitt trigger에 의한 주파수(Pulse) 변환회로의 시스템부를 하이브릿드 IC로 구성하여 packaging했다. 이 때 자기센서 절대감도는 1.9 V/T, 적감도는 $3.2{\times}10^{4}\;V/A{\cdot}T$ 이었으며 190 kHz/T의 안정된 출력 주파수 특성을 얻을 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1016-1030
• /
• 2018

In this paper, an error-detection-coding-aided iterative hard decision interference cancellation (EDC-IHIC) scheme for multiple-input multiple-output systems employing hybrid automatic repeat request (HARQ) for multi-packet transmission is developed and investigated. In the EDC-IHIC scheme, only packets identified as error-free by the EDC are submitted to the interference cancellation (IC) stage for cancellation from the received signals. Therefore, the possibility of error propagation, including inter-transmission error propagation, can be eliminated using EDC-IHIC. Because EDC must be implemented in systems that employ HARQ to determine packet retransmission, error propagation can be prevented without the need for additional redundancy. The results of simulations conducted herein verify that the EDC-IHIC scheme outperforms conventional hard decision IC schemes in terms of the packet error rate in various environments.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.96-101
• /
• 2000

Sintered alumina ceramic substrate has been used for the insulating substrate for thick Hybrid IC owing to its cheapness and good insulating properties. Some of thick HIC's are important to eliminate the heat emitted from the parts that are mounted on the ceramic substrate. Sintered ceramic substrate can not transfer and emit the heat efficiently. It's been tried to do plasma spray coating of alumina ceramic on the metal substrates that have a good heat emission property. The most important properties to commercialize this ceramic coated metal substrate are surface roughness and deposition efficiency. In this study, plasma spray coating parameters are optimized to minimize the surface roughness and to maximize the deposition efficiency using Taguchi experimental method. By this optimization, the deposition efficiency was greatly improved from 35% at the frist time to 75% finally.

• Mycobiology
• /
• 제39권2호
• /
• pp.137-139
• /
• 2011

A Vitis hybrid-Vitis coignetiae red wine was vinified by fermentation of a mixture of a Vitis hybrid.Vitis coignetiae must with Saccharomyces cerevisiae KCTC 7904 at $25^{\circ}C$ for 10 days. The Vitis hybrid-Vitis coignetiae red wine showed high antihypertensive angiotensin I-converting enzyme (ACE) inhibitory activity (67.8%) and antioxidant activity (76.7%). The antihypertensive ACE inhibitor in the Vitis hybrid-Vitis coignetiae red wine was partially purified by solid phase extraction chromatography, and its ACE inhibitory activity yielded an $IC_{50}$ of 1.8 mg/mL. Six kinds of oligopeptides, including five new kinds, were contained in the partially purified ACE inhibitor fraction from the red wine after 10 days of fermentation. Antioxidant activity decreased significantly from 76.7% to 40.5% when the post-fermentation period was prolonged to 30 days.

• 마이크로전자및패키징학회지
• /
• 제2권2호
• /
• pp.49-56
• /
• 1995

ATM 교환기에 사용되는 하이브리드 IC에 대해 냉각성능과 전자파 차폐성능을 실 험과 수치해석에 의해 분석하였다. 하이브리드 IC 상부에 전자파 차폐를 위해 부착하는 덮 게의 형상에 따라 냉각공기 유속 0.5~0.4m/sec 조건에서 냉각실험을 하였고 냉각 해석 코 드인 Flotherm으로 컴퓨터 시뮬레이션하여 비교하였다. 그리고 각 덮게의 형상에 따라 30MHz ~1GHz 대혁에 걸쳐 전자파 차폐 실험을 하엿다. 실험결과 냉각 특성의 실험과 수 치해석 결과 잘 일치하였으며 공기 유속을 1.0m/sec 이상으로 유지시키면 덮개 형상에 무관 하게 열적으로 안저하였다. 30~700MHz 영역에서는 덮게로 인한 전자파 차폐효과가 뚜렷하 였으나 700MHz 이후의 대역에서는 접지와 접속되는 리이드의 임피던스 증가로 인하여 차 폐효과가 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2997-3002
• /
• 2011

A series of hybrid molecules between (R)-lipoic acid (ALA) and the acetylated or methylated polyphenol compounds were synthesized and their in vitro cholinesterase [acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE)] inhibition activities were checked. The $IC_{50}$ values of all hybrid molecules for a BuChE inhibition were lower than those of the single parent compounds. Specifically, ALA-acetyl protected caffeic acid (11, ALA-AcCA) was shown as an effective inhibitor of BuChE ($IC_{50}=0.5{\pm}0.2\;{\mu}M$) and also had a great selectivity for BuChE over AChE (more than 800 fold). Inhibition kinetic study indicated that 11 is a mixed inhibition type. Its binding affinity ($K_i$) value to BuChE is $1.52{\pm}0.18\;{\mu}M$.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.876-888
• /
• 2005

Tensile properties and fracture toughness of monolithic aluminum, fiber reinforced plastics and glass fiber/aluminum hybrid laminates under tensile loads have been investigated using plain coupon and single-edge-notched specimens. Elastic modulus and ultimate tensile strength of GFMLs showed different characteristic behaviors according to the Al kind, fiber orientation and composition ratio. Fracture, toughness of A-GFML-UD which was determined by the evaluation of $K_{IC}$ and $G_{IC}$ based on critical load was similar to that of GFRP-UD and was much higher than monolithic Al. Therefore, A-GFML-UD presented superior fracture toughness as well as prominent damage tolerance in comparison to its constituent Al. By separating Al sheet from GFMLs after the test, optical microscope observation of fracture zone of GFRP layer in the vicinity of crack tip revealed that crack advance of GFMLs depended on the orientation of fiber layer as well as Al/fiber composition ratio.

• 한국전자파학회논문지
• /
• 제29권8호
• /
• pp.632-639
• /
• 2018

본 논문에서는 130 nm 공정을 이용한 Ku-band에서의 송수신 칩을 사용하여 제작된 단일 안테나 모듈을 제안한다. 레이다 수신부에서 DCOC 피드백을 사용한 STC(sensitivity time control)가 거리에 따라 일정한 SNR을 유지한다. 또한 수신부 RF단에서 gain control을 통하여 수신단의 dynamic range를 조절할 수 있다. 칩의 출력 파워는 9 dBm이고, 수신부의 총 이득은 82 dB이다. 단일 안테나에서 Tx 신호가 Rx로 직접 누설되는 것을 막기 위해 stub-tuned hybrid coupler를 사용하였다. 최대 측정거리는 6 m이고, 혼안테나와 금속판을 사용하여 측정하였다.