• Parasites, Hosts and Diseases
• /
• 제50권3호
• /
• pp.239-242
• /
• 2012

The influence of temperature on the development and embryonation of Ascaris suum eggs was studied using coarse sand medium in an environmental chamber with 50% humidity. The time required for development and embryonation of eggs was examined under 3 different temperature conditions, $5^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. A. suum eggs did not develop over 1 month at the temperature of $5^{\circ}C$. However, other temperature conditions, $25^{\circ}C$ and $35^{\circ}C$, induced egg development to the 8-cell-stage at days 5-6 after incubation. All eggs examined developed to the 8-cell stage at day 6 after incubation in the sand medium at $25^{\circ}C$. The higher temperature, $35^{\circ}C$, slightly accelerated the A. suum egg development compared to $25^{\circ}C$, and the development to the 8-cell stage occurred within day 5 after incubation. The formation of larvae in A. suum eggs at temperatures of $35^{\circ}C$ and $25^{\circ}C$ appeared at days 17 and 19 after incubation, respectively. These findings show that $35^{\circ}C$ condition shortens the time for the development of A. suum eggs to the 8-cell-stage in comparison to $25^{\circ}C$, and suggest the possibility of accelerated transmission of this parasite, resulting from global warming and ecosystem changes.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.75-75
• /
• 2009

연성회로기판은 일반적으로 절연체를 이루는 폴리이미드와 전도체를 이루는 구리로 구성되어 있다. 폴리이미드는 뛰어난 열적 화학적 안정성, 기계적 특성, 공정성 등의 장점으로 인해 연성회로기판의 절연체로서 제안되었지만 전도체를 이루는 구리와의 접합 특성이 우수하지 않기 때문에 많은 연구가 현재까지 진행되고 있고, 그 결과 연성회로기판의 접합 특성에 많은 개선이 이루어짐과 동시에 다양한 공정 방법이 제안되고 있다. 하지만 고온다습한 환경에서 사용될 경우 폴리이미드의 높은 흡습성과, 구리와 seed layer의 산화 문제로 인해 접합 특성이 저하된다는 단점 또한 가지고 있다. 따라서 본 연구를 통해 고온다습한 조건하에서 seed layer가 80Ni/20Cr 합금으로 구성된 연성회로기판의 seed layer의 두께와 시효시간으로 인해 발생하는 접합 신뢰성의 차이를 관찰하였다. 본 연구에서는 두께 $25{\mu}m$의 폴리이미드 위에 각각 100, 200, $300{\AA}$ 두께의 80Ni/20Cr의 합금 조성을 가지는 seed layer를 스퍼터링 공정을 통해 형성한 후 전해도금법을 이용하여 $8{\mu}m$ 두께의 구리 전도층을 형성하였다. 접합 특성 평가를 위해 ICP 규격에 따라 전도층 패턴을 폭 3.2mm, 길이 230mm로 시편을 제작하여 50.8mm/min의 이송 속도로 각 시편당 8회의 $90^{\circ}$ peel test를 실시하였다. 또한 $85^{\circ}C$/85% 항온항습 조건하에서 각각 24, 72, 120, 168시간 동안 시효 처리 후 같은 방법으로 연성회로기판의 접합 특성을 평가하였다. 파면의 형상과 조성을 분석하기 위해 SEM (Scanning electron microscope)과 EDS (Energy-dispersive X-ray spectroscopy)를 사용하였으며, 파면의 조도 측정을 위해 AFM (Atomic force microscope)을 사용하였다. 또한 파면의 잔여물 분석을 위해 EPMA (Energy probe microanalysis)를 사용하였고 계면의 화학적 결합상태를 분석하기 위해 XPS (X-ray photoelectron spectroscopy)를 통해 파면을 분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권1호
• /
• pp.66-74
• /
• 2010

This study was carried out to investigate the optimum condition for sap exudation of Acer mono Max. tree in a site of Mt. Baekun, Kwangyang city, Korea. Amount of sap exudation, air temperature, relative air humidity and tree diameter at breast height (DBH) were monitored for the period of January 5 through March 28, 2008, and correlation analysis of several factors affecting on sap exudation was carried out. As the diameter of Acer mono at breast height increased, the amount of sap was linearly proportional. Sap exudation initiated at February 18, and occurred intensively in the period of February 28 through March 10, resulting in 84% of total sap amount by volume. During sap exudation, the minimum temperature was averaged at $-2.4{\pm}1.5^{\circ}C$ and the maximum at $6.0{\pm}1.8^{\circ}C$, while there was no sap exudation whenever temperature was below or above $0^{\circ}C$ all the day long. The maximum temperature, range of temperature and the maximum, minimum and mean humidities in air were significant factors affecting on amount of sap. The maximum air temperature had the highest correlation coefficient with 0.768 (P < 0.01) and was also considered as the principal factor by partial-correlation analysis. These results showed that sap exudation required daily air-temperature fluctuation from below to above $0^{\circ}C$, and the amount of sap was strongly dependent on the highest daily-temperature and DBH of tree.

• Korean Journal of Plant Resources
• /
• 제23권4호
• /
• pp.379-385
• /
• 2010

This study was carried out to develop cultivation techniques of Climacium japonicum in transparent pot. We analyzed effect of different soil moisture content, air exposure degree, bed soil and ground cover moss on the growth of Climacium japonicum. The best humidity condition in transparent pot culture was 60~80% and a mixture of bed soil with peatmoss : perlite as 7:3 ratio was effective to growth. Two holes(each diameter is 4 mm) in the cover were also effective to the growth and control moisture in the transparent pot. The best mixture of bed soil was moss with peatmoss : pelite(7:3) in the pot culture but price of moss is expensive, the moss treatment was not practical. Total of 10 moss species were selected as ground cover plant; Hypnum erectiusculum Sull. et Lesq., Thuidium kanedae Sak., Hypnum plumaeforme Wils., Trachycystis microphylla Lindb., Bryum argenteum Hedw., Hypnum oldhamii Jaeg., Funaria hygrometrica Hedw., Leucobryum glaucum Aongstr., Polytrichum commune Hedw. and Weissia controversa Hedw. The plant height of selected moss was smaller than that of Climacium japonicum so these moss were very effective to cover the ground.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제6권1호
• /
• pp.1-8
• /
• 1977

The sample persimmons were obtained from the of Yung-am Kun, Korea on October 24, and November 9, 1973. These persimmons were kept at room temperature overnight, then packed and stored on the following day at $0^{\circ}C$ and $85{\sim}100%$ humidity. Seven experimental items were studied : 1. control, 2. packing with excelsior in wooden boxes, 3. packing with rice hull in wooden boxes, 4. packing in bags of 0.03 mm polyethylene membrane, 5. packing in bags of 0.06 mm polyethylene membrane, 6. packing in bags of 0.08 mm polyethylene membrane, 7. packing in sealed desiccators. The dimension of polyethylene bags were $14{\times}28cm$ and three persimmons were packing in each bag. The results are as follows: 1. The persimmons both in polyethylene bags and in desiccators lost only 1 % or less of weight, while in control (1) packing with excelsior (2) or with rice hull (3) the loss was 6-7 % in weight after $2{\sim}3$ months. The persimmons became visibly shriveled and spongy-like in it's texture when it lost 5 % of weight. 2. Carbon dioxide content within the polyethylene bags and desiccators rapidly increased during the early storage period, and reached 5 % (in 0.03 mm polyethylene bags) to 50 % or more (in desiccator) after 1 month. In the polyethylene bags of 0.08 mm and desiccator, the carbon dioxide accumulated to a dangerous level and the persimmon showed physiological damage in a longer storage period. 3. The advance of after-ripening and deterioration of persimmon sealed in the polyethylene bags was slower than that in open bags when moved out to room temperature from the chilling and the polyethylene bags of 0.06 mm retarded the after-ripening most effectively. 4. On the basis of these results, a temperature of $0^{\circ}C$, relative humidity of almost $85{\sim}100%$ and combinations of 5 % oxygen and $5{\sim}8%$ carbon dioxide seem to be the optimum condition for the storage of persimmon (Teabong-Si). The most successful method of storing was to pack them in polyethylene bags of 0.06 mm and then to store them at $0^{\circ}C$.

• Polymer(Korea)
• /
• 제36권2호
• /
• pp.131-136
• /
• 2012

Residual stress is developed in the injection molded articles during the molding process due to temperature variation and shear stress. The residual stress causes the deformation and warpage in the injection molded parts shortly within several days or after several years. Therefore, the injection molding conditions should be optimized to reduce the residual stress. And residual stress in the part should be also relaxed after molding process to maintain its shape. According to the annealing conditions, such as relative humidity, temperature and time, this study investigates the relaxation of residual stress generated in the transparent injection molded specimens. Through the experimental results, it was realized that the residual stress was relaxed at a relative humidity higher than 50%. Utilizing photoelasticity equipment, it was found that the residual stress was rapidly relaxed near glass transition temperature. Additionally, we recognized that the specimen shrunk along the flow direction but expanded to the perpendicular direction of the flow during the annealing processes, which resulted in the warpage of the specimen.

• Journal of the Korean earth science society
• /
• 제23권5호
• /
• pp.424-435
• /
• 2002

This study analyzes the surface ozone and meteorological data in Daegu for a period from 1997 to 1999. It also investigates the meteorological characteristics of high ozone episodes. For this study the high ozone episode has been defined as a daily maximum ozone concentration higher than 100ppb in at least one station among six air quality monitoring stations in Daegu, Korea. The frequency of episodes is 13 days. The frequency is the highest in May and September. The average value of daily maximum ozone concentration is 81.6ppb, and 8-hour average ozone concentration is 58.6ppb for the high episodes. This shows that ozone pollution is continuous and wide-ranging in Daegu. The daily maximum ozone concentration is positively correlated to solar radiation and daily maximum temperature, but negatively correlated to relative humidity, wind speed and cloud amount. The maximal correlation coefficient to solar radiation is 0.45. The differences between high ozone episode day's daily mean meteorological value and monthly mean value are +1.58hPa for sea level pressure, +3.45${\circ}$C for maximum temperature, -5.69% for relative humidity, -0.46ms$^{-1}$ for wind speed, -1.79 for cloud amount, and +3.97MJm$^{-2}$ for solar radiation, respectively. This shows that strong solar radiation, low wind speed and no precipitation between 0700${\sim}$1100LST are favorite conditions for high ozone episodes. It is related to the morning stagnant condition.

• The Korean Journal of Pesticide Science
• /
• 제7권3호
• /
• pp.223-227
• /
• 2003

Survey on plant diseases occurring on cucumber cultivated in plastic film house of experimental farm in Suwon was conducted. Through the survey, occurrence of damping-off, downey mildew, powdery mildew and Fusarium wilt was observed. Especially downey mildew caused by Pseudoperonospora cubensis was the most severe foliar disease of cucumber. To control the disease effectively, effects of installation of ventilation fan and optimal spray timing of a chemical, dimethomorph+copper oxychloride WP, were investigated. Two ventilation fans installed at the front and at the back of plastic film house reduced air relative humidity by about 6.4% and downey mildew incidence by 55.7%. Downey mildew incidence on cucumber from untreated chemicals plot in plastic film house installed with ventilation fan was on a equal level with that from treated chemicals plot with three times application of dimethomorph+copper oxychloride WP in plastic film house without ventilation fan. Meanwhile in order to select optimal chemical application time, dimethomorth+copper oxychloride WP was treated three times at 7 days-interval from three days before the disease occurred, right after the disease occurred, and two days after the disease occurred, respectively. The result showed that dimethomorth+copper oxychloride WP applied to cucumber leaves and stems from three days prior to, right after, two days after occurrence of downey mildew reduced downey mildew incidence by 72.9, 61.8, and 23.7%, respectively. The above results showed that regulation of environmental factors like air relative humidity and preventive application of chemicals should be considered to establish control strategy to downey mildew.

• Journal of the Korean Wood Science and Technology
• /
• 제40권1호
• /
• pp.10-18
• /
• 2012

A high airtightness is required for the residential spaces constructed recently to save cooling and heating energy through improving insulation performance. Because the chances to release steam formed by human activity in building and inflow of water vapor in outdoor air to residential space are reduced, the natural humidity control performance of interior materials has become more important. In this study, hygroscopic performance of thermo-physically treated wood (Pinus koraiensis) was estimated. At various relative humidity condition, the water vapor adsorption and desorption rates of wooden materials were measured as well as equilibrium moisture content. Effects of roughness and surface microstructure as physical factors and functional groups as chemical factors on the hygroscopicity were analyzed. It is expected that the results from this study and further study of measuring moisture generation in residential spaces could contribute to install a system for evaluating the hygrothermal performance of wooden building.

• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.732-750
• /
• 2019

Air drying was carried out on 15 Korean red pine logs to provide a prediction model of the moisture content (MC) change in the wood during drying. The final MC was 17.4% after 880 days since the beginning of air drying in the summer for 6 Korean red pine logs with 68.7% initial MC. The final MC was 16.0% after 760 days since the beginning of air drying in the winter for 9 Korean red pine logs with 35.8% initial MC. A regression model with R-squared of 0.925 was obtained as a result of multiple regression analyses with initial MC, top diameter, temperature, relative humidity, and wind speed as independent variable and and MC change during air drying as dependent variable. The initial MC and top diameter, which is the characteristic of Korean red pine, have greater effect on the MC decrease during air drying compared to meteorological factors such as the temperature, relative humidity, and wind speed. Two-dimensional mass transfer analysis was performed to predict the MC distribution of Korean red pine logs during air drying. Two prediction models with different air drying days and different meteorological factors for the determination of the diffusion coefficient and surface emission coefficient were presented. The error between the different two methods ranged from 0.1 to 0.8% and the difference from the measured value ranged from 2.2 to 3.6%. By measuring the internal MC during air drying of Korean pine logs with various initial MC and diameter, and calculating the moisture transfer coefficient in wood for each meteorological condition, the error of the prediction model can be reduced.