• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.333-337
• /
• 2007

This study was conducted to assess effects of soil moisture condition and ventilation on development of fermented fruit of oriental melon. In higher soil moisture condition (-10 kPa), roots absorbed more water and transpiration was decreased under low temperature and high humidity conditions. Development of fermented fruit may be come from absorbed water concentrated placenta with higher soluble solid. Fermented fruit was developed with higher level at Shintozoa and Elite, was developed with lower level at Hongtozoa, and was not developed at self-rooting of oriental melon. Ventilation on fruit did not affect development of fermented fruit at Shintozoa, Elite, Hongtozoa and self-rooting seedling. Ca contents of flesh and placenta of fruit under ventilation treatment were higher than control but contents of Acetaldehyde, Ethanol and Ethylacetate were lower.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.428-436
• /
• 2013

Attrition characteristics of $CO_2$ absorbents for pre-combustion $CO_2$ capture were investigated to check attrition loss of those absorbents and to determine solid circulation direction and the better $CO_2$ absorbent. The cumulative attrition losses of two absorbents increased with increasing time. However, attrition loss under a humidified condition was lower than that under a non-humidified condition case. Between two absorbents, attrition loss of PKM1-SU absorbent was higher than that of P4-600 absorbent. The average particle sizes of the attrited particles were less than $2.5{\mu}m$ for two absorbents under a non-humidified condition case, and therefore, we could conclude that the main mechanism of attrition for two absorbents is not fragmentation but abrasion. Based on the results from the test for the effect of humidity on the attrition loss, we selected solid circulation direction from SEWGS reactor to regeneration reactor because the SEWGS reactor contains more water vapor than regeneration reactor. Attrition loss and make-up rate of two absorbents were compared based on the results from $CO_2$ sorption capacity tests and attrition tests. Required make-up rate of P4-600 absorbent was lower than that of PKM1-SU absorbent. However, more detail investigation on the optimum regeneration temperature, manufacturing cost, solid circulation rate, regeneration rate, and long-term sorption capacity should be considered to select the best $CO_2$ absorbent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5795-5801
• /
• 2015

The low temperature distribution of the refrigerated and frozen food has been increased gradually. Refrigeration industry is using R134a refrigerant, which GWP is 1300. R1234yf is an alternative refrigerant of R134a because GWP of R1234yf refrigerant is just 4. Evaporator used in refrigeration truck refrigeration system is operated on low temperature condition. Accordingly, evaporator is formed frost and the formation of frost is rapidly decreased performance of evaporator. In this study, the performance of evaporator using R134a and R1234yf refrigerant was analyzed with operating conditions under frost condition. As a result, the performance of R134a evaporator according to air inlet temperature, relative humidity and evaporating temperature was more sensitive than R1234yf evaporator. Besides, the frost growth of R134a evaporator is steeper than that of R1234yf one.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.148.2-148.2
• /
• 2013

We prepared hydrophobic PDMS-coated porous silica as pre-concentration adsorbent for chemical warfare agents (CWAs). Since CWAs can be harmful to human even with a small amount, detecting low-concentration CWAs has been attracting attention in defense development. Porous silica is one of the promising candidates for CWAs pre-concentration adsorbent since it is thermally stable and its surface area is sufficiently high. A drawback of silica is that adsorption of CWAs can be significantly reduced due to competitive adsorption with water molecule in air since silica is quite hydrophilic. In order to solve this problem, hydrophobic polydimethylsiloxane (PDMS) thin film was deposited on silica. Adsorption and desorption of chemical warfare agent (CWA) simulants (Dimethylmethylphosphonate, DMMP and Dipropylene Glycol Methyl Ether, DPGEM) on bare and PDMS-coated silica were studied using temperature programed desorption (TPD) with and without co-exposing of water vapor. Without exposure of water vapor, desorbed amount of DMMP from PDMS-coated silica was twice larger than that from bare silica. When the samples were exposed to DMMP and water vapor at the same time, no DMMP was desorbed from bare silica due to competitive adsorption with water. On the other hand, desorbed DMMP was detected from PDMS-coated silica with reduced amount compared to that from the sample without water vapor exposure. Adsorption and desorption of DPGME with and without water vapor exposing was also investigated. In case of bare silica, all the adsorbed DPGME was decomposed during the heating process whereas molecular DPGME was observed on PDMS-coated silica. In summary, we showed that hydrophobic PDMS-coating can enhance the adsorption selectivity toward DMMP under humid condition and PDMS-coating also can have positive effect on molecular desorption of DPGME. Therefore we propose PDMS-coated silica could be an adequate adsorbent for CWAs pre-concentration under practical condition.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.283-288
• /
• 2018

Since the crack self-healing materials are activated according to the exposure environmental conditions from the time of crack occurrence, it is very important to clarify the relationship between the healing performance and the exposure environmental conditions of the crack surface. In this paper, the influence of the exposure environmental conditions on the crack healing performance of self-healing repair mortar was investigated through the water permeability test. The influence of temperature and humidity on the crack width of cracked specimens was evaluated. As a result of measuring the change of the crack width, the effect of curing temperature was negligible but it was confirmed that crack-closing occurred due to the change of dry-wet condition. The healing materials produced on the crack surface of the specimens was identified as calcite minerals. Since the minerals with high density are precipitated under the influence of gravity, the healing performance is somewhat different according to the direction of the crack surface, and the healing performance was significantly improved in the wet exposure condition than the air exposure condition.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.4
• /
• pp.266-275
• /
• 2022

The impact of heat stress (HS) on reproductive performance and its problems in cows remains to be investigated in Bangladesh. The study was, therefore, aimed to evaluate the effect of HS on fertility and reproductive health problems of dairy cows in a selected area of Bangladesh. A total of 1,095 cows from 500 farms were included in this study. The climate-related data were recorded daily basis for every month in a year and temperature-humidity index (THI) values were calculated to determine the level of HS. Concurrently, data on fertility parameters [number of services per conception (NSC), conception rate (CR) and calving to the first service interval (CFSI)], and reproductive problems were collected through a pre-defined questionnaire. The results show that crossbred [Native x Holstein-Friesian, (HF)] cows were more vulnerable (p < 0.05) to a magnitude of HS effects considering physiological parameters of cows [age, body condition score (BCS), parity and milk yield]. Regarding fertility, HS had no effect on NSC, CR and CFSI in both native and crossbred cows (p > 0.05). The findings on the reproductive problems indicate that HS had significant influence on the prevalence of anestrus (χ² = 21.814, p < 0.05) and retained placenta (χ² = 24.632, p < 0.05) in cows. Of note, the prevalence of repeat breeding syndrome was 2.5 folds higher in stress condition than in no stress condition. Abortion and dystocia were not influenced by HS. In conclusion, HS does not influence the fertility parameters of cows studied; however, anestrus and retained placenta are likely to occur under HS conditions in cows.

• Journal of Wetlands Research
• /
• v.26 no.2
• /
• pp.160-167
• /
• 2024

The amphibians serve as environmental indicator species warning of threats from pollution and development, and information regarding their body condition and surrounding habitat can be utilized as crucial indicators for assessing ecosystem health. The objective of this study was to investigate the differences in body condition and the climate environments according to the season and sex of Class II endangered Kaloula borealis. A total of 53 surveys were conducted from June to October 2018, targeting frogs inhabiting the Godeok-dong area of Gangdong-gu, Seoul. Using the weight and length of each individual, the body condition index (SMI, Scaled mass index) was calculated. Results showed a total capture of 396 individuals, consisting of 235 males and 161 females. Females exhibited longer SVL and greater weight compared to males, with higher body condition indices. Monthly body condition indices were lower for males in June, while no differences were observed between males and females from July to September. Among the climate environments where females and males appeared, environmental variables related to precipitation and humidity showed differences. These research findings are deemed crucial for providing fundamental information to ascertain suitable habitats for Kaloula borealis and selecting alternative habitats due to developmental impacts in the future.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.49-55
• /
• 2016

The effects of post-annealing and temperature/humidity conditions on the interfacial adhesion energies of atomic layer deposited RuAlO diffusion barrier layer for Cu interconnects were systematically investigated. The initial interfacial adhesion energy measured by four-point bending test was $7.60J/m^2$. The interfacial adhesion energy decreased to $5.65J/m^2$ after 500 hrs at $85^{\circ}C$/85% T/H condition, while it increased to $24.05J/m^2$ after annealing at $200^{\circ}C$ for 500 hrs. The X-ray photoemission spectroscopy (XPS) analysis showed that delaminated interface was RuAlO/$SiO_2$ for as-bonded and T/H conditions, while it was Cu/RuAlO for post-annealing condition. XPS O1s peak separation results revealed that the effective generation of strong Al-O-Si bonds between $AlO_x$ and $SiO_2$ interface at optimum post-annealing conditions is responsible for enhanced interfacial adhesion energies between RuAlO/$SiO_2$ interface, which would lead to good electrical and mechanical reliabilities of atomic layer deposited RuAlO diffusion barrier for advanced Cu interconnects.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2011

The possibility of ASR(alkali-silica reaction) for coarse aggregates had known to be low up to recently in Korea. But the distress of ASR was identified and reported by ASTM C 1260 test. The purpose of this paper was to identify the effect of environmental conditions on length expansion of mortar-bar by alkali-silica reaction with KS F 2546 and ASTM C 1260 test. The results of this study were as following; The result of KS F 2546 test for five kinds of aggregates shows that all of them are non-reactive. But that of ASTM C 1260 test shows that all of aggregates except Andesite-2 are over possible reactive because of environmental condition such as external alkali ion by 1N NaOH, high temperature and humidity. The result of variety of NaOH concentration on ASTM C 1260 using Siltstone indicates that length expansion rate increases highly as NaOH concentration increases. And, comparison results of KS F 2546 for Siltstone with that of 0.00N NaOH experiment indicates that length expansion rate increases as temperature and humidity increases.

• Conservation Science in Museum
• /
• v.21
• /
• pp.29-40
• /
• 2019

An experimental study was conducted to test the applicability of natural hydraulic lime (NHL) as a reinforcing agent for the supporting layers of mural paintings in ancient tombs.Drawing upon preceding studies on mural paintings inancient tombs, samples of reinforcing agents for various conditions were prepared using NHL products, and pseudo-samples of the supporting layers of mural paintings were also produced. The samples were cured for 7, 28, and 84 days in a high-humidity condition similar to that of the mural-tomb environment. Physical properties such as dimensional stability and compressive strength were measured for each curing period.The results indicated that the NHL samples had a rapid curing speed and a low contraction ratio and are therefore suitable as reinforcing agents, whereas they showed a poor match in terms of strength compared to the supporting layer,and also low whiteness. The dimensional stability and compressive strength testsrevealedthat an NHL product mixed with a pseudo-sample of a supporting layer provided desirable conditions for reinforcing agent. The findings suggested that different conditions for curing time and strength should be considered for each supporting layer prior to applying NHL as a reinforcing agent for damaged mural paintings in ancient tombs.