• 생명과학회지
• /
• 제26권6호
• /
• pp.673-679
• /
• 2016

최근에 종양을 예방하거나 치료하기 위하여 안전하고 효과적인 항암화합물의 개발이 절실하게 요구되고 있다. 그 중에서 전통약재로부터 유래된 천연화합물은 항암후보소재로 관심의 대상이 되어왔다. 본 연구에서 사용된 aesculetin은 약용식물로 널리 알려진 산초나무의 주요 성분이다. Aesculetin은 항염증 및 항균과 같은 다양한 생물학적 효과를 가진다고 보고되었다. 그러나 세포침윤과 관련된 효과는 아직 발견되지 않았다. 그러므로 본 연구에서는 사람섬유아육종세포(HT1080)에서 항산화와 기질금속단백질분해효소(MMPs)에 대한 aesculetin의 효과를 조사하였다. 항산화 효과에 대한 연구에서 aesculetin은 DPPH radical에 대한 소거능뿐 만 아니라 환원력이 우수한 것으로 나타났다. 우선, MTT 실험을 이용하여 HT1080세포에서 aesculetin의 2 μM 이하의 농도에서 독성이 없는 것으로 나타났다. MMP-2와 MMP-9의 활성과 단백질 발현 수준에 대한 aesculetin의 억제효과는 gelatin zymography와 western blot을 이용하여 조사되었다. Aesculetin은 세포침윤과 관련된 MMP-9의 활성의 억제효과가 있는 것으로 나타났다. 더욱이, aesculetin은 TIMP-1의 단백질 발현 수준을 증가시켰으나, PMA로 자극된 MMP-9의 단백질 발현 수준을 감소시켰다. 더불어 aesculetin은 농도의존적으로 암전이와 관련된 세포침윤을 현저하게 억제하였다. 위의 결과들을 바탕으로, aesculetin은 세포침윤과 관련된 MMP의 활성과 발현의 억제를 통해 세포침윤을 예방할 수 있는 소재로서 기대된다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권3호
• /
• pp.302-313
• /
• 1995

연구배경: 종양괴사인자(Tumor necrosis factor; TNF)는 다양한 생물학적인 작용을 가지며 종양 세포에 대한 세포 독성은 그 대표적인 기능중의 하나이다. TNF-$\alpha$는 생체외에서(in vitro) 몇몇 종양 세포주에 대하여 항암제, 특히 topoisomerase II targeted chemotherapeutic agent의 세포 독성 효과를 상승적으로 증가시키는 것이 알려져 있다. 최근 암세포에 대한 cytokine 유전자 요법에서 TNF는 중요한 대상으로 여겨지고 있으며, 유전자 이입에 의해 암조직이 TNF를 생성하게 될 경우 암 증식 억제 효과가 있음이 보고되고 있다. 연구자는 암세포에 TNF-$\alpha$ 유전자를 이입하여 자신이 TNF-$\alpha$를 생성하도록 형질을 변환시킨 암세포는 topoisomerase II 억제 항암제에 대한 김수성에 변화가 있을 것이라는 가설을 수립하였고 이를 검증하고자 본 연구를 수행하였다. 본 연구에서는 생체외로(in vitro) TNF-$\alpha$ 유전자를 이입하여 TNF-$\alpha$를 생성하는 암세포주에서 topoisomerase II targeted drug에 대한 항암제 감수성 효과가 모세포주에 비하여 증대될 수 있는지를 알아 보고자하였다. 방법: TNF-$\alpha$에 감수성을 보이는 것으로 알려진 인체 중피종 세포주인 NCI-H2058 세포주 및 생쥐의 섬유육종 세포주인 WEHI164 세포주와 인체 비소세포 폐암 세포주인 A549 세포주를 배양하여, 먼저 임상에서 흔히 폐암의 항암 화학 요법 치료에 널리 쓰이는 대표적인 topoisomerase II targeted chemotherapeutic drug인 etoposide(VP-16)와 doxorubicin(adriamycin)을 가하였을 때 관찰된 세포 독성을 MTT assay로 측정하고, 각 모세포주(parenta1 cell line)에 TNF-$\alpha$의 유전자를 이입시켜서 형절 변환한 세포주(transformed cell line)에 대하여 각각 동일한 항암제를 가하였을 때 관찰된 세포 독성의 정도를 같은 방법으로 측정하여, 그 결과를 비교 분석하였다. 또한 모세포주에 외부에서 TNF를 가하여 전처치한 후 동일한 항암제를 가하였을 때의 세포독성을 관찰하여 비교 분석하였다. 결과: H2058 세포주에서는 TNF-$\alpha$ 유전자를 이입한 세포주 topoisomerase II targeted drug을 가하였을 때, 항암제 감수성이 모세포주에 같은 항암제를 가하였을 때에 비하여 의미있게 증가함을 관찰할 수 있었으나(p<0.05), WEHI 세포주와 A549 세포주에 있어서는 TNF-$\alpha$ 유전자를 이입한 세포주에서 모세포주에 비하여 항암제 감수성이 증가하지는 않았다. 결론: TNF-$\alpha$ 유전자의 이입이 topoisomerase II targeted chemotherapeutic drug에 대한 항암제 감수성을 증가시키는 효과는 세포주에 따라 다양한 결과를 보이는 것을 알 수 있었으며, 적어도 선택된 특정 종류의 호흡기계 암세포에 있어서는 TNF-$\alpha$ 유전자의 이입으로 항암제 감수성(chemosensitivity)을 증가시킬 수 있을 것으로 사료된다.

• 한국식품영양과학회지
• /
• 제30권5호
• /
• pp.921-927
• /
• 2001

각종 암세포에 대한 번데기동충하초(Cordyceps militaris) 추출물 및 분획물의 세포독성을 규명하기 위하여 암세포로 A549, MCF-7 HeLA, HT1080, Hep3B, KATOIII 및 K562를 이용하였고 그 결과, SRB assay에 의한 1 mg/mL의 에탄올 추출물 농도에서 HT1080, HeLa, Jep3B 그리고 A549는 각각 89.4%, 85.7%, 72.9%그리고 65.5%의 억제효과를 나타내었다. MCF7, HeLa 그리고 HT1080 세포의 경우는 핵산 분획물 1 mg/mL 농도에서 각각 92.9%, 90.3%그리고 97.0%로 다른 분획물보다 현전히 높은 억제효과를 나타냈다. KATOIII세포에 대한 억제효과는 1mg/mL 투여시 에탄올 추출물의 경우 61.5%를 보였고 부탄올과 물 분획물에서 각각 83.7%와 80.4%로 다소 높은 억제효과를 보였다. K562 세포에 대한 시료의 억제효과는 에탄올 추출물(1mg/mL)이 60.5%의 억제율을 보인데 반해 같은 농도에 서 에틸 아세테이트, 부탄올 및 핵산 분획물에서는 각각 88.6%, 806% 및 75.6%로 높은 억제 효과는 양성대조군의 11.2$\pm$0.8에 비하여 10, 20, 40, 80 mg/kg 의 농도에 10.5$\pm$0.8, 8.3$\pm$0.5, 7.8$\pm$0.3, 3.7$\pm$0.6로 8.7, 25.9, 30.4그리고 67.0%의 유의적인 억제효과를 나타내었다. 또한 각각의 분획물에 대한 소핵생성 억제효과는 유전손상물질(MNNG;150 mg/kg, I.P)만 투여한 양성대조군에 비해서 시료 농도를 10, 20, 40 80 mg/kg 처리하였을 경우 동이라한 시료 농도 80 mg/kg 에서 부탄올, 에틸 아세테이트, 물, 그리고 클로로포름 분획물이 각각 3.1$\pm$0.3, 3.7$\pm$0.6, 4.2$\pm$0.3, 4.8$\pm$0.3으로 72.3%, 67.0%, 63.3%그리고 57.1%의 순으로 소핵생성 억제효과를 나타내었으며, 그중 핵산 분획물이 2.8$\pm$0.5의 75.0%로 가장 높은 소핵생성 억제효과를 나타내었다.

• Tuberculosis and Respiratory Diseases
• /
• 제41권2호
• /
• pp.87-96
• /
• 1994

연구배경 : 종양괴사인자(tumor necrosis factor ; TNF)는 여러 암세포에 대해서 세포독성을 보임이 알려져 있다. 그리고, 최근 분자생물학적 발전에 힘입어 TNF 유전자를 암세포에 이입하고 발현시키는 연구가 그 동안 진행되었다. 이들 연구의 목적은, TNF를 전신적으로 쓸 경우 전신 부작용이 심하여 인체에 쓸 수 없는 현 단계에서 암세포 자체에서 TNF를 만들어 내어서 암세포 주위에서만 작용하게 함으로써 연체에 미치는 전신독성을 최소한으로 줄이고 암세포를 사멸시키는 것이었다. 암세포에 TNF 유전자를 이입함으로써 예상되는 항암효과가 성공을 거두기 위해서는 첫째, TNF 유전자가 이입된 암세포에서 분비된 TNF가 주위 암세포를 성공적으로 사멸시켜야 하고 둘째는 분비된 TNF가, TNF 유전자가 이입된 암세포 자신을 사멸시켜야 한다. 본 연구는 이 중 두번째 기전, 즉 TNF 유전자가 이입된 암세포가 자신이 분비한 TNF에 의해서 사멸되거나 또는 세포 독성이 나타날 수 있는가를 검증하는데 목적을 두었다. 방법 : TNF에 감수성을 보이는 인체의 중피종 세포주인 NCI-H2058과 생쥐 섬유육종 세포주인 WEHI164에 TNF-$\alpha$ 유전자를 retroviral vector를 이용하여 이입하고 TNF를 발현을 시도하였다. DNA 수준과 단백질 수준에서 TNF-$\alpha$ 유전자가 제대로 이입되어 발현되는지 PCR과 ELISA 및 bioassay(MTT assay)로 확인하였다. 그리고, TNF 유전자가 이입된 세포주가 자신이 분비하는 TNF에 사멸되는지 아니면 생존하는지 MTT(dimethylthiazolyl diphenyltetrazolium) assay로 알아보았다. 그리고, 만일 TNF 유전자가 이입된 암세포가 자신이 분비한 TNF에 사멸되지 않고 생존할 경우, TNF 유전자가 이입된 NCI-H2058-TNF와 WEHI164-TNF 암세포주가 외부에서 준 TNF에도 내성을 보이는지도 추가로 MTT assay 방법으로 확인해 보았다. 결과 : 1) TNF-$\alpha$ 유전자 이입 및 발현 확인 PCR을 시행한 결과, TNF 유전자가 이입된 NCI-H2058-TNF와 WEHI164-TNF 세포주는 790 base pair 크기의 진한 DNA band를 보인 반면 각각의 모세포주에서는 보이지 않아서 retroviral vector를 이용한 유전자 이입이 DNA 수준에서 이루어졌음을 확인할 수 있었다. 그리고, NCI-H2058-TNF와 WEHI164-TNF의 상층 배양액의 TNF양을 ELISA와 bioassay(MTT assay)로 측정한 결과, 생물학적 활성을 지닌 TNF를 각각 $23.6{\pm}0.84ng$/24h/$10^6cells$, $12.2{\pm}0.36ng$/24h/$10^6cells$ 생산함을 알 수 있었다. 2) TNF 유전자 이입 전후, 암세포의 TNF에 대한 감수성 비교 TNF 유전자 이입 전후의 TNF에 대한 세포주의 감수성(세포사망율)을 TNF의 농도 변화에 따라 비교한 결과, NCI-H2058의 경우 TNF 농도 100ng/ml에서 모세포는 $25{\pm}3%$의 세포독성을 보인 반면 TNF 유전자 이입 후에는 $3{\pm}2%$의 세포독성을 보여 통계적으로 유의한 차이가 있었다(p<0.01). 그리고, WEHI-164의 경우도 TNF 농도 100ng/ml에서 모세포는 $73{\pm}5%$의 세포독성을 보인 반면 TNF 유전자 이입 후에는 $3{\pm}2%$의 세포독성을 보여 통계적으로 유의한 차이가 있었다(p<0.01). 결론 : TNF에 감수성을 보이는 암세포주인 NCI-H2058과 WEHI164에 TNF 유전자 이입을 시행하고 TNF가 발현되게 하였을 때, TNF 유전자를 이입받은 두 암세포주 모두에서 자신이 생산해 내는 TNF에 내성을 보여 생존하였다. 뿐만 아니라 생존한 이들 세포는 외부에서 준 TNF에 대해서도 내성을 보였다. 따라서, 암세포에 대한 TNF 유전자 이입을 통한 유전자 요법이 성공을 거두려면 유전자 이입된 세포에서 분비하는 TNF의 면역 세포 동원 방법 등의 간접적인 항암기전이 필요할 것으로 생각된다.

• 생명과학회지
• /
• 제26권4호
• /
• pp.439-445
• /
• 2016

콩잎은 골다공증 및 유방암 발생을 예방한다고 널리 보고되고 있다. 이를 바탕으로 콩잎낙엽 에탄올 추출물(SBFL)을 제조하여 암 전이와 관련 있는 세포침윤에 대한 효과를 조사하기 위하여 섬유아육종세포(HT1080)에서 SBFL이 항산화와 matrix metalloproteinases (MMPs)에 미치는 영향을 분석하였다. 본 연구에서 활성산소의 소거 효과에 대한 SBFL효과는 DPPH radical, 환원력 및 지질과산화실험으로 평가되었다, 본 연구에서 SBFL은 양성 대조군으로 사용된 vitamin C 및 vitamin E와 비교 시 우수한 항산화 효과를 보여주었다. 다음으로 SBFL의 세포 독성을 측정하기 위하여 MTT assay를 수행한 결과 16 µg/ml 이상의 농도에서 세포독성을 보여주었다. SBFL은 gelatin zymography 실험에서 phorbol 12-myristate 13-acetae (PMA) 혹은 phenazine methosulfate (PMS)로 자극된 암 전이에서 중요한 MMP-9의 활성을 감소시켰다. 특히 SBFL은 단백질 발현 실험에서 SOD-1, p-FoxO-1의 발현을 증가시켰다. 더욱이 vascular endothelial growth Factor (VEGF)로 자극된 세포 침윤이 SBFL처리에 의하여 억제되는 것으로 나타났다. 이러한 연구결과를 바탕으로 SBFL은 뛰어난 항산화 효과는 산화적 스트레스를 감소시키고 MMP-9의 활성과 세포침윤을 억제시켜 암 전이의 예방을 위한 유효성분으로 이용될 수 있다는 것을 암시하고 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권4호
• /
• pp.314-320
• /
• 2001

Matrix metalloproteinases have long been viewed as ideal candidates for proteinases that enables tumor cells to permeated basement membrane defenses and invade surrounding tissue. There is growing evidence that the MMPs have an expanded role, as they are important for the creation and maintenance of a microenvironment that facilitates growth and angiogenesis of tumors at primary and metastatic sites. MT-MMPs are not secreted but instead remaining attached to cell surfaces. Although not all of the MT-MMPs are fully characterized, MT-MMPs have important role in localizing and activating secreted MMPs. The MMP genes are transcriptionally responsive to a wide variety of oncogene, growth factors, cytokine, and hormones. Currently, a number of MMP inhibitors are being developed and some have reached clinical trials as anti-metastatic or anti-cancer therapies. MT1-MMP is involved in the activation of proMMP-2. MT1-MMP is significant not only as a tumor marker but as a new target for chemotherapy against cancer. The purpose of this study was to evaluate the effects of protein kinase C inhibitor(genistein) on the proliferation of HT1080 and expression of MT1-MMP mRNA. Human fibrosarcoma cell line HT1080 was cultured and divided 2 groups. The experimental group was treated with $100{\mu}M$ genistein and incubated 12h, 24h for $[3^H]-thymidine$ uptake assay and northern hybridization individually. And the control group was treated with same amount of PBS for the above procedures. $[3^H]-thymidine$ incorporation was measured with ${\beta}$ ray detector. And RT-PCR and northern blotting for MT1-MMP mRNA was performed. The results were as follows 1. $[3^H]-thymidine$ uptake was reduced in experimental group with statistical significance. 2. MT1-MMP mRNA expression was significantly reduced in experimental group. These results showed that protein kinase C inhibitor (genistein) inhibited proliferation of HT1080 and almost completely blocked transcription of MT1-MMP mRNA. So, it is possible to use the protein kinase inhibitor (genistein) as anti-metastatic and anti-proliferative agent.

• 생명과학회지
• /
• 제31권11호
• /
• pp.980-986
• /
• 2021

염주괴불주머니(Corydalis heterocarpa)는 두해살이 풀로 노란 꽃이 피고 염주처럼 잘록한 열매를 맺는 것이 특징이다. 또한 우리나라 갯벌에서 서식하는 염생식물로 내건성, 내염성과 같은 독특한 생리적 기전을 가지고 있으며 민간에서 진통 경련 완화 치료제로 사용하고 있다. 본 연구에서는 항산화, 항염증, 항노화 등의 효과가 있는 것으로 보고되어 있는 염주괴불주머니(Corydalis heterocarpa)을 이용하여 용매분획물(H₂O, n-BuOH, 85% aq. MeOH, n-hexane)을 제조하였으며 이를 이용하여 PMA로 유도된 인간 섬유육종세포 HT-1080 세포에서 MMP-2, MMP-9의 발현 조절에 미치는 영향을 확인하였다. 염주괴불주머니 분획물 처리시 TIMP-1 및 TIMP-2를 증가시키면서 MMP-2 및 MMP-9의 mRNA 및 단백질 발현을 감소시키는 것으로 나타났다. 또한 염주괴불주머니 용매분획물 처리시 MAPKs 신호 전달 경로인 p38, JNK, ERK의 인산화를 억제하여 MMPs 발현을 감소시키는 것을 확인할 수 있었다. 특히 염주괴불주머니의 85% aq. MeOH와 n-hexane 용매분획물에서 MMP-2 및 MMP-9 발현이 효과적으로 억제되어 MMP 억제활성이 높은 물질이 들어있을 것으로 사료되며, 이를 통해 염주괴불주머니의 암 전이 억제 소재 개발을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.