• 한국표면공학회지
• /
• 제49권1호
• /
• pp.26-31
• /
• 2016

In this paper, the characteristics of a cavitation-erosion damage behavior on the STS 304 and hot-dip aluminized STS 304 under cavitation environment in sea water solution was investigated. The electrochemical experiments were carried out by potential measurement, anodic/cathodic polarization test, Tafel analysis, and also galvanostatic experiment in current density variables for the samples. The apparatus of cavitation-electrochemical experiment was manufactured in compliance with modified ASTM G-32 standard, with the conditions of sea water temperature of $25^{\circ}C$ and the measurement, amplitude of $30{\mu}m$. The damage behavior was analyzed by an observation of surface mophologies and a measurement of damage depth by a scanning electron microscope(SEM) and a 3D microscope, respectively, after electrochemical test. After polarization experiment under cavitation environment, much higher damage depths for the hot-dip aluminized STS 304 were observed comparing to the untreated STS 304. In addition, higher corrosion current density in hot-dip aluminized STS 304 presented than that of untreated STS 304 as a result of Tafel analysis.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.149-157
• /
• 1994

The formation of spangles on a hot dip galvanized sheet steel by spray cooling the molten zinc coating with air, water and 2.0wt% $NH_4H_2PO_4$ solution has been studied performing laboratory experiments, and their coating properties have been evaluated. Minimized spangles were easily formed by mist spraying the solution for 1 second at the low nozzle spray pressure onto the molten zinc at 420~$422^{\circ}C$ because the solute $NH_4H_2PO_4$ in the sprayed solution imparted a highly rapid cooling effect to the coating through its endothermic de-composition reactions and because the decomposed products acted as numerous nucleation sites for the mini-mized spangles on the coating. Good surface appearances sand sound coating properties were obtained on this coating. Only regular spangles were formed on the coating by the forced convective air cooling. At the high nozzle spray pressure, zero spangles were formed on the coating by the pure water spray cooling. However, the coating had a dull and rough surface with craters sand cracks.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• 한국표면공학회지
• /
• 제27권6호
• /
• pp.347-358
• /
• 1994

Estimation of durability for corrugated steel pipe(CSP) has been evaluated by using several analytical methods. This study, using a plain hot-dip galvanized CSP as the base line, addresses additional coatings such as polymers sand bituminous coatings that may be used to achieve a desired design life of at least 50years. The behavior of both the soil side and the effluent side of the pipe have been studied. It is estimated that CSP generally provides outstanding dura-bility with regard to soil side effects, and that virtually any required service life can be attained by selecting appropri-ate coatingss and/or thickness of steel substrate. This study is limited to storm drainage systemss carrying naturally oc-curring surface water only. The recommendation in this report do not apply to sanitary or industrial waste sewers or other conduits used to carry corrosive effluents.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.249-249
• /
• 2011

• 한국식품저장유통학회지
• /
• 제10권3호
• /
• pp.261-266
• /
• 2003

풋고추의 저장성 향상을 위한 저장전 열처리 조건을 구명하기 위하여 풋고추를 50, 55, 60, $65^{\circ}C$의 온수에 각각 10초 침지하여 열처리를 하였다 $65^{\circ}C$에서 10초 열처리한 경우는 열처리 직후 과육표면에 가열장해 현상이 나타났다. 온수에서 침지한 풋고추를 1$0^{\circ}C$의 저장고에서 4주 동안 저장하면서 관능적 품질, 화학적 품질과 미생물학적 품질을 측정하였다. 표면 색도 중 L 값은 저장 중 조금씩 감소하는 경향을 보였으며, a 값과 b 값은 저장 3주까지는 거의 변화가 없다가 저장 4주에서는 대조구의 경우 열처리구에 비해서 a값은 높아지고 b값은 낮아진 결과를 볼 때 저장 4주가 되면 대조구의 경우 열처리구에 비해서 표면색도가 초록색이 옅어짐을 알 수 있었다. 중량감소는 대조구와 열처리구 사이에 유의한 차이를 나타내지 못하였으나, 대조구의 경도와 생균수는 저장 3주까지는 차이가 없다가 4주에서 경도는 낮아지고 생균수는 높게 나타났다. 매운맛 성분인 capsaicin과 dihydrocapsaicin은 열처리 유무에 관계없이 저장 중 감소하는 경향을 나타내었으며, 대조구의 경우가 약간 높게 나타났다. 풋고추의 관능적 품질은 55$^{\circ}C$ 온수에서 10초 동안 열처리한 경우가 가장 우수하게 나타나 이 조건이 풋고추의 저장성 향상을 위한 저장전 열처리 조건으로 구명되었다. 풋고추를 3, 10, 17$^{\circ}C$에서 저장한 결과 대조구의 경우는 3$^{\circ}C$에서 저온장해를 받았으나 열처리구의 경우는 3$^{\circ}C$에서도 우수한 품질을 나타내어 열처리가 풋고추의 저온장해를 억제하는 효과가 있는 것으로 추정할 수 있었다.

• Corrosion Science and Technology
• /
• 제10권1호
• /
• pp.24-29
• /
• 2011

The greatest purpose of chromate treatment is to improve anti-corrosion by stabilizing a metal surface. Because metal surface forms a compound by absorbing oxygen or water in the air by being generally unstable, it is necessary to improve anti-corrosion of the metal by forming the metal surface with a stable film. When considering the economical efficiency and requirements together because the film of the metal surface treated with chromate has good anti-corrosion and the stability also in the air by being compact and strong, Chromate treatment has been used most up to the electronics industry from the auto industry. However, these days, because hexavalent chromium is both a toxic agent to be able to cause cancers and deadly poisonous environmental pollutant, the strong legal controls on its use is being imposed all over the world. Because of this reason, a new anti-corrosion method is being required. Also, by users' various demands, the passivations that have recently been developed require various characteristics such as conductivity, chemical resistance, alkali cleaning resistance as well as anti-corrosion. We could confirm the results such as excellent anti-corrosion compared to chromate, conductivity, chemical resistance and detergent resistance as the result of analysis of various characteristics of the galvannealed sheet steels coated with Cr-Free solution developed in this research.

• 한국지반환경공학회 논문집
• /
• 제7권6호
• /
• pp.35-44
• /
• 2006

의성 금성산 북부지역에서 지열자원의 탐사와 화도의 자세를 파악하기 위하여 여러 종류의 지구물리학적 탐사와 지질조사를 수행하였다. 이를 위하여 자력탐사, 자연전위탐사, 방사능탐사, 비저항탐사, 지표 부근에서의 온도검층 및 지질조사 등을 수행하였으며 그 결과를 요약하면 다음과 같다. 여러 종류의 지구물리학적 이상들이 백악기의 화도와 관련되어 나타난다. 비저항 및 온도검층에서 관찰되는 이상들은 지질구조 및 지열과 관련된 것으로 판단된다. 소규모의 방사능 이상들과 자연전위 이상들은 암석의 화학적 특성과 관련된 것으로 판단된다. 연구지역의 퇴적암의 층리는 불투수층인 화산암을 향하여 급한 경사가 발달하였으며 지하수와 지열자원의 배태를 위한 이상적인 지질구조를 형성하고 있다. 또한 본 연구지역의 지질과 연구지역 주변에 분포하는 두개의 기존 온천 부근의 지질은 경상계 퇴적암류와 화산암류로 분포되어 있어 서로 유사하였다.