• Korean Journal of Environmental Agriculture
• /
• v.37 no.3
• /
• pp.213-220
• /
• 2018

BACKGROUND: This study was carried out to determine characteristics of residual pesticides in time-dependent manner and calculate half-lives of the residual pesticides in fresh and dried Chinese matrimony vine. In addition, processing factors were calculated based on the residual concentrations in them. METHODS AND RESULTS: The test pesticides, etofenprox and fenitrothion, were sprayed onto the Chinese matrimony vine plants at once or twice (at seven-day interval) and then samples were collected at 0 (after 3 hours), 1, 3, 5 and 7 days after the last spraying. Dried samples were prepared in hot-air drying oven at $60^{\circ}C$ for 48 hours until water content of less than 20%. Residual concentrations of etofenprox in fresh and dried samples decreased by 54.0-60.9% after 7 days of the last pesticide-application. In case of fenitrothion, the concentrations were found to have decreased by 69.2-76.5%. Processing factors of etofenprox were 2.6-3.0 for the one-time spraying and 2.5-3.0 for the two-time spraying and those of fenitrothion were found to be 1.5-22 for the one-time spraying and 1.6-2.0 for the two-time spraying. First half-lives of etofenprox and fenitrothion in fresh and dried samples ranged from 5.0 to 6.3 and from 3.4 to 4.0 days, respectively. The third half-lives were found to be 15.0-18.9 and 10.2-12.1 days, respectively. CONCLUSION: Residual concentrations of the tested pesticides in the studied crop decreased, but those in the dried samples appeared to have increased. In addition, processing factor and half life were constant regardless of spraying times.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Environmental Mutagens and Carcinogens
• /
• v.15 no.2
• /
• pp.115-121
• /
• 1995

Bacterial mutagenicity of shellfish or canned products of red-muscle fish affected by hot-airdry processings and/or during storages was investigated by Ames preincubation method. Mussel (Mytilus edulis) and surf clam (Tapes japonica) dried under either 40$\circ$C, 50$\circ$C or 60$\circ$C until remained about 25 % water content was stored at 4$\circ$C or 25$\circ$C for 6 months. Commercially available canned product of pacific saury (Cololabis saira) and mackerel saury (Scotnberjaponicus), whose producer or date of manufacture was identical each other, was stored at 25$\circ$C for 6 months. Mutagenic substances from sample (25 g dry weight) were extracted and purified for mutagenicity assay against S. typhitnurium TA98 by the simultaneous distillation extraction (SDE) method (Lee et al. 1955). Mutagenicity of sample was expressed number of revertant per 25 g dry sample. Number of revertant from unheated mussel sample was appeared to be 135, relative to 22 from unheated surf clam sample. Mutagenicity of both shellfish was strongly affected by heat treatment, but a lesser extent by storage conditions, even at 25$\circ$C for 6 months. Revertants of the mussel sample dried at 40$\circ$C, 50$\circ$C, or 60$\circ$C was found to be 227, 779, and 883, respectively. Similar, but lower, mutagenicity was observed from the sample of surf clam dried at 40$\circ$C, 50$\circ$C, or 60$\circ$C than mussel. Mutagenicity of canned pacific saury and mackerel samples was not influenced by storage conditions. Number of revertant from pacific saury was 175 which was relatively higher than 5 from mackerel. Mutagenicity of fresh pacific saury and mackerel samples was significantly higher than that of their counterparts from canned products. These results indicate that mutagenicity of the shellfish was affected by heat treatment (40$\circ$C, 50$\circ$C, or 60$\circ$C) used for drying process, but not much by storage for 6 months at 4$\circ$C or 25$\circ$C and the mutagenicity of canned products of red-muscle fish was not influenced by storage, even at 25$\circ$C for 6 months.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.7
• /
• pp.909-913
• /
• 2009

This study was conducted to investigate the rehydration properties and the sensory quality of sun-dried (SD), hot-air dried (HD), and freeze-dried (FD) cooked rice as space food. Rehydration ratio of HD and FD were significantly higher than those of SD, but there was no significant difference between HD and FD (p<0.05). A cross section of SD showed the smooth surface without any cavities. While HD showed large cavities, many small air cells in FD were observed by a scanning electronic microscope. Stickiness/hardness ratio of HD was similar to that of FD and significantly higher than SD (p<0.05). Also, sensory properties of HD and FD were significantly higher than those of SD, but there were no differences between HD and FD (p<0.05).

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.244-248
• /
• 2013

This study was carried out to investigate the residual characteristics and calculate processing factor of the environment friendly material matrine in fresh chilli pepper by drying. Spray solution of matrine was prepared by dilution of the commercial product (2% active ingredient) with water at 1 : 1000 (v/v) ratio and sprayed onto chilli pepper plants at seven day intervals. Samples were collected at 0, 1, 3, 5 and 7 days after last application and then dried using a hot air dry oven at $60^{\circ}C$ for 36 hours until the water content was reduced to 14%. Recoveries and storage period stabilities of matrine in the samples ranged from 106.6 to 119.1% and 106.6 to 113.1%, respectively. The residual concentrations of matrine in fresh chilli pepper and dried chilli peppers treated only once were found to be from less than 0.01 to 0.11 and from 0.03 to 0.25 mg/kg, respectively. In case of plants sprayed twice with matrine, the residual concentrations ranged from 0.02 to 0.12 and from 0.04 to 0.4 mg/kg, respectively. Processing factor of matrine in the fresh chilli pepper by drying was found to be from 1.5 to 3.3, indicating that the residual concentration of matrine in dried chilli pepper increased about two or three times by drying.

• Clean Technology
• /
• v.29 no.4
• /
• pp.288-296
• /
• 2023

Coal is abundantly available compared to other energy sources and is used as a versatile energy resource worldwide. To address the environmental issues stemming from conventional coal utilization, efforts are underway to develop clean coal utilization technologies, with IGCC technology being a notable example. In IGCC plants, coal is subjected to a CMD process where both drying and pulverization are achieved by supplying hot air. However, if the temperature of the supplied hot air is excessively high, it can lead to devolatilization and spontaneous combustion, thereby compromising the stable operation of the CMD process. This study aimed to measure the devolatilization and spontaneous combustion temperatures of different types of bituminous coal, and to explore their correlations with the characteristics of the coals. Six coal types exhibited devolatilization between 350 and 400 ℃, while three coal types showed devolatilization at temperatures exceeding 400 ℃. Spontaneous combustion ℃curred in one coal type below 100 ℃, six coal types between 100 and 150 ℃, and two coal types above 150 ℃. The measured initiation temperatures were compared with the coal characteristics including the oxygen, moisture, Fe₂O₃, and CaO content, the H/C ratio, and the O/C ratio to establish correlations. Regression analysis was used to calculate the regression coefficients and determination coefficients for each ignition temperature. It was found that 52.44% of the FC/VM data significantly influenced the volatile matter ignition temperature, and 59.10% of the Fe₂O₃ data significantly affected the spontaneous combustionignition temperature.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.325-329
• /
• 2014

To maintain the quality of sweet persimmon during storage, the samples were treated with a combination of 50 ppm $ClO_2$ and 0.1% fumaric acid after harvest, packaged with low density polyethylene film, and stored at $1{\pm}1^{\circ}C$ for 35 days. The combined treatment reduced the populations of total aerobic bacteria, yeast and molds by 1.82 and 2.07 log CFU/g, respectively, compared to the control. During storage, hardness of all samples decreased, but total soluble solids and weight loss were not significantly different among treatments. In addition, high-quality dehydrated sweet persimmon was prepared using red algae extract as a dehydrating agent. The rehydration ratio and vitamin C content of red algae extract-treated sample were greater than those of hot-air dried sample. These results suggest that the combined treatment of $ClO_2$ and fumaric acid can be useful for maintaining microbiological safety of sweet persimmon during storage and dehydration of sweet persimmon slices using red algae extract is an efficient drying method for the preparation of high-quality dehydrated sweet persimmon.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.6
• /
• pp.1049-1057
• /
• 2015

This study investigated the physicochemical properties of Dioscorea batatas for improvement of biological activities during a three-step steaming process, steaming $120^{\circ}C$ for 30 min and hot air drying at $60^{\circ}C$ for 8 hrs. Samples were extracted with 70% ethanol and analyzed for free sugars, and organic acids were analyzed by HPLC. The DPPH & ABTS radical scavenging activities, crude saponin, water binding capacity, oil absorption, and ${\alpha}$-glucosidase activity were measured. The major free sugars in all samples were fructose, maltose, and sucrose, and the free sugar contents increased to 157~235% after the three-step steaming process compared to the control. Organic acid contents of samples treated by steaming increased to greater than 55.8 mg/100g. The ABTS radical scavenging activity significantly increased with repeated steaming process, especially after the three-step process. As the time of steaming process increased, DPPH radical scavenging activity increased from 26.99% fresh Dioscorea batatas to 80.46~97.79% after the three-step process. Crude saponin content increased rapidly as steaming time increased, but decreased after the three-step process steaming process. The water-binding capacities of the samples treated by steaming process were higher than that of the control, whereas oil absorption decreased as steaming time increased. From the results, steaming process could be suggested as beneficial for controlling fat intake. Compared to acarbose, a known antidiabetic drug, used as a positive control, ${\alpha}$-glucosidase inhibitory activity of samples treated by two-step steaming was among the samples. The results suggest that Dioscorea batatas treated by steaming process has antioxidative and anti-diabetis activities and can be used as a natural health product.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.776-784
• /
• 2016

In this study, green Larix kaempferi lumber was heat-treated by using superheated steam (SHS) at a pilot scale and then various physico-mechanical properties of the heat-treated wood were evaluated and compared with the properties of conventional hot air (HA) heat-treated wood. Decay resistance of brown rot fungi and compressive strength parallel to the grain of the SHS heat-treated wood without occurrence of drying check from green lumber were increased. On the other hand, density, equilibrium moisture content, shrinkage, and bending strength of the SHS heat-treated wood were lower than those of the conventional HA heat-treated wood. Because heat transfer and thermal hydrolysis of SHS heat treatment was accelerated by a large amount of water, the effect of SHS heat treatment on the physico-mechanical properties was higher than that of HA heat treatment at the similar conditions of temperature and time. From the results of this study, because green lumber can be heat-treated without occurrence of cracks or checks by using SHS and similar heat treatment effect on the physico-mechanical properties of wood can be produced despite a low temperature or short time of heat treatment, it is expected that heat time and energy consumption could be reduced by using SHS.