• Journal of architectural history
• /
• v.12 no.1 s.33
• /
• pp.25-41
• /
• 2003

This paper is a study of Le Corbusier's trace regulateur of the 1920s, particularly its role in the design of the Villas La Roche-Jeanneret and Stein-de Monzie. It proceeds on the basis of the following three themes: first, the relation between the regulating line and the dom-ino frame; second, its status as a proportional device based not on a module system but one that defines relations; third, its function as an essential practical device in the design process. In the Villa La Roche-Jeanneret, the embedded horizontal planes of the dom-ino frame were constant, but the vortical lines of the columns were altered according to the changes in plan. Initially, a left-hand bay window formed a symmetry with the right-hand bay window, the only constant in the design process. With subsequent changes, mullion sections of the horizontal window and roof elements came to provide the reference points for the regulating line. Eventually, a regulating line different from the one that controlled the bay window and the elongated volume came to control the entrance hall of Villa La Roche, resulting in three different kinds of regulating lines in the final version. In contrast to the Villa La Roche-Jeanneret, a singular and consistent regulation line was anticipated in the earliest design stages of the Villa Stein-de Monzie. The repetition of its A:B grid and the standard $2.5m{\times}1.0m$ sliding window determined the proportions of both its plan and elevation, and thus the regulating line became 'automatic,' losing its viability as a practical tool. Though the regulating titles of the La Roche-Jeanneret look as if they were an afterthought, drawn after the design was complete, they were most active, requiring tenacity and discipline in their application. On the other hand, the seemingly 'redundant' regulating line of the Villa Stein-de Monzie gains its raison d'etre from the dom-ino frame. Its cantilevers and uninterrupted horizontal window could be used in decisive fashion because of the guarantee that the correct proportion would always be maintained. Thus we discover that Le Corbusier's discipline of the 1920s had a certain spectrum of flexibility. His 'parti' ranged from the extremely loose and malleable grid of the Villa La Roche-Jeanneret to the fixed grid of the Villa Stein-de Monzie. In different ways, these projects retain the tension between the dom-ino frame and the regulating line. For Le Corbusier, as much as the grid was an object with fixed attributes, it was also an active medium manipulated by the will of the architect.

• Journal of computational fluids engineering
• /
• v.21 no.2
• /
• pp.47-53
• /
• 2016

This study investigated natural convection flow behavior in airflow path designed in concrete dry storage cask to remove the decay heat from spent nuclear fuels. Using FLUENT 16.1 code, thermal analysis for natural convection was carried out for three dimensional, 1/4 symmetry model under the normal condition that inlet ducts are 100% open. The maximum temperatures on other components except the fuel regions were satisfied with allowable values suggested in nuclear regulation-1536. From velocity and temperature distributions along the flow direction, the flow behavior in horizontal duct of air inlet and outlet duct, annular flow-path and bent pipe was delineated in detail. Theses results will be used as the theoretical background for the composing of airflow path for the designing of passive heat removal system by understanding the flow phenomena in airflow path.

• Development and Reproduction
• /
• v.24 no.1
• /
• pp.1-17
• /
• 2020

Phthalates and those metabolites have long history in industry and suspected to have deficient effects in development and reproduction. These are well-known anti-androgenic chemicals and many studies have examined the effects of these compounds on male reproduction as toxins and endocrine disruptors. Uterus is a key organ for proper embryo development, successful reproduction, and health of eutherian mammals including women. To understand the effects of the phthalate, the horizontal approach with a whole group of phthalate is best but the known phthalates are huge and all is not uncovered. Di-(2-ethylhexyl) phthalate (DEHP) is the most common product of plasticizers in polymer products and studied many groups. Although, there is limited studies on the effects of phthalates on the female, a few studies have proved the endocrine disrupting characters of DEHP or phthalate mixture in female. An acute and high dose of DEHP has adverse effects on uterine histological characters. Recently, it has been revealed that a chronical low-dose exposing of DEHP works as endocrine disrupting chemicals (EDC). DEHP can induce various cellular responses including the expression regulation of steroid hormone receptors, transcription factors, and paracrine factors. Interestingly, the response of uterus to DEHP is not monotonous and the exposed female has various phenotypes in fertility. These suggest that the exposing of DEHP may causes of histological modification in uterus and of disease in female such as endometriosis, hyperplasia, and myoma in addition to developmental and reproductive toxicity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.743-749
• /
• 2012

In this paper, we designed and fabricated LED navigation lights which can replace the existing ones immediately and overcome disadvantages due to use of conventional lamps. To decide the best arrangement and position of a LED module, optical systems of existing navigation lights were analyzed and refracted routes of rays were simulated. The electrical and optical characteristics of the fabricated LED navigation lights were measured and analyzed with a goniophotometer. To calculate ranges of visibility, the vertical and horizontal luminous intensity distributions were evaluated in accordance with the COLREGs (convention on the international regulation for preventing collisions at Sea). From the results, the proposed LED navigation lights showed suitable characteristics for marine environment with the power consumption reduced by 90% and the maximum luminous intensity increased by 20% compared to the existing navigation lights.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.45
• /
• pp.165-188
• /
• 2010

The repeal of the block exemption for liner conferences and the abolition of any "special EC antitrust regime" for the shipping industry marks an important step in European maritime competition policy. This article examines the origins and the rationale of the EC antitrust immunity granted so far to the shipping industry and explains the causes of this historical change. Moreover, based on the precedents which have appeared so far, a general assessment is offered under this new EC regime on agreements restricting competition in the liner shipping industry, in particular horizontal ones: conference and tariff/freight arrangements will be doomed, whereas the legitimacy of consortia agreements should not be cast in doubt; a case-by-case analysis will be the approach as regards exchange or dissemination of information by shipowners in the market, and the relevant case law which emerges on these matters in other industries will be the criterion for their evaluation. Finally, a few remarks are made in respect of the international dimension of the decision to outlaw liner conferences and hence carve out EU Member States from the UN Code of Conduct regime.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.11
• /
• pp.826-835
• /
• 1987

In this paper, the horizontal output and flyback transformer (FBT) stages during the retrace time are represented by a new simplified equivalent circuit. The circuit analysis is performed by means of this equivalent circuit and the computed results are compared with those of experiment The results show that for fixed other circuit parameters, the high voltage regulation depends upon the coupling factor of transformer, the V-I characteristics and the charge storage of the high voltage rectifying diodes. The computed output voltages are found to be about 3.9 to 5.8% higher than the measurements and these are probably due to the neglection of the transformer losses. These acceptable errors show that the newly suggested equivalent circuit is reasonable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.71-76
• /
• 2018

Recently, various technologies have been developed for road facilities to reduce the load, some of which use technologies employing perforated plates for wind load reduction. Currently, there are no regulations concerning the drag coefficient of perforated plates for domestic road facilities. In the United States, the regulations regarding the drag coefficient of perforated plates in the 'Minimum design loads for buildings and other structures' were revised based on the studies of Letchford (2001) and Giannoulis (2012). In this study, a wind tunnel test was carried out to analyze the feasibility of applying regulations involving the perforated plates' drag coefficient. The results of the wind tunnel test and the drag coefficient used in the regulation were compared and analyzed. In addition, the reduction effect of the cross area of road signs calculated by applying the drag coefficient was analyzed. The results of the wind tunnel test and the value of the drag coefficient used in the regulation in the US were found to be very similar. Therefore, it was found that it is possible to apply the formula involving the drag coefficient of the perforated plate to the regulation and that the cross area of the perforated plate used for the post of the road sign is reduced by about 9.45% and that of the horizontal post by about 6.45%.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.23-24
• /
• 2014

NGII (National Geographic Information Institute) has been providing VRS (Virtual Reference Station) service so that could determine precise positioning in real time since 2007. However, since the VRS service has to maintain the connected status with VRS server, the number of users who can use VRS service are limited by capacity of VRS server. To solve this problem, NGII has been providing FKP (Virtual Reference Station) service using one way telecommunication from November 1, 2012. Therefore, it is predicted that the usage of FKP service will increase in public surveying and cadastral resurveying in the future. However, the studies with respect to analysis of FKP precision for applying to public surveying and cadastral resurveying is not conducted enough. In this study, to analyse the application possibility of FKP on the public surveying and cadastral resurveying, the two kind analysis were performed. First is the analysis of accuracy according to the configuration of reference station of FKP and VRS. One is consisted of same reference stations, another is consisted of different reference stations. Second is the accuracy anlalysis of horizontal and vertical positioning acquiring VRS and FKP data in various measurement environment based on VRS regulation. Result of first study, Positioning accuracy according to the configuration of the reference stations satisfies related regulation. However, accuracy of FKP in case of different reference stations is worse than in case of same reference stations.. The result of second test shows that the horizontal precision of FKP and VRS in good measurement environment satisfy the allowed precision. However, in some case, horizontal precision of FKP and VRS in poor measurement environment exceed the allowed precision. In addition, the number of exceeding the allowed precision in the FKP is more than the VRS. The vertical precision of the VRS satisfy related work provision. In conclusion, the result of this study shows that the FKP only in open area should be used for public survey and cadastral resurvey. Therefore the additional studies with respect to the improvement of FKP precision should be conducted.

• Journal of Korean Society of Transportation
• /
• v.23 no.6 s.84
• /
• pp.41-53
• /
• 2005

The effective utilization of an airport is considerably influenced by natural features and man-made structures inside and outside its boundary. These obstacles affect the airspace available for approaches and departures and the weather minima which dictates the necessary weather conditions for aircraft to be allowed to take-off or land. Certain areas of the airspace near airports must be regarded as the integral parts of the airport system. The availability of the required airspace is as important as are the runway and their associated strips to the safe and efficient use of the airport. For these reasons, ICAO and the member states have established the standards regarding the obstacle limitation surfaces and regulated the construction of the man-made structures in and beyond the surfaces. Existing objects that extend above a obstacle limitation surfaces should as for as practicable be removed except when, in the opinion of the appropriate authority, an objects is shielded an existing immovable objects, or after aeronautical study it is determined that the object would not adversely affect the safety or significantly affect the regularity of operations of airplanes. However, Korea's aviation law does not specified the outer horizontal surface in the obstacle limitation surfaces, while ICAO and most member states do. The absence of the outer horizontal surface regulation has created legal disputes between regulating agencies and private parties. The case study in this paper found that a skyscraper planned beyond Korea's obstacle limitation surfaces does affect the flight safety and the efficient use of an airport. Therefore, in areas beyond the obstacle limitation surfaces. those objects which extend to a height of 150m or more above ground elevation should be regarded as obstacle, unless a special aeronautical study indicates that they do not constitute a hazard to airplanes. We proposed low alternative regulatory schemes for resolving the issues raised in this paper, and we recommended to adopt ICAO's standards and recommended practices.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.191-200
• /
• 2009

Aerial digital camera was used in outside since 2000 because of technical development & improvement of it. In korea, line type or frame type digital camera introduced since 2006 was used in manufacture and Correction of National base map appling the number and distribution of control point of analogue aerial triangulation from 2008. The main objective of the study is to compare and analyze the effects of the number and distribution of control points in accuracy of results, when we execute aerial triangulation with images from ADS40, line type sensored aerial digital camera available in korea. The result of RMSE can be concluded that accuracy of all the case are meet the aerial photograph surveying work regulation of NGI as to horizontal of control point ${\pm}0.068m$, ${\pm}0.073m$, ${\pm}0.071m$, height ${\pm}0.041m$, ${\pm}0.055m$, ${\pm}0.055m$, ${\pm}0.041m$, as to horizontal of check point ${\pm}0.167m$, ${\pm}0.113m$, ${\pm}0.110m$, height ${\pm}0.128m$, ${\pm}0.086m$, ${\pm}0.081m$. We have confirmed that it is possible to make out large scale digital topographic map.