• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.31-39
• /
• 2007

The purpose of this study was to observe the kinematic pattern of elite women 100m hurdler race from start to finish and analyze how the change of horizontal velocity makes an influence on the athletes' performance. The analysis was based on the performance of Korean elite 100m hurdler A and international elite hurdlers B and C. Following results were drawn from the analyzation of elite 100m hurdlers' technical characteristics; During the race, hurdler A made more than 8 m/s of horizontal velocity at the 3rd, 4th, 6th, and the 7th hurdle. The horizontal velocity peaked at the 4th hurdle with 8.23 m/s. On the other hand, hurdler B and hurdler C maintained more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. Hurdler B's fastest horizontal velocity was 8.67 m/s from the 6th to the 7th hurdle and hurdler C's fastest horizontal velocity was 8.85 m/s from the 5th to the 8th hurdle. From the start line to the 3rd hurdle, the times achieved by hurdlers A, B, and C were 4.90 sec, 4.65 sec, and 4.52 sec. In the middle of the race, which is from the 4th hurdle to the 7th hurdle, hurdlers A, B, and C ran in 9.10 sec, 8.60 sec, and 8.38 sec. And the latter part of the race to the 10th hurdle, the times hurdlers A, B, and C hit were 12.32 sec, 11.66 sec, and 11.32 sec. To the finish line, it took 1.15 sec for hurdler A, 1.1 sec for B, and 1.06 sec for C. Hence, to set the record of sub-13 sec, hurdler A should improve her acceleration from the start line to the 1st hurdle with the speed more than 5.4 m/s and should maintain more than 8 m/s of horizontal velocity from the 2nd hurdle through the 10th hurdle. In addition, hurdler A should improve her speed endurance to minimize the deceleration of horizontal velocity from the 4th hurdle to the final hurdle. If hurdler A could shorten 0.05 sec of time in each hurdle section, she would be able to set the record under 13 seconds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.25-29
• /
• 1989

The author analized 17 complete denture patients with lateral cephalometric roentgenograms and following results were obtained: 1. The angle between the Ala tragus line and the occlusal plane was $4.38^{\circ}$. 2. The angle between the Ala tragus line and the Frankfort horizontal plane was $13.68^{\circ}$. 3. The line between the mouth corner and the retromolar pad was more parallel to the occlusal plane than the Ala tragus line.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.761-770
• /
• 1997

71 Class I malocclusion samples were selected and they were divided into premolar-extraction and non-extraction groups. Vertical and horizontal cephalometric evaluations on dental and soft tissue measurements were done before and after treatment. Also, treatment results in adolescent patients and adult patients were compared. The following conclusions were obtained: 1. In comparison of extraction and non-extraction groups, all the dental and soft tissue measurements, with exception of SN-MP angle, upper lip to E-line, vertical movement of upper first molar, md horizontal movement of lower first molar, showed statistically significant differences. 2. In comparison of extraction and non-extraction groups of adolescent samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips, and mesial movements of upper first molar. 3. In comparison of extraction and non-extraction groups of adult samples, there were statistically significant differences in upper and lower incisor inclinations, horizontal dental movements from vertical reference line, positional changes in upper and lower lips from I-line and vertical reference line, vertical height of upper first molar, and mesial movement of lower first molar. 4. There was no statistically significant difference in SN-MP angle between extraction and non-extraction groups of both adolescent and adult samples.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.89-100
• /
• 2001

The major purpose of this study is to show exact and convenient devices and minimize error in body measurement. This study was referred to 13 records and compared 6 items that the investigator's opinion has been differed about anthropometric point and line and suggested convenient and radical device, and measured by if need be. The 30 students from 20 to 25 ages were measured and data was analyzed by mean, std. deviation and paired t-test. The results are as follows. 1. Side neck point has been suggested many devices, but was suggested in this study to decide by M. trapezius, cervicale point and fossa jugularis point. 2. Shoulder point was suggested to decide by point of 1/2 armhole depth, upper arm depth and shoulder depth except acromion point. 3. Waist circumference line has been differed between horizontal line and natural line. The result of measurements was no significant difference between two methods and natural line was convenience. Waist circumference line must considered two methods together for garment construction and somato type. 4. The standard of hip circumference line has been differed between buttock point and trochanterion point. The result of measurements was significant difference between two methods, but two point must considered together because of body type. 5. Chest circumference line at scye has been differed between horizontal line and natural line. The result of measurements was significant difference between two methods and natural line was convenience. Chest circumference line at scye must studied to decide method the line for garment construction.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.789-797
• /
• 2014

In general, the image of interlaced side-by-side (SBS) streams is not good because it goes through two reconstruction steps-de-interlacing and horizontal interpolation. Especially the accuracy of horizontal resolution is greatly deteriorated as processed de-interlacing value is used for reference of interpolated pixel at time of horizontal interpolation. To solve this problem, we propose an improved method considering interlaced SBS stream's characteristics. In this paper, we adopted two separate methods to transmitted line and blank line for using reliable information. The experimental result of the proposed method is better than the conventional algorithm in terms of subjective and objective image quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.887-894
• /
• 2006

This paper proposes a new method that detects the intersection points of handwritten Hangul strokes using run-length. The method firstly finds the strokes' width of handwritten Hangul characters using both horizontal and vertical run-lengths, secondly extracts horizontal and vertical strokes of a character utilizing the strokes' width, and finally detects the intersection points of the strokes exploiting horizontal and vertical strokes. The analysis of both the horizontal and the vertical strokes doesn't use the strokes' angles but both the strokes' width and the changes of the run-lengths. The intersection points of the strokes become the candidated parts for phoneme segmentation, which is one of main techniques for off-line handwritten Hangul recognition. The segmented strokes represent the feature for handwritten Hangul recognition.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.739-744
• /
• 2018

This paper presents the results of numerical modeling studies on the effect of displacements of tunneling in granular soils. Presence of building loads is considered, to find displacement generated at the surface on tunnel. Effect of varying eccentricities of building is simulated, to find influence of building on vertical and horizontal displacement. Studies were carried out in two cases of with and without a geosynthetic layer installed at the bottom of the footing. Results of analysis revealed, the presence of geosynthetic layer under footing, with building placed on centre line, reduced the surface displacements compared to displacement generated without geosynthetic layer. Presence of geosynthetic layer under footing had a dominant effect in reducing displacements in high storey structures. However, when the building was shifted to greater eccentricities from centre line, presence of geosynthetic layer, led to insignificant reduction of displacements on the centre line at the surface.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.409-412
• /
• 2001

This paper decides provision of brightness by average value of horizontal pixel, vertical pixel association. Give weight at association value calculation to improve diagonal line characteristics, and applied method to add average of vertical pixel and average of diagonal line pixel at interpolation. Therefore it improves PSNR, and it proposed algorithm that improve horizontal outline and vortical outline characteristics in big area of luminance contrast. It changed scanning line of serial scan based on proposed algorithm and designed variable image system for efficient data transmission through PCI interface circuit.

• Journal of the Korean Society of Costume
• /
• v.60 no.3
• /
• pp.1-9
• /
• 2010

The purpose of this study is to develop Blue-Jean Design for Ideal Body Shape. The final aim of Fashion design is looks beauty of people by optical illusion. This study is based on Gestalt therapy and, is blue jeans design using optical illusion of vertical line for ideal beauty body image. Optical illusion for blue-jean design effect to achieve the ideal body shape. We can accumulate the preceding study for modern clothing from design and the related optical illusion effects. Vertical line stitches have all the advantages especially in pants design. I design blue jeans using optical illusion theory. The results of this study are as follows: First, Vertical line helps that jean has the long body shape effectively. Second, Jeans which have two or more vertical lines is more effective than simple Jean in order to make slim body shape. Third, Appropriate position of horizontal lines can be effective to make long body shape. Fourth, Top stitch, pin-tuck and pleats can be applied to vertical or horizontal lines instead of cutting lines.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1449-1457
• /
• 1996

In this paper, the unsteady two dimensional model for the thermal stratification in the pressurizer surge line of PWR plant has been proposed to numerically investigate the heat transfer and flow characteristics. The dimensionless governing equations are solved by using the Control Volume Formulation and SIMPLE (Semi-Implicit Method for Pressure Linked Equations) algorithm. The temperature profile of fluids and pipe wall with time are shown when the thermal stratification occurs in the horizontal pipe. The numerical result shows that the maximum dimensionless temperature difference is about O.514 between hot and cold section of pipe wall at dimensionless time 1,632.