• 제목/요약/키워드: horizontal distribution

검색결과 1,180건 처리시간 0.031초

The Characteristics of Two-Phase Flow Distribution in a Bottom Dividing Header

  • Im, Yang-Bin;Kim, Jang-Soo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권8호
    • /
    • pp.1195-1202
    • /
    • 2004
  • In this paper an experimental study was investigated for two-phase flow distribution in compact heat exchanger header. A test section was consisted of the horizontal bottom dividing header($\phi$: 5 mm, L: 80 mm) and 10 upward circular mini channels ($\phi$: 1.5 mm, L: 850 mm) using an acrylic tube. Three different types of tube intrusion depth were tested for the mass flux and inlet mass quality ranges of 50 - 200 kg/$m^2$s and 0.1 - 0.3, respectively. Air and water were used as the test fluids. The distribution of vapor and liquid is obtained by measurement of the total mass flow rate and the calculation of the quality. Two-phase flow pattern was observed, and pressure drop of each channel was measured. By adjusting the intrusion depth of each channel an uniform liquid flow distribution through the each channel was able to solve the mal-distribution problem.

쌍동형 부유식 소파제의 소파성능에 관한 연구 (A Study on the Performance of Twin Hull Floating Breakwater)

  • 박노식;엄병섭
    • 한국해양공학회지
    • /
    • 제12권1호
    • /
    • pp.128-134
    • /
    • 1998
  • This study is carried out the theoretical studies on wave transmission and motions in waves of twin hull type floating breakwaters with the vertical and horizontal plate. The method of calculation is based on the three dimensional singularity distribution method. The results show that wave transmission is affected by heave motion. Twin hull type is designed by the use of the theoretical method and good performance of the developed floating breakwater is confirmed for longer wave period.

  • PDF

Disturbance due to internal heat source in thermoelastic solid using dual phase lag model

  • Ailawalia, Praveen;Singla, Amit
    • Structural Engineering and Mechanics
    • /
    • 제56권3호
    • /
    • pp.341-354
    • /
    • 2015
  • The dual-phase lag heat transfer model is employed to study the problem of isotropic generalized thermoelastic medium with internal heat source. The normal mode analysis is used to obtain the exact expressions for displacement components, force stress and temperature distribution. The variations of the considered variables through the horizontal distance are illustrated graphically. The results are discussed and depicted graphically.

수영만의 생태계모델링에 의한 물질분포 (The Material Distribution by the Ecosystem Modeling in Suyoung Bay)

  • 김동선;조규대
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.817-825
    • /
    • 1998
  • A three-dimensional ecosystem model is applied to the Suyoung Bay, located at the southeastern part of Korea, to study of the material distribution in the time scale of several tens days. The model has included of the DIN(Dissolved Inorganic Nitrogen), DIP(Dissolved Inorganic Phosphate), phytoplankton, zooplankton and detritus, and also was coupled with the physical processes. The spatial distribution of chlorophyll-a and primary productivity in the model is determined by the physical and chemical-biological parameters. The horizontal distributions of the DIN, DIP and chlorophyll-a are decreased from the coast to the off-shore, though the nutrients show some more complicated pattern than the chlorophyll-a. The nutrient contents in the off-shore are low, and thus a relatively low productivity(chlorophyll-a) are presented. On the whole, the distribution of the results of model are smoother than the observed ones and some small scale variation in the observed data cannot be reproduced by the model due to the resolution limits of model. However, the basic pattern and the quantitavities has been reproduced by the model well.

  • PDF

대공간의 실내온열환경 실측 및 분석 (The Field Measurement and Analysis of Indoor Thermal Environment in Large Enclosures)

  • 채문병;양정훈;최동호;석호태
    • 한국공간구조학회논문집
    • /
    • 제8권1호
    • /
    • pp.77-88
    • /
    • 2008
  • 본 연구에서는 대공간을 동계 및 하계로 구분하여 실내온열환경의 변화를 실측하고 냉 난방조건과 관련하여 대공간에서 형성되는 실내온열환경의 특성을 파악하는 것을 목적으로 하여, 대공간의 수직 및 수평온도분포, 객석온도분포, 실내표면온도분포, 실내온열쾌적성 등의 실내온열환경을 검토하였다.

  • PDF

철골에 의한 지자기 교란 (Geomagnetic Disturbances by Steel Skeletons)

  • 송승한;이문호;배성호;신현진
    • 한국자기학회지
    • /
    • 제11권1호
    • /
    • pp.32-37
    • /
    • 2001
  • 건축물내 바닥면에서의 지자기장 분포에 대한 모사실험과 측정을 통하여 철골이 지자기의 분포에 미치는 영향을 연구하였다. 지자기 분포에 대한 모사시험은 유한요소법으로 수행하였으며, 바닥면에서 지자기장의 수직분력(Z)은 플럭스 게이트형 마그네토미터로 측정하였다. 수평으로 배열된 철골은 지자기장의 Z성분 분포에 미치는 영향이 비교적 적으나, 수직으로 배열된 철골은 토의 분포에 강한 영향을 주어 국소 지자기 교란을 일으킨다. 이러한 국소 지자기 교란은 연자성체로 이루어진 바닥이나 우회로 구조를 가지는 연자성체 바닥으로 완화된다.

  • PDF

FIBRED RIEMANNIAN SPACE WITH KENMOTSU STRUCTURE

  • Kim, Byung-Hak
    • Journal of applied mathematics & informatics
    • /
    • 제6권3호
    • /
    • pp.921-928
    • /
    • 1999
  • K. Kenmotsu introduced and studied the so-called Kenmotsu manifold related to the warped product space. In this paper we charac-terize a Kenmotsu Manifold using the fibred Riemannian space.

3차원 주동변위에 따른 인접지반으로의 하중전이 (Load Transfer to the Adjacent Ground Induced by the 3-Dimensional Active Displacement)

  • 박병석;이상덕
    • 한국지반공학회논문집
    • /
    • 제31권10호
    • /
    • pp.49-60
    • /
    • 2015
  • 기존 3차원 토압연구는 벽체에 작용하는 주동토압을 단일파괴체로 가정하고 벽체의 안정성에 초점을 맞춰 3차원 토압의 크기를 구하는데 역점을 두었고, 토압의 주변지반 전이에 대한 연구는 미진하였다. 따라서 본 연구에서는 벽체의 폭과 높이의 비 즉, 종횡비를 달리하여 3차원 모형실험을 수행하고, 주변지반으로 전이되는 토압의 크기와 영향범위를 파악하였다. 주변지반으로 전이되는 토압은 종횡비에 따라 3차원 주동토압의 감소량보다 17.9~30.6% 작게 나타났으며, 연직방향 토압의 전이보다 수평방향 토압의 전이가 크게 나타났다. 토압의 전이범위는 수평방향으로 주동벽체 폭 w 기준으로 0.67~1.29w, 연직방향으로 주동벽체 높이 ${\Delta}h$기준으로 약 1.0~3.0h인 것으로 나타났다. 수평방향으로 전이되는 토압은 종횡비가 같을 때 수평방향 모두 동일한 높이에서 최대치를 나타내며, 종횡비가 증가함에 따라 토압의 최대 전이 지점이 벽체 하부에서 상부로 변화하였다. 수평방향 토압의 전이는 주동벽체 폭 w 기준으로 0.25w에서 56%~79%인 것으로 나타났으며, 연직방향 토압의 전이는 주동벽체 ${\Delta}h$기준으로 1.0~1.5h에서 50%~58%인 것으로 나타났다. 종횡비에 따라 전이되는 토압의 크기와 영향범위를 분석하고 주동변위 벽체 주변으로 전달되는 3차원 하중전이 분포도를 제시하였다.

LIF를 이용한 Hg-Ar(1Torr)의 플라즈마 밀도 측정 (Plasma Density Measurement of the Hg-Ar(1Torr) by LIF Method)

  • 이종찬;박대희;양종경
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권5호
    • /
    • pp.213-217
    • /
    • 2005
  • In this paper, we introduced a LIF measurement method and summarized the theoretical side. When an altered wavelength of laser and electric power, lamp applied electric power, we measured the relative density of the metastable state in mercury after observing a laser induced fluorescence signal of 404.8nm and 546.2nm, and confirmed the horizontal distribution of plasma density in the discharge lamp. Due to this generation, the extinction of atoms in a metastable state occurred through collision, ionization, and excitation between plasma particles. The density and distribution of the metastable state depended on the energy and density of plasma particles, intensely This highlights the importance of measuring density distribution in plasma electric discharge mechanism study The results confirmed the resonance phenomenon regarding the energy level of atoms along a wavelength change, and also confirmed that the largest fluorescent signal in 436nm, and that the density of atoms in 546.2nm ($6^3S_1 {\to} 6^3P_2$ ) were larger than 404.8nm ($6^3S_1 {\to} 6^3P_1$). According to the increase of lamp applied electric power, plasma density increased, too. When increased with laser electric power, the LIF signal reached a saturation state in more than 2.6mJ. When partial plasma density distribution along a horizontal axis was measured using the laser induced fluorescence method, the density decreased by recombination away from the center.