• 한국안전학회지
• /
• 제30권2호
• /
• pp.48-55
• /
• 2015

The number of collapse accidents relevant to form support since 2003 is 30 on the basis of statistical data from Ministry of Employment and Labor,. Total number of casualty was 138 (47 for deaths and 91 for injuries). The accident severity rate was high because the 4.6 casualties per one accident were occurred averagely although the incident rate was relatively low. Especially, one of form support members, the pipe supports have not been equipped adequately so that the accidents could have happened. In this regard, this study performed buckling test related to the effect of horizontal connection and slope in the single pipe which is one of typical pipe supports. The buckling load, which was estimated from the single pipe with the horizontal connectors theoretically and experimentally, was increased as more than 2 times compared to the buckling load obtained from the pipe supports without the connector. The buckling load was reduced as more than 26%, 34% slope of the single pipe comparing with 5% and 10% slope, respectively. Thus, the purpose of this study is to provide the guideline for installation and the maintenance of the pipe supports legally and institutionally to prevent the collapse accidents of the pipe supports.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.155-162
• /
• 2019

Hybrid precast concrete panel is a wall element that is able to quickly construct the core wall structure for moderate-rise modular buildings. Hybrid precast concrete panel has unique characteristics which is a pair of C-shaped steel beams combined at the top and bottom of a concrete wall, In this study, an improved anchorage detail for vertical rebar is proposed to ensure the lateral force resistance performance of hybrid precast concrete panel emulating monolithic concrete wall. Also, the structural performance of horizontal connection is investigated experimentally with the bolt spacing parameter. And the behavior of hybrid precast concrete panel with the improved detail is compared with the monolithic concrete wall tested in a previous study. Finally, the required thickness of C-shaped steel beam to eliminate or minimize the deformation in horizontal connection is calculated by prying action equation.

• 호남수학학술지
• /
• 제34권4호
• /
• pp.513-517
• /
• 2012

Let L(M) be the bundle of all linear frames over a smooth manifold M, $u$ an arbitrarily given point of L(M), and ${\nabla}:\mathfrak{X}(M){\times}\mathfrak{X}(M){\rightarrow}\mathfrak{X}(M)$ a linear connection on M. Then the following result is well known: the horizontal subspace at the point $u$ may be written in terms of local coordinates of $u{\in}L(M)$ and Christoel's symbols defined by ${\nabla}$. This result is very fundamental on the study of the theory of connections. In this paper we show that the local expression of the horizontal subspace at the point u does not depend on the choice of a local coordinate system around the point $u{\in}L(M)$, which is rarely seen.

• 충청수학회지
• /
• 제25권4호
• /
• pp.731-738
• /
• 2012

Let L(M) be the bundle of all linear frames over $M,\;u$ an arbitrarily given point of L(M), and ${\nabla}\;:\;\mathfrak{X}(M)\;{\times}\;\mathfrak{X}(M)\;\rightarrow\;\mathfrak{X}(M)$ a linear connection on L(M). Then the following results are well known: the horizontal subspace and the connection form at the point $u$ may be written in terms of local coordinates of $u\;{\epsilon}\;L(M)$ and Christoffel's symbols defined by $\nabla$. These results are very fundamental on the study of the theory of connections. In this paper we show that the local expressions of those at the point $u$ do not depend on the choice of a local coordinate system around the point $u\;{\epsilon}\;L(M)$, which is rarely seen. Moreover we give full explanations for the following fact: the covariant derivative on M which is defined by the parallelism on L(M), determined from the connection form above, coincides with $\nabla$.

• 한국통신학회논문지
• /
• 제22권11호
• /
• pp.2531-2542
• /
• 1997

This paper describes a method for region segmentation and string extractionin documents which are mixed with text, graphic and picture images by the use of the structural characteristic of connceted components. In segmentation of non-text regionas, with connection-characteristic functions which are made by structural characteristic of connected components, segmentation process is progressed. In the string extraction, first we organize basic-unit-region of which vertical and horizontal length are 1/4 of average length of connection components. Second, by merging the basic-unit-regions one other that have smaller values than a given connection intensity threshold. Third, by linking the word blocks with similar block anagles, initial strings are cresed. Finally the whold strings are generated by merging remaining word blocks whose angles are not decided, if their height and prosition are similar to the initial strings. This method can extract strings that are neither horizontal nor of various character sizes. Through computer exteriments with different style documents, we have shown that the feasibility of our method successes.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.517-526
• /
• 2023

현장에서 재사용율이 높은 시스템 동바리를 대상으로 임의 설계와 과도한 가재새 보강을 지양하고자 성능평가를 근거로한 시스템 동바리의 수직재와 수평재의 연결부에 대한 연결 조건을 제시하고자 하였다. 이를 위하여 국내에 가설현장에 널리 사용되는 대표적인 연결재 유형인 디스크형과 포켓형을 대상을 하중방향(수직, 수평)과 가력방법(단조, 반복)에 대하여 회전강성을 평가하였다. 평가결과 현행 설계기준에서 연결재에 대하여 회전강성을 "0"으로 규정한 것과 달리 모든 시편에서 회전강성 값을 확인할 수 있었으며, 최대 회전강성은 디스크형 연결재를 사용하여 수직방향으로 반복 가력한 시편에서 회전강성값이 19.624 kNm/rad로 확인되었다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.641-652
• /
• 2004

철골 기둥-보 강축 접합부에 대한 연구는 그 동안 국내외에서 오랜 기간 연구가 진행되어 내진성능 및 접합부의 강도를 개선시킬 수 있는 많은 접합 형식이 개발되어 사용 중에 있으나, 약축 접합 형식에 대한 연구는 거의 없는 실정이다. 또한 현재 국내에서는 시공성을 고려하여 기존의 브라켓형식 용접 접합부를 선호하고 있으나, 용접량이 많아 취성적인 거동이 우려되며 과대 설계된 경향이 있다. 본 연구의 실험 결과에서 기존 브라켓 형식 용접접합은 용접량이 과도한 것으로 나타났으며, 기둥 웨브와 보의 웨브의 용접은 불필요한 것으로 판단된다. 그리고 본 연구에서 제안한 새로운 기둥-보 약축 접합형식들에 대한 실험 결과에서 기존 브라켓형식 용접접합보다 우수한 내력 및 연성을 보유하여 구조적으로 안전함을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1633-1638
• /
• 2003

In case that in-leakage through the valve disk occurs, a numerical study is performed to estimate on thermal stratification phenomenon in the Safety Injection piping connected with the Reactor Coolant System piping of Nuclear Power Plant. As the leakage flow rate increases, the temperature difference between top and bottom of horizontal piping has the inflection point. In the connection point of valve and piping, the maximum temperature difference between top and bottom was 185K and occurred in the condition of 10 times of standard leakage flow rate. In the connection point of elbow and horizontal piping, the maximum temperature difference was 145K and occurred in the condition of 15 times of standard leakage flow rate. In the vertical piping of Safety Injection piping, the near of connection point between elbow and vertical piping showed the outstanding thermal stratification phenomenon in comparison with another region because of turbulent penetration from Reactor Coolant System piping. In order to prevent damage of piping due to the thermal stratification when in-leakage through the valve disk occurs, the connection points between valve and piping, and the connection points between elbow and piping need to be inspected continually.

• Structural Engineering and Mechanics
• /
• 제85권3호
• /
• pp.407-417
• /
• 2023

Precast assembled bridge piers with hybrid connection (PASP) use both tendons and socket connections. To study the seismic performance of PASP, a full-scale in-situ test was performed based on an actual bridge project. The elastic-plastic fiber model of PASP was established using finite element software, and numerical analyses were performed to study the influence of prestress degree and socket depth on the PASP seismic performance. The results show that the typical failure mode of PASP under horizontal load is bending failure dominated by concrete cracking at the joint between the column and cushion cap. The cracking of the pier concrete and opening of joints depend on the prestress degree and socket depth. The prestressing tendons and socket connection can provide enough ductility, strength, restoration capability, and bending strength under small horizontal displacements. Although the bearing capacity and post yield stiffness of the pier can be improved to some extent by increasing the prestressing force, ductility is reduced, and residual deformation is increased. Overall, there are reasonable minimum socket depths to ensure the reliability of the socket connection.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.53-61
• /
• 2019

This study performs reliability analysis of three-dimensional temporary shoring structures with three different models. The first model represents a field model which does not have diagonal bracing members. The installation of bracing members is often neglected in the field for convenience. The second model corresponds to a design model which has the bracing members with the hinge connection of horizontal and bracing members at joints. The third model is similar to the second model but the hinge connection is replaced with partial rotational stiffness. The reliability analysis results revealed that the vertical members of the three models are safe enough in terms of axial force, but the vertical and horizontal members exhibit a big difference among the three models in terms of combination stress of axial force and bi-axial bending moments. The field model showed significant increase in failure probability for the horizontal member, and thus the results demonstrate that the bracing member should be installed necessarily for the safety of the temporary shoring structures.