• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.101-105
• /
• 2000

The crystallization behavior of homo polypropylene (PP) and PP in the PP-poly($\varepsilon$-caprolactone) (PCL) blends during isothermal crystallization has been investigated using differential scanning calorimeter (DSC) and advanced rheometric expansion system (ARES). From the storage modulus data of the homo PP and PP-PCL blends during isothermal crystallization, the volume fraction of crystallized material ($X_t$) of the homo PP and PP in the PP-PCL blends was calculated using the various rheological models. The results of $X_t$ of the homo PP and PP in the PP-PCL blends from ARES measurement were compared with the results from DSC. The $X_t$ of the homo PP was found to be higher in the ARES measurement than in the DSC. The crystallization rate of the homo PP was found to be faster in the rheological measurements than in the thermal analysis. The $X_t$ of PP in the PP-PCL blends with various compositions was obtained from the thermal analysis and rheological measurements. The $X_t$ of PP in the PP-PCL blends obtained from the thermal analysis and rheological measurements are not consistent. This discrepancy of $X_t$ may be due to the morphological changes resulted from the different crystallization kinetics of PP in the PP-PCL blends.

• Journal of Adhesion and Interface
• /
• v.14 no.4
• /
• pp.192-196
• /
• 2013

In this study, a series of bi-axially oriented films based on homo polypropylene (PP) and hydrocarbon resin (HCR) modified PP were prepared to investigate their mechanical properties, optical properties, permeability to gases and water vapors and shrinkage ratio. Hydrogenated dicyclopentadiene (DCPD) resin and hydrogenated C9 resin were used as HCR in this study. Bi-axially oriented polypropylene (BOPP) films made with PP/HCR blends showed better mechanical properties (higher Young's modulus), better optical properties (lower haze), lower permeability to gases and water vapors and increased shrinkage ratio than BOPP films made with homo-PP. Hydrogenated DCPD resin and hydrogenated C9 resin showed similar contribution to the improvement in mechanical properties and optical properties of BOPP films, but there are a differences in permeability to gases and water vapors and shrinkage ratio.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.121-130
• /
• 2016

In an attempt to reach a balance of performances in homo-polypropylene based system, the effects of single and hybrid reinforcements inclusions comprising calcium carbonate nanoparticles (2, 4 and 6 phc) and glass fibers (10 wt.%) on the mechanical and thermal properties were investigated. Different samples were prepared by employing twin-screw extruder and injection molding machine. In morphological studies, the uniform distribution of glass fibers in PP matrix, relative adhesion between glass fibers and polymer, and existence of nanoparticles in polymer matrix were observed. $PP/CaCO_3$ (6 phc) as compared to pure PP and PP/GF had superior tensile and flexural strengths, impact resistance and deformation temperature under load (DTUL). $PP/GF/CaCO_3$ (6 phc) composite displayed comparable tensile and flexural strengths and impact resistance to neat PP, while its tensile and flexural moduli and deformation temperature under load (DTUL) were 436%, 99% and $26^{\circ}C$greater respectively. The maximum impact resistance was observed in $PP/CaCO_3$(6 phc). The highest DTUL was perceived in PP hybrid nanocomposite containing 10 wt.% glass fiber and 4 phc $CaCO_3$ nanoparticle.

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.147-156
• /
• 1994

폴리프로필렌 이산화티타늄 첨가 폴리프로필렌을 심초형 복합 방사하여 첨가제를 섬유의 중심부분, 또 표면부분에 차별분포시켰다. TiO2의 함량이 증가함에 따라 점도(η)와 저장탄성계수(G＇)는 증가하였다. 전자현미경으로 파단면의 모폴로지를 관찰한 결과 TiO2와 함량이 증가함에 따라 감소하는 경향을 보였다. TiO2의 함량 증가에 따라 강력, 절단신도, 그리고 탄성계수는 감소하였다. 복합방사한 섬유의 TiO2 함량이 2% 미만일 때는 homo PP 보다 강력이 좋아졌다. 복합 섬유의 탄성계수는 중심부에 homo PP가 분포한 경우가 더 컸 고 강력과절단 신도는 중심부에 filled PP가 분포한 경우가 더 컸다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.1 no.2
• /
• pp.74-81
• /
• 1987

The reduction in dielectric strength of insulating polymer material when applying electric field is known to be substantial due to the trapped carrier effect. In this study, the carrier property of Biaxially-Drawn polypropylene, which has superior heat-resistance compared to ordinary one, is examined to improve electrical characteristics by measuring TSC spectra as a function of electric field applied to a sample of ($50{\mu}m$) thickness film. The TSC spectra in the temperature range of 303-413(K) and electric field of 2-80(MV/m) have shown no observable effect below 12(MV 1m) but TSC currents of Hetero-and Homo-peaks formed from trapped space charger and space charger injected from electrode have been observed above that point, which seems eventually lead to dielectric breakdown. Finally, this study has shown the superior dielectric proporty of Biaxially-Drawn polypropylene film compared to the non-oriented one for electrical insulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.9-13
• /
• 2014

Glass fiber reinforced thermoplastics(GFRTP) is made by adding chemical additive to glass fabric which is strong at a high temperate, incorrodible, and good at intensity and specific gravity. Although we focused on the weight lightening, the intensity of GFRTP is also important. To remedy thermoplastic resin's inferior property of matter to thermo-hardening resin, we formed several specimen, differing the chemical additive as Homo PP, MAPP 3%, Rubber 5%, and mixed. We put pressure of 5 type on the specimens. The analyses result for the different pressure, the resin spreads evenly, then the coherence is increased. Eventually, the mechanical properties are changed. When high intensity is needed, it is good idea to use polypropylene(PP) which has good coherence with glass fabric as chemical additive. We can get better intensity when we form the resin at the optimum pressure depending on mixing of chemical additive and glass fabric than when we increase the pressure.