• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.357-364
• /
• 2004

Government is supporting development of home networking. But, this new system is much expensive to introduce in the home. And limit for establishment is so many in the home. Therefore, in this paper, Present direction of home automation system that can have high effciency into low expense, induction of automation system is easied in the home. Also, install can be easy and do remote control in PC, HP, PDA because use RF, DB.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.11-17
• /
• 2006

Recently, IT industry by digital technique is improved gradually. Therefore many electronic appliance became the digital, and this is magnified gradually. The development of embedded home automation system combined embedded and internet technique is taking many interest. Specially in the times of the ubiquitous, excellent economically home automation system is preferred even in general family. Therefore, in this paper, we escape from monotonic control of home automation and draw a plan intelligent home automation to be developed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.695-698
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other hone network via Internet through IGD DCP with control commands of UPnP.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.354-365
• /
• 2015

This work presents an Internet of Things (IoT) system for home energy management based on a custom-designed Impulse Radio Ultra-Wideband (IR-UWB) transceiver that targets a generic and multi-standard control system. This control system enables the interoperability of heterogeneous devices: it integrates various sensor nodes based on ZigBee, EnOcean and UWB in the same middleware by utilizing an ad-hoc layer as an interface between the hardware and software. The paper presents as a first the design of the IR-UWB transceiver for a portable sensor node integrated with the middleware layer, and also describes the receiver connected to the control system. The custom-designed low-power transmitter on the sensor node is fabricated with 130 nm CMOS technology. It generates a signal with a 1.1 ns pulse width while consuming $39{\mu}W$ at 1 Mbps. The UWB sensor node with a temperature measurement capability consumes 5.31 mW, which is lower than the power level of state-of-the-art solutions for smart-home applications. The UWB hardware and software layers necessary to interface with the control system are verified in over-the-air measurements in an actual office environment. With the implementation of the presented sensor node and its integration in the energy management system, we demonstrate achievement of the broad flexibility demanded for IoT.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.219-226
• /
• 2016

In this paper, adaptive home power peak-cut control system is developed using PLC. The developed scheme provides monitoring of power usage, power peak-cut control and additional function. In test bed, zone is presented by bedroom, living room, kitchen and bathroom. And individual load is presented by lighting, heater and fan in zone. In developed scheme, zone control is implemented by single PLC modem. And individual load control is implemented by key-map table. In addition, power peak-cut control system S/W, which can perform setting of power peak, power peak-cut control and monitoring of power usage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.124-130
• /
• 2011

In this paper, we propose a method for the efficient power use in power outage. The cost is high and conversion into the other function is difficult since the terminal used in conventional home network system has a dedicated function. This method is based on home network system employed with photovoltaic system. Throughout the modularization of the terminal, the variable function and cost reduction can be achieved. Additionally the unit cost can be reduced by using the power line communication. The prototype of light-control terminal has been implemented. The experimental results with the terminal show the performance of light-control system and the possibility of the commercialization can be achieved.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.537-544
• /
• 2007

A home network is a residential local area network in which digital home appliances are connected with each other. Applying the mobile agent technology to the home network is expected to provide a new computing model. In particular, mobility and asynchronous ability of mobile agent can be used to reduce network traffic generated for managing home appliances. However, in order to apply the mobile agent concept to the home network, access control for mobile agents is necessary. In the existing home network system, there is one special server, sometimes called home server This server generally has mapping tables to be updated periodically, which describes access control lists between users' authorities and corresponding devices. In this paper, we propose a role-based access control framework with mobile agents in home networks. This framework, called Secure KAgent framework, is designed and implemented based on KAgent system. It has two main characteristics: to control access permissions based on Role-Based Access Control(RBAC) scheme and to safety assign roles to mobile agents by role tickets.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.59-64
• /
• 2006

This paper describes UPnP AV System which provides various multimedia services in home network composed of diverse multimedia devices. It is difficult to build home network where various multimedia services can be provided because there are a lot of difference devices, platforms, and network technologies. However, UPnP middleware can make up multimedia service environment in that home network. Therefore this paper describes how the multimedia service environment is built with UPnP middleware. We analyze and modify MediaServer, MediaRenderer, and Control Point, which these are the components of UPnP AV archtecture. Additionally we provide some efficient GUI to use different kind of multimedia in any place of home networks. We propose UPnP AV Framework of playback module that consist of MediaServer providing contents, MediaRenderer using contents, and Control Point providing GUI. Especially, MediaRenderer and Control Point are integrated in set-top.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.737-740
• /
• 2006

Home network system provides users with various kinds of services such as home device control, entertainment, local information service and etc. There are a lot of on-going researches and developments on home service environment regardless of time and space via convenient home devices. So, in this paper, we guide the specific model for real-time access control to various services and propose the extensible security policy model.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.26-32
• /
• 2001