• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.66-71
• /
• 2011

The flexural strength of $MoSi_2$ based composites reinforced with Nb sheets has been investigated, based on the detailed examination of their microstructure and fractured surface. Both sintered density and porosity of Nb/$MoSi_2$ composites were also examined. Nb/$MoSi_2$ composites were fabricated by different conditions such as temperature, applied pressure and its holding time, using a hot-press device. The volume fraction of Nb sheet in this composite system was fixed as 10%. The characterization of Nb/$MoSi_2$ composites were investigated by means of optical microscopy, scanning electron microscope and three point bending test. Nb/$MoSi_2$ composites represented a dense morphology at the interfacial region, accompanying the creation of two types of reaction layer by the chemical reaction of Nb and $MoSi_2$. Nb/$MoSi_2$ composites possessed an excellent density at the fabricating temperature of $1350^{\circ}C$, corresponded to about 95% of theoretical density. The flexural strength of Nb/$MoSi_2$ romposites were greatly affected by the pressure holding time at the same fabricating temperature, owing to the large suppression of porosity in the microstructure. Especially, Nb/$MoSi_2$ composites represented a good flexural strength of about 310 MPa at the fabricating condition of $1350^{\circ}C$, 30MPa and 60min, accompanying the pseudo-ductile fracture behavior by the deformation of Nb sheet and the interfacial delamination.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.23 no.1
• /
• pp.153-178
• /
• 2012

This study covers the basic information of the small libraries nationwide, holding materials, facilities/equipment, human resources, budget, usage/users, and service etc. The survey is divided into 4 steps to produce accurate statistical data and analyze it. As a result, total 3,349 small libraries meet the criteria of the Library Act in 2010. Their holding materials, facilities/equipment, human resources, budget, usage, service program are lack of providing the knowledge information and reading culture service, which is defined in the Library Act. In particular, the majority of small libraries(80%) are in poor condition to operate library facilities/equipment, budget, and their operation. This study proposes some suggestions to overcome the poor condition and to make small libraries prosperous in the near future.

• Journal of Animal Science and Technology
• /
• v.58 no.7
• /
• pp.27.1-27.8
• /
• 2016

Background: Studies on prevalence of pale, soft, exudative (PSE) condition in Sri Lankan poultry industry is minimal. Hence, the objective of present study was to determine the incidence of PSE chicken meat in a commercial meat processing plant and to find out its consequences on meat quality traits of roasted chicken breast. Method: A total of 60 breast fillets were randomly selected, evaluated based on color L* value, and placed into 1 of 2 categories; PSE (L* > 58) or normal meat ($L*{\leq}58$). A total of 20 breast fillets (10 PSE and 10 normal) were then analyzed for color, pH, and water holding capacity (WHC). After processing those into roasted chicken breast, cooking loss, color, pH, WHC, and texture values were evaluated. A sensory evaluation was conducted using 30 untrained panelists. Results: The incidence of PSE meat was 70 % in the present experiment. PSE fillets were significantly lighter and had lower pH values compared with normal fillets. Correlation between the lightness and pH was negative (P < 0.05). Although there was no significant difference in color, texture, and WHC values between the 2 groups after processing into roasted chicken breast (P > 0.05), an approximately 3 % higher cooking loss was observed in PSE group compared to its counterpart (P < 0.05). Moreover, cooking loss and lightness values showed a significant positive correlation. Nevertheless, there were no significant differences in sensory parameters between the 2 products (P > 0.05). Conclusions: These results indicated that an economical loss can be expected due to the significantly higher cooking loss observed in roasted breast processed from PSE meat.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2006

Thermoplastic elastomer(TPE) has many advantages such as high flexibility, high elasticity and high elongation, etc. TPE is easily molded as plastic materials, therefore, many TPE parts are applied as home appliances and mechanical parts. However, its mechanical properties would be changed by injection molding conditions such as melt temperature, mold temperature, injection pressure and holding pressure, etc. In this study, the influences of the injection molding condition on the mechanical properties as tensile strength, hardness of thermoplastic vulcanizates(TPVs), which is one of the TPE, were investigated. By the injection molding experiment, the molding's tensile strength and hardness was influenced on the melt temperature and composition ratio of PP and EPDM. The morphology of moldings were shown by the scanning electron microscope.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.50-56
• /
• 2005

The mechanical properties of glass fiber reinforced polymer reinforcing bars(rebar) in various environment conditions such as moisture, chloride, alkali and freeze-thaw actions at temperature ranging from room temperature($25^{\circ}C$) to high temperature of up to $80^{\circ}C$ have been studied. The test results indicated that tensile strength and interfacial shear strength of GFRP bar were decreased with the increasing of temperature and holding time of each environment condition. The degradation in alkali environment. was more serious than those in the other environments.

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.153-167
• /
• 2004

This study focuses on building the wartime air operation model to evaluate the airfield capability. There are some uncertainties in the process of air operation such as mission flying time, turn around time, mission damage or kill rate, weather condition, and so on. Airplanes, on the way to the airbase after completing mission flight, may have been in queue on the holding point due to the unusable condition of airfield. And then, they may sometimes need to go other airbases due to the shortage of fuel. Under those uncertainties, this model is to evaluate the airfield capability in the wartime air operation using simulation.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.209-217
• /
• 2000

In this paper, we consider an Inventory system with multi-suppliers. A supply agreement is made with one of the suppliers, to deliver a fixed quantity Q evry review period ； That is, adapting to discounts of under the condition of free addition often implies that the timing and sizes of future replenishment orders are less predetermined. The replenishment decisions for the other supplier are governed by a replenishment policy. This paper, multiple suppliers strategy is a combination of a push system (the main supplier delivers every review period a predetermined quantity Q) and a pull system the replenishment orders placed at other suppliers are governed by replenishment policy. The costs are defined as the sum of the ordering, holding, purchasing and opportunity costs. Based on numerical results, conclusions follow about the division of the replenishment volume among the inventory policy.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.477-483
• /
• 2002

This paper deals with a workspace analysis of multi-legged walking robots in velocity domain(velocity workspace analysis). Noting that when robots are holding the same object in multiple cooperating robotic arm system the kinematic structure of the system is basically the same with that of a multi-legged walking robot standing on the ground, we invented a way ot applying the technique for multiple arm system to multi-legged walking robot. An important definition of reaction velocity is made and the bounds of velocities achievable by the moving body with multi-legs is derived from the given bounds on the capabilities of actuators of each legs through Jacobian matrix for given robot configuration. After some assumption of hard-foot-condition is adopted as a contact model between feet of robot and the ground, visualization process for the velocity workspace is proposed. Also, a series of application examples will be presented including continuous walking gaits as well as several different stationary posture of legged walking robots, which validate the usefulness of the proposed technique.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.65-71
• /
• 2000

This study investigated the effect of anticipatory postural adjustment on balance performance in postural disturbance. Any action performed by standing subject is generally accompanied by compensatory postural activities, which reduce or abolish the postural disturbance generated by the movement and keep the subjects' center of gravity within the supporting base. These Postural activities arc triggered by either anticipatory and feedback postural control. We studied the difference of anticipatory and feedback postural control in postural disturbance. The subjects were standing on a foot plate with eyes closed, holding a lead of $5\%$ of their own body weight in their hands. The condition of anticipatory postural adjustment was applied voluntarily releases the a load. The condition of feedback postural control was applied that the load was unpredictably removed. We concluded that anticipatory postural adjustment becomes more efficient to postural performance in postural disturbance.