• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.116-119
• /
• 2000

The advantage of plasma-sprayed coating is their good resistance against thermal shock due to the porous state of the coated layer with a consequently low Youngs modules. However, the existence of many pores with a bimodal distribution and a laminar structure in the coating reduces coating strength and oxidation protection of the base metals. In order to counteract these problems, there have been many efforts to obtain dense coatings by spraying under low pressure or vacuum and by controlling particle size and morphology of the spraying materials. The aim of the present study is to survey the effects of the HIP treatment between 1100 and 130$0^{\circ}C$ on plasma-sprayed oxide coating of A1$_2$O$_3$, A1$_2$O$_3$-SiO$_2$ on the metal substrate (type C18N10T stainless steel). These effects were characterized by phase identification, Vickers hardness measurement, and tensile test before and after HIPing, These results show that high-pressure treatment has an advantage for improving adhesive strength and Vickers hardness of plasma- sprayed coatings.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.653-658
• /
• 1995

Directional effect of applied pressure during sintering on the microstructure and fracture toughness of the heat-treated silicon nitride ceramics has been investigated. The specimens with a composition of 92Si3N4-8Y2O3(in wt%) were sintered at 172$0^{\circ}C$ by a hot press (HP ) and a hot isostatic press (HIP) and heat-treated for grain growth at 1800~20$0^{\circ}C$. The fracture toughness of the HP samples increased with the grain size while the fracture toughness of the HIP treated samples remained the same even though the grain growth occurred. This discrepancy was explained by a bimodal grain size distribution and large aspect ratio of the HPed samples and a monomodal grain size distributjion and samll aspect ratio of the HIP treated samples.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.617-624
• /
• 2000

Abnormal grain growth in alumina was investigated during sinter-HIP process for better understanding of pressure effect on microstructural development. Abnormal grain growth of monolithic alumina was observed near surface region rather than interior region of specimen. Finite element analysis was used to estimate the pressure distribution developed in the specimen. Pressure distribution analysis was in good agreement with grain size distributjion in the specimen. The results of finite element analysis provided that abnormal grain growth monolithic alumina was resulted from the inhomogeneous pressure distribution in the specimen. MgO addition in alumina was effective for the suppression of abnormal grain growth in alumina under inhomogeneous pressure distribution during sinter-HIP process.

• 대한한의학방제학회지
• /
• 제17권2호
• /
• pp.143-150
• /
• 2009

The effects of aqueous extract of Schizandrae Fructus (AESC) on lead (Pb)-induced changes of monoamine neurotransmitters in the hippocampus (HIP) of adult rats were investigated. Male Sprague-Dawley rats were received intraperitoneal (i.p.) administration of Pb acetate (5 mg/kg/d) for 28 days and sacrificed 7 days after the last administration. Concentrations of norepinephrine (NE), dopamine (DA), serotonin (5-HT), 5-hydroxyindole acetic acid (5-HIAA) in HIP were measured by HPLC. There were significant decreases of NE, DA, 5-HT and 5-HIAA in Pb treated rats (P < 0.05), while pretreatment with AESC (100 mg/kg/d or 300 mg/kg/d, p.o., 2 h before Pb) greatly inhibited the decrease of monoamine transmitters, respectively (P < 0.05). Also, AESC (300 mg/kg/d) significantly increased the reduction of glutathione contents and superoxide dismutase activities in HIP induced by chronic Pb. These results suggest that AESC ameliorates Pb-induced depletion of monoamine neurotransmitters in HIP through its antioxidant activity.

• 핵의학기술
• /
• 제16권2호
• /
• pp.35-43
• /
• 2012

CT를 기반으로 감쇠 보정이 시행되는 PET/CT 검사에서는 금속 삽입물에 의한 선속 경화 현상 (Beam Hardening Artifact)으로 인공물이 발생 된다. 이는 인접한 부위의 과대 혹은 과소 평가를 유발하는 감쇠 보정으로 인해 $^{18}F$-FDG의 섭취 변화를 가져오며 영상의 질과 비뇨 생식기 질환의 진단능을 저하시킨다. 따라서 본 연구에서는 PET/CT 영상의 질 향상을 위한 금속 인공물 저감 (Metal Artifact Reduction, MAR) algorithm 재구성방법의 유용성을 평가하고자 한다. 인공 고관절 삽입물에 대한 인공물을 평가하기 위해 SPECT/PET Phantom에 고관절 삽입물을 고정 하여 PET/CT를 진행했다. W/O MAR algorithm 영상과 MAR algorithm 영상에서 CT상에 나타나는 Bright streak, Dark streak, Metal과 Background의 영역에서의 표준화 섭취 계수(Standardized Uptake Value)의 변화를 분석하였다. 또한 본원에 내원한 고관절 전치환술을 시행한 15명의 환자에게서 W/O MAR algorithm과 MAR algorithm, 비 감쇠 보정 영상을 비교 평가하였다. W/O MAR algorithm 영상에서 SUV는 Bright streak 영역에서는 $0.98{\pm}0.48$ g/ml, Dark streak 영역에서는 $0.88{\pm}0.02$ g/ml, Metal 영역에는 $0.24{\pm}0.16$ g/ml, Background 영역은 $0.91{\pm}0.18$ g/ml로 측정되었다. 하지만 MAR algorithm 영상에서는 Bright streak 영역에서는 $0.88{\pm}0.49$ g/ml, Dark streak 영역은 $0.63{\pm}0.21$ g/ml, Metal 영역에서는 $0.06{\pm}0.07$ g/ml, Background는 $0.90{\pm}0.02$ g/ml로 측정되었다. MAR algorithm 적용 시 SUV가 평균적으로 감소 하였으며, W/O MAR algorithm 영상에서는 Bright streak영역에서 Background 보다 높게 측정되어 false positive uptake로 나타났으나 MAR algorithm 영상에서는 Background와 비슷한 농도와 SUV가 나타났고, false positive uptake가 관찰되지 않았다. 따라서 MAR algorithm을 적용하여 인공 고관절 삽입물 주변 조직의 과대 혹은 과소 감쇠 보정으로 인한 섭취의 증가를 줄일 수 있었다. 하지만 Dark streak 영역에서의 SUV 저하를 줄이기 위한 방안은 더욱 많은 연구가 이뤄져야 할 것이다. 고관절 삽입 인공물로 인해 발생하는 Bright streak 영역에서의 false positive uptake를 감소시키고 이와 인접해 있는 비뇨 생식기 질환에 W/O MAR algorithm과 MAR algorithm, 비 감쇠 보정 영상이 동시에 제공된다면 더욱 진단능을 향상 시킬 수 있으리라 생각된다.

• 한국재료학회지
• /
• 제5권6호
• /
• pp.699-705
• /
• 1995

질화규소 요업체에서 입계상의 변화가 파괴인성에 미치는 영향에 대해 살펴보았다 실험에는 Si$_3$N$_4$-Y$_2$O$_3$-SiO$_2$(YS)계와 Si$_3$N$_4$-Y$_2$O$_3$-A1$_2$O$_3$(YA) 계를 사용하였으며, 175$0^{\circ}C$에서 Can/HIP 처리한 후 1800~200$0^{\circ}C$ 온도구간에서 열처리시키면서 입계상의 변화에 따른 파괴인성의 변화를 조사하였다. 열처리 온도구간에서 입계상이 비정질상만으로 존재하였던 YA계의 경우는 열처리 온도가 증가되어 입성장됨에 따라 파괴인성 값이 증가되었으나, 190$0^{\circ}C$ 이상에서 열처리될 때 입계상이 결정상에서 비정질상으로 변화하였던 YS계의 경우는 오히려 파괴인성 값이 급격히 감소되었다. YS계에서 파괴인성의 급격한 저하는 열처리 온도 증가에 따라 입계상이 결정상과 비정질상의 공존 상태에서 비정질상만의 상태로 전이하며 파괴거동에 영향을 미쳤기 때문이라고 생각된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.93-95
• /
• 2004

The present report is the investigation of the effects of the HIP treatment on plasma-sprayed ceramic coating of $Al_2$O$_3$, $Al_2$O$_3$- SiO$_2$ on the metal substrate. These effects were characterized by phase identification, Vickers hardness measurement, and tensile test before and after HIPing.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1261-1265
• /
• 1999

Effect of SiC particle size of the densification of Al2O3-SiC composite during pressureless sintering was investigated. Two types of SiC powders having average particle size of 0.15${\mu}{\textrm}{m}$ and 3${\mu}{\textrm}{m}$ were used. Densification rate of the specimen containing 0.15${\mu}{\textrm}{m}$ SiC particles was slower than that of the specimen containg 3${\mu}{\textrm}{m}$ SiC particles. Although the relative density of the specimen containing 0.15${\mu}{\textrm}{m}$ SiC particles was below 90% of theoretical density after sintering at 155$0^{\circ}C$ the complete closure of open pores occurred. Therefore full densification could be obtained by subsequent HIP. On the other hand in the specimen containing 3${\mu}{\textrm}{m}$ SiC particles the complete closed pore was observed at 95% of theoretical density. Such a fast pore closure in the specimen containing 0.15${\mu}{\textrm}{m}$ SiC particles is likely to occur as a result of dense reaction layer formation on the specimen surface which is attributed to the high reactivity of small size particles with sintering atmosphere.

• 대한영상의학회지
• /
• 제83권6호
• /
• pp.1286-1297
• /
• 2022

목적 고관절 인공치환물을 가진 환자에서 여러 가지 금속인공물 감소 효과를 비교하였다. 대상과 방법 이 연구는 고관절 인공치환술과 이중에너지 전산화단층촬영을 시행한 47명 환자에서 시행하였다. 금속에서 발생한 인공물 감소효과는 서로 다른 3개의 영상(고식적 영상, 금속인공물 감소영상, 가상 단일에너지 영상)에서 비교하였다. 이를 위해 인공관절 주변 7곳에서 금속인공물에 대한 정량적 분석과 정성적 분석을 시행하였다. 결과 금속인공물 감소영상에서 가장 낮은 영상잡음과 인공물 지수를 보였고, 다음으로는 가상 단일에너지 영상이었다. 금속인공물 감소영상은 저음영 인공물이 매우 심한 영역에서만 높은 대조도를 보인 반면, 가상 단일에너지 영상은 인공물 주변 골조직과 그 외 영역에서 높은 대조도를 보였다. 연부조직 분석에서도 금속인공물 감소영상이 더 우수함을 보여 주었다. 정성적 분석에서도 금속인공물 감소영상이 가상 단일에너지 영상보다 인공물 감소 효과가 뛰어남을 밝혔지만, 이차적인 인공물 발생도 가장 흔히 발생하였다. 결론 금속인공물 감소영상이 심한 금속인공물감소에 가장 뛰어난 효과를 보였지만 새로운 이차적 인공물을 발생시켰다. 가상 단일에너지 영상은 인공물 주변 골조직 평가에서 우수함을 보였다.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.357-363
• /
• 2012

The purpose of this study was to investigate the effects of different saddle heights on lower-limb joint angle and muscle activity. Six elite cyclists(age: $32.2{\pm}5.2years$, height: $171.0{\pm}3.5cm$, weight: $79.7{\pm}5.6kg$, cycle career: $13{\pm}6.2years$) participated in three min. submaximal(90 rpm) pedaling tests with the same load and cadence based on saddle heights where subject's saddle height was determined by his knee flexion angle when the pedal crank was at the 6 o'clock position. Joint angles(hip, knee, ankle joints) and the activity of lower limb muscles(biceps femoris(BF), vastus lateralis(VL), tibialis anterior(TA) and gastrocnemius medial(GM)) were compared by measuring 3D motion and electromyography(EMG) data. Results showed that there were significant differences in minimum hip & knee joint angle and range of motion of hip and knee joint between saddle heights. Onset timing and integrated EMG of only BF among 4 muscles were significantly different between saddle heights. Especially there was a negative relationship between minimum hip joint angle and onset timing of BF in most subject, which means that onset timing of BF became fast as the degree of bending of the hip joint became larger by saddle height. Optimal pedaling will be possible through increased amount of muscle activation due to the appropriate burst onset timing by proper pedaling posture with adjusted saddle height.