• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.123-135
• /
• 2021

This study provides basic information for the convenient size selection of T-shirts in an online purchasing environment. The best preferred T-shirts fit was selected among five sizes of T-shirts according to body size group. The subjects were 103 students majoring in clothing. After setting a virtual model with her own body sizes, the subjects chose the best preferred fit among five sizes of T-shirts that included the one suitable to their bust circumference, two smaller T-shirts and two larger T-shirts. As a result, they preferred the fit of larger size T-shirts than body size, but they preferred a different fit by the body characteristic group such as waist height group and hip circumference group. T-shirt length was affected by waist height; in addition, shoulder ease was affected by hip circumference and bust circumference. Therefore waist height and hip circumference should be considerable sizes when consumers choose T-shirts sizes with a preferred fit.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.125-135
• /
• 1996

The purpose of this research is to measure range of virtual hip joint and lower limb joints motion such as the hip, knee and ankle joints for 47 young male students. The results of ANOVA revealed that anthropometric dimensions including weight and stature did not show any significant effects on the range of virtual hip joint and lower limb joints motion and the range of motion with two degrees of freedom at the shoulder, virtual hip and hip joints. Anthropometric dimensions such as age, weight, statuire, arm length, shoulder height and leg length were found to be lowly correlated with the range of virtual hip joint and lower limb joints motion. It is expected that the data on the range of joint motion suggested in this study can be used as a valuable input data when designing workplace, predicting human posture and reach volume, etc.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.311-322
• /
• 2015

Objective : The purpose of this study was to investigate the effects of landing height and knee joint muscle fatigue on the movement of the lower extremity during cutting after landing. Method : Subjects included 29 adults (age: $20.83{\pm}1.56years$, height: $172.42{\pm}9.51cm$, weight: $65.07{\pm}10.18kg$). The subjects were asked to stand on their dominant lower limb on jump stands that were 30 and 40 cm in height and jump from each stand to land with the dominant lower limb on a force plate making a side step cutting move at a $45^{\circ}$ angle with the non-dominant lower limb. The fatigue level at 30% of the knee extension peak torque using an isokinetic dynamometer. Results : The results showed that the difference of landing height increased maximum range of motion and angular velocity of hip, knee, and ankle joints in the sagittal plane, and in the angular velocity of motion of the hip joint in the sagittal plane. The maximum range of motion of the knee joint in the sagittal plane and the frontal plane decreased on landing from both heights after the fatigue exercise. The angular velocity of the hip joint in the sagittal plane, and the maximum range of motion of the hip joint in the transverse plane decreased for both landing heights after the fatigue exercise. The angular velocity of the hip joint in the frontal plane decreased for the 30 cm landing height after the fatigue exercise. On the other hand, the angular velocity and maximum range of motion of the ankle joint in the sagittal plane for both landing heights, and the angular velocity and maximum range of motion of the ankle joint in the frontal plane increased on landing from the 40 cm height after the fatigue exercise. Conclusion : Different landing heights of 30 and 40 cm and 30% fatigue of peak torque of knee extensor found a forefoot and stiff landing strategy, when cutting after landing. These results might be due to decline in the shock absorption capability of the knee joint and the movement capability related to cutting while increasing the contribution of the ankle joint, which may cause increased ankle joint injuries.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.923-934
• /
• 2002

The aim of this study is to suggest a Sizing System which has following points:- 1. In order to satisfy children of diverse figure shapes, we developed sizing system for three different figure type. Figure types are categorized into slim, normal, fat type based on the Rohrer Index. 2. For each figure types, we developed size chart using height bust circumference and hip circumference as basic measurements. The size codes are presented as the height-bust circumference or height-hip circumference. The size interval of height is 5cm for all figure types, such as 120,125,130 ‥‥ we developed a size allocation program, which is helpful when a customer doesn't know exact measurement of some body dimension. If a customer input measurements as much as he/she hows, the program allocates the nearest. At the end of the study, the sizing interaction sites were developed to present the results of the study clear.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.191-197
• /
• 2011

Lifting chair is a typical assistive product to aid for standing up and sitting down for persons with disability. It is particularly useful for the elderly persons whose muscular system is weakened by degenerative joint disease. This paper describes biomechanical assessments of lifting chair with hip-up function. In experiments we measured 3D motion and electromyographic(EMG) signal on the femoral muscle when subject performs the standing motion on the predetermined seat height. Based on assessment of the standing motion, we select the hip-up angle as 15 degrees to cover the relative femoral angle when EMG peak value is appeared. Using an implemented prototype lifting chair with hip-up function we perform standing experiments with five subjects. The experimental results show that the lifting and hip-up functions are effective to assist for standing up motion with less muscle force.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.74-84
• /
• 2013

The purpose of this research is to provide useable data for application in American and Korean apparel company. This data was developed by analyzing information of Korean and American body sizes obtained from "Size USA Project" and "Size Korea Project". The Subjects were 6,306 American females and 1,988 Korean females over 18 years old. 30 measurements and 14 computed values were chosen that were considered critical in making garments. And descriptive analysis, percentile analysis and t-test were used as statistical methods for analyzing measurements and computed value between the two countries. The results were as follows. It was determined that American women were larger and bigger than Korean women in all measurements and computed values, except for Shoulder Slope. Based on BMI values, we determined that American women had a distinct tendency towards being overweight. Through the comparison of drop values (i.e. the difference between Hip and Bust Girths or Hip and Waist Girths), ratio values (i.e. waist height divided by height) and Body Mass Index (BMI) between the two countries, we determined that American women's figures were shapelier than Korean women's. American women had higher hip heights and longer leg lengths for their height compared to Korean woman. Furthermore, the back shapes of Korean women were flatter than American women and BMI values indicated American women were relatively more overweight than Korean women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.143-153
• /
• 2004

The Purpose of this study is provide fundamental data on a suitable sizes of ready-to-wear for women. The subjects of the survey were 300 female of 18 to 24 years old. They were measured direct anthropometry. Height, bust girth, waist girth and hip girth were grouped by KS interval. Data were analyzed by use of Cross Tab method. The results of this study were as follows. Body group of the anthropometric measurements were summed up as follows. Height was divided into 4 section(155-170), bust girth was divided into 7 section(76-94), waist girth was divided into 6 section(61-76) and hip girth was divided into 9 section(84-100). The characteristics of cross tab can be summarized as follows. Section with application ratio are 155-160cm of height, 82-85cm for bust girth, 64-70cm for waist girth and 86-94cm for hip girth. The sizes of high cover ratio of well-fitting jacket, dress, coat and one-piece was 17 sizes, well-fitting an upper garment and the whole body garment item except that was 16 sizes, and a lower garment was 21 sizes.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.311-318
• /
• 2010

This study examined the double piked dismount among the landing techniques of parallel bars based on three-dimensional motion analysis. Four male national gymnasts were the subjects. This study was performed to provide quantitative data highlighting players strengths and weaknesses to enable more stable landing technique. The variables analyzed were the position and velocity of center of gravity(CG) and angles of shoulder joints, hip joints, and trunk. The results are as follows: S1 secured the height of flight with fast vertical rise. After the easy spin in the air, he conducted a stable landing maintaining a proper hip joints angle. S2, S3, and S4, however, began the backward somersault already before leaving the bars, so they moved backward greatly making it more difficult to achieve a higher flight path. As a result, they couldn't control the velocity of their backward movement at landing. For a stable landing, they have to maintain the negative shoulder angle when rising, minimize both antero-posterioror side-to-side movements by doing a strong tap using hip joints, to secure the height of flight before the somersault. Results also show that at the descent, they should conduct rapid spinning by increasing their shoulder and hip joints to the maximum while controlling their velocity.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.308-317
• /
• 2019

This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.

• Journal of Yeungnam Medical Science
• /
• v.37 no.1
• /
• pp.40-46
• /
• 2020

Background: Postoperative pain occurring after hip arthroplasty has become common since the expanded use of cementless femoral stems. The characteristic pain develop in the anterolateral thigh area. This study aimed to predict anterior thigh pain based on the measurements of postoperative anteroposterior (AP) and lateral (Lat) radiographs of the hip joint. Methods: The present study included 26 patients (29 hips) who underwent total hip replacement or bipolar hemiarthroplasty between March 2010 and May 2016, whose complete clinical information was available. AP and Lat radiographs of the affected hip were taken on the day of surgery and 1 and 6 months postoperatively. Patients with improper radiographs were excluded. The distance from the femoral stem to the nearest cortical bone in the distal region of the stem was measured. The patient group with a visual analog scale (VAS) score of ≥6 points was designated as patients with anterior thigh pain. Results: Sex, age, weight, height, body mass index, and bone mineral density in the lumbar spine and femur did not have a significant effect on postoperative VAS scores (p>0.05). Presence of contact between the femoral stem and cortical bone was associated with postoperative anterior thigh pain. Conclusion: Hip AP and Lat radiographs are usually taken to confirm fixation and alignment of the femoral stem after hip arthroplasty. The measurement method introduced in this study can be utilized for predicting anterior thigh pain after hip arthroplasty.