• 국제초고층학회논문집
• /
• 제8권3호
• /
• pp.185-192
• /
• 2019

Citic Tower is the first over-500 m-tall super highrise building in the world, located in the high seismic intensity area with paek ground acceleration over 0.2g in 475 years. This project is unique in its complexity, large volume, and challenging site conditions (zero site for construction). The traditional techniques can hardly meet safty, quality and schedule requirements of the construction. This article introduces the key construction technologies that are innovatively developed and applied in Citic Tower project construction, including intelligent super-high-rise building integrated construction platform system, independently developed by the CCTEB; Jump-Lift Elevator, which is the first of the kind with service height over 500 meters; combined temporary-and-permanent fire protection systems. The BIM technology is also applied in this project. Through technical innovation, and utilization of technologies, construction speed and safety had been greatly improved.

• 국제초고층학회논문집
• /
• 제6권2호
• /
• pp.197-205
• /
• 2017

The conflict between indoor environmental quality and energy consumption has become an unneglectable problem for highrise office buildings, where occupants' productivity is highly affected by their working environment. An effective Façade, therefore, should play the role of an active building skin by adapting to the ever-changing external environment and internal requirements. This paper explores the energy-saving and indoor environment-improving potential of a phase-change material (PCM) integrated Façade. Building performance simulations, combined with parametric study and sensitivity analysis, are adopted in this research. The result quantifies the potential of a PCM-integrated Façade with different configurations and PCM properties, taking as an example a south-oriented typical office room in Shanghai. It is found that a melting temperature of around $22^{\circ}C$ for the PCM layer is optimal. Compared to a conventional Façade, a PCM-integrated Façade effectively reduces total energy use, peak heating/cooling load, and operative temperature fluctuation during the periods of May-July and November-December.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.137-146
• /
• 2007

구조물의 거동에 대한 파사드리거의 보강 효과를 검토하고 파사드리거의 최적위치를 추정할 수 있는 수치해석방법이 제시되었다. 구조물 상부의 수평변위를 최소화할 수 있는 파사드리거의 최적위치는 파사드리거의 구속효과에 의한 수평변위 감소량을 극대화함으로서 구할 수 있으며 가새골조와 파사드리거의 휨강성과 전단강성에 의해 크게 영향을 받는다. 본 연구에서는 3가지 형태의 하중, 즉 등분포하중과 삼각분포하중 그리고 구조물 상단에 작용하는 집중하중이 고려되었다. 파사드리거의 최적위치는 무차원 강성변수 ${\omega}$와 ${\beta}$의 함수로서 표현되었으며, 1개부터 4개의 파사드리거를 갖는 구조물을 대상으로 최적위치에 대한 도표를 작성하였다. 비록 본 연구에서 제시된 해석방법이 몇 가지의 가정을 기초로 유도되었으나 고층건물의 초기설계단계에서 파사드리거의 최적위치 결정을 위한 비교적 정확한 정보를 제공할 수 있다고 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.81-89
• /
• 1991

Recently increasing number of highrise buildings are aseismically designed by dynamic analysis method. To perform comparative study on the results of seismic design by dynamic analysis method, five-to thirty-story building models of ductile moment resisting frames and braced frames are considered. Base shears of these models using the spectrum of equivalent static method in the current Korean code and the ones of dynamic analysis method in the UBC-88 code are compared. Based on this study design spectra to be used in the dynamic analysis in Korea are proposed and the results are compared.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.56-60
• /
• 1989

It is well known that the symmetric buildings have higher resistance than the unaymetric ones do under seismic load. However, it is sometimes inevitable to build an unsymmetric structure due to the site conditions or architectural needs. The unsymmetric building has structural disadvantages under seismic load. In such a case the structural seperation joints are often used to avoid those disadvantages. This paper presents a method to determine the width of the seperation joints for unsymmetric, reinforced concrete apartments structured by walls and slabs only. The variables of the study were the ratio of shear-wall stiffness to the building length in the same directron, the building height and the story mass.

• 국제초고층학회논문집
• /
• 제13권1호
• /
• pp.69-83
• /
• 2024

In this study, we focused on 'Adaptive Reuse', which has the concepts of space reconstitution and social and cultural regeneration, so that previously constructed highrise buildings can accommodate various changes in modern society, and new spatial design was developed based on the characteristics of adaptive reuse. We sought to present the concept and direction, detailed strategies, and architectural response elements of space reconstitution for the purpose of realizing the typical spatial reorganization required by modern society and seeking directions and methods of space reconstitution that can be applied to future society. The purpose is to do so.

• 국제초고층학회논문집
• /
• 제3권3호
• /
• pp.167-171
• /
• 2014

TORANOMON HILLS is the main building of a large-scale re-development project located in the center of Tokyo. This high-rise building has a height of 247 m and 52 floors above ground, 5 floors below ground, and $62m{\times}80m$ in plan. It is used as hotel, residential facilities, offices, shops and conference facilities. The super structure is mainly a rigid steel frame with response-control devices, using concrete-filled steel tube columns. The underground section is a mixed structure composed of steel, steel-reinforced concrete and reinforced concrete framings. The piled-raft foundation type is used. The remarkable feature of this high-rise building is that the motorway runs through the basements of the building, which makes it stand just above the motorway. This condition is an important factor of the building design. The plan shape is designed to fit along the curve of the motorway. Special columns at the corners are required to avoid placing columns in the motorway. This special column is a single inclined column in the lower floors that branches into two columns in the mid-floors to suit the column location in the upper floors. The cast steel joint is used for the branching point of each special column to securely transfer the stress.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.56-63
• /
• 2012

Due to the development of construction technology, there is a considerable increase in the number of skyscrapers in the world. Accordingly, there are rapid growing requests about maintenance systems such as cleaning, painting, and monitoring the processes of facade in highrise buildings. However, it is extremely dangerous working the walls of high-rise buildings, and crashes from buildings have accounted for large proportion of constructional accidents. An alternative solution must be developed with the commercialization of automatic robot systems. For the last decade, interest in developing robots for cleaning and maintenance in facade of highrise buildings has continuously increased. The use of automatic robot systems can be expected to reduce accidents and decrease labor costs. In this paper, we propose a new kind of cleaning mechanism. We have designed and manufactured various cleaning tools for different types of facades with economic commercialization. The cleaning cycle, size, and intensity will be determined by economic constraints as well. The final goals are to design and manufacture tools and robots that can clean facades efficiently and rapidly even in dangerous places. The cleaning tool systems consist of nozzles, brush rollers, and squeezing devices. Furthermore, these tools and robots perform each process utilizing the systems of built-in guide types and gondola types for building maintenance. The performance of the proposed cleaning tools is evaluated experimentally; however additional study should be necessary for safer and more stable commercialization.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.167-176
• /
• 2016

This paper describes a large tuned mass damper (TMD) developed as an effective seismic control device for an existing highrise building. To realize this system, two challenges needed to be overcome. One was how to support a huge mass that has to move in any direction, and the second was how to control mass displacement that reaches up to two meters. A simple pendulum mechanism with strong wires was adopted to solve the first problem. As a solution to the important latter problem, we developed a high-function oil damper with a unique hydraulic circuit. When the mass velocity reaches a certain value, which was predetermined by considering the permissible displacement, the damper automatically and drastically increases its damping coefficient and limits the mass velocity. This velocity limit function can effectively and stably control the mass displacement without any external power. This paper first examines the requirements of the TMD using a simple model and clarifies the constitution of the actual TMD system. Then the seismic upgrading project of an existing high-rise building is outlined, and the developed TMD system and the results of performance tests are described. Finally, control effects for design earthquakes are demonstrated through response analyses and construction progress is introduced.

• 국제초고층학회논문집
• /
• 제4권4호
• /
• pp.291-310
• /
• 2015

It is common for tall buildings in Korea to have a ground response that is highly sensitive to the behavior of the structure. Therefore, the geology of the ground needs to be carefully assessed and considered in the design process to accurately predict the performance of the foundation system. This paper sets out a systematic design approach and ground investigation methodology for the soil conditions frequently encountered in Korea. Various foundation design methods are introduced along with several case studies conducted in Korea.