• 제목/요약/키워드: high-temperature stability

검색결과 1,944건 처리시간 0.029초

초음파와 대두유 용매를 이용한 감 껍질 추출물의 이화학적 특성 (Physicochemical characteristics of carotenoid-enriched extract prepared from persimmon peels by ultrasound-assisted extraction with soybean oil solvent)

  • 정헌식;윤광섭;이수원;문혜경;김종국
    • 한국식품저장유통학회지
    • /
    • 제30권1호
    • /
    • pp.122-131
    • /
    • 2023
  • 초음파와 대두유 용매를 병용하여 감 껍질 유래 카로티노이드 함유 대두유를 제조하고 그의 이화학적 특성을 파악하기 위하여, Box-Behnken design과 반응표면분석법을 이용하여 추출물의 카로티노이드 농도 기준 최적 추출조건(온도 62℃, 시간 32 min, 대두유/감 껍질 비율 3.1)을 결정하였고, 이 조건에서 얻은 추출물(카로티노이드 강화 대두유)과 무처리 대두유(control)의 이화학적 특성을 비교하였다. 추출물의 총카로티노이드 함량은 강화되었고, 이러한 카로티노이드 강화 대두유의 색도는 대조구보다 명도는 낮았지만 높은 적색도와 황색도값을 보였다. 대두유의 산화 및 가열 안정성에 대한 초음파 처리와 감 껍질 유래 카로티노이드의 영향은 미미한 것으로 나타났다. 카로티노이드 강화 대두유의 점도와 활성화 에너지는 대조구보다 약간 높았다. 이로써 감 껍질에 초음파-대두유 용매 추출법을 적용하여 황적색의 카로티노이드 강화 대두유의 제조가 가능하였고, 이는 일반 유지 대체제는 물론 첨가물로서도 활용성이 높을 것으로 기대된다.

우리밀 Semolina 부분 대체에 의한 생면 파스타의 조리특성 (Cooking Quality of Fresh Pasta with Concentrated Korean Wheat Semolina)

  • 김연주;주종찬;김래영;김원태;박재희;전순실
    • 한국식품영양과학회지
    • /
    • 제40권7호
    • /
    • pp.1017-1024
    • /
    • 2011
  • Durum wheat semolina와 가장 유사한 특성을 가지는 우리밀 semolina(FS: fine semolina)를 0, 10, 20, 30, 40 및 50% 대체한 파스타 반죽의 물리적 특성 및 조리특성을 살펴봄으로써 최적의 우리밀 semolina 대체 파스타를 제조하고자 하였다. 우리밀 semolina 첨가 반죽의 파리노그래프 특성은 우리밀 semolina 대체 30%까지 수분흡수율은 증가하였으며, 반죽형성시간은 30% 대체 이상에서 높게 나타나 생산량 증가 및 생면파스타 제조에 긍정적인 영향을 미쳤다. 또한 우리밀 semolina 대체 30% 이상에서 안정도는 낮아지고 연화도는 증가하여 부드러운 질감의 생면파스타의 제조가 가능하며, 아밀로그래프 호화특성은 durum wheat에 비해 호화개시온도는 상승하고, 최고점도는 감소하였다. 반죽의 작업적성평가는 모든 실험군에서 4점 이상의 높은 점수를 나타내었다. 또한 우리밀 semolina의 대체량이 높아질수록 중량 및 부피는 감소하고 탁도 및 조리손실율은 증가하는 것으로 나타났으나, 우리밀 semolina 30% 대체 수준까지는 대조구와 유사한 부피 및 조리손실을 나타내는 것으로 나타났다. 색도는 우리밀 semolina의 대체량이 증가할수록 L값과 a값은 증가하였고, b값은 감소하였다. 물성측정 결과 조리면의 경도는 우리밀 semolina 30% 이상에서 낮은 값을 나타내었으며, 탄력성, 검성, 씹힘성은 높은 값을 나타내었다. 전반적인 기호도에서는 대조구와 우리밀 semolina 30% 이상 대체에서 7점 이상의 높은 점수를 나타내었고, 파스타색은 durum wheat에 가까운 황색을 또는 우리나라 전통 국수와 같은 흰색을 선호해 그 특성이 완전히 양분됨을 알 수 있었으며, 향과 맛은 우리밀 semolina의 대체에 따른 영향을 받지 않는 것으로 나타났다. 또한 파스타의 경도는 낮고, 씹힘성은 높은 것을 선호하는 것으로 나타나 향후 우리밀의 첨가에 따른 품질 및 기호성 향상을 위해서는 우리밀 semolina 30% 대체가 적합하리라 사료된다.

Carbon nanotube field emission display

  • Chil, Won-Bong;Kim, Jong-Min
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제12권7호
    • /
    • pp.7-11
    • /
    • 1999
  • Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

  • PDF

Cefoperazone(T-1551)의 약리학적 연구 (Pharmacological Studies of Cefoperazone(T-1551))

  • 임정규;홍사악;박찬웅;김명석;서유헌;신상구;김용식;김혜원;이정수;장기철;이상국;장우현;김익상
    • 대한약리학회지
    • /
    • 제16권2호
    • /
    • pp.55-70
    • /
    • 1980
  • The pharmacological and microbiological studies of Cefoperazone (T-1551, Toyama Chemical Co., Japan) were conducted in vitro and in vivo. The studies included stability and physicochemical characteristics, antimicrobial activity, animal and human pharmacokinetics, animal pharmacodynamics and safety evaluation of Cefoperazone sodium for injection. 1) Stability and physicochemical characteristics. Sodium salt of cefoperazone for injection had a general appearance of white crystalline powder which contained 0.5% water, and of which melting point was $187.2^{\circ}C$. The pH's of 10% and 25% aqueous solutions were 5.03 ana 5.16 at $25^{\circ}C$. The preparations of cefoperazone did not contain any pyrogenic substances and did not liberate histamine in cats. The drug was highly compatible with common infusion solutions including 5% Dextrose solution and no significant potency decrease was observed in 5 hours after mixing. Powdered cefoperazone sodium contained in hermetically sealed and ligt-shielded container was highly stable at $4^circ}C{\sim}37^{\circ}C$ for 12 weeks. When stored at $4^{\circ}C$ the potency was retained almost completely for up to one year. 2) Antimicrobial activity against clinical isolates. Among the 230 clinical isolates included, Salmonella typhi was the most susceptible to cefoperazone, with 100% inhibition at MIC of ${\leq}0.5{\mu}g/ml$. Cefoperazone was also highly active against Streptococcus pyogenes(group A), Kletsiella pneumoniae, Staphylococcus aureus and Shigella flexneri, with 100% inhibition at $16{\mu}g/ml$ or less. More than 80% of Escherichia coli, Enterobacter aerogenes and Salmonella paratyphi was inhibited at ${\leq}16{\mu}/ml$, while Enterobacter cloaceae, Serratia marcescens and Pseudomonas aerogenosa were somewhat less sensitive to cefoperagone, with inhibitions of 60%, 55% and 35% respectively at the same MIC. 3) Animal pharmacokinetics Serum concentration, organ distritution and excretion of cefoperazone in rats were observed after single intramuscular injections at doses of 20 mg/kg and 50 mg/kg. The extent of protein binding to human plasma protein was also measured in vitro br equilibrium dialysis method. The mean Peak serum concentrations of $7.4{\mu}g/ml$ and $16.4{\mu}/ml$ were obtained at 30 min. after administration of cefoperazone at doses of 20 mg/kg and 50 mg/kg respectively. The tissue concentrations of cefoperazone measured at 30 and 60 min. were highest in kidney. And the concentrations of the drug in kidney, liver and small intestine were much higher than in blood. Urinary and fecal excretion over 24 hours after injetcion ranged form 12.5% to 15.0% in urine and from 19.6% to 25.0% in feces, indicating that the gastrointestinal system is more important than renal system for the excretion of cefoperazone. The extent of binding to human plasma protein measured by equilibrium dialysis was $76.3%{\sim}76.9%$, which was somewhat lower than the others utilizing centrifugal ultrafiltration method. 4) Animal pharmacodynamics Central nervous system : Effects of cefoperazone on the spontaneous movement and general behavioral patterns of rats, the pentobarbital sleeping time in mice and the body temperature in rabbits were observed. Single intraperitoneal injections at doses of $500{\sim}2,000mg/kg$ in rats did not affect the spontaneous movement ana the general behavioral patterns of the animal. Doses of $125{\sim}500mg/kg$ of cefoperazone injected intraperitonealy in mice neither increased nor decreased the pentobarbital-induced sleeping time. In rabbits the normal body temperature was maintained following the single intravenous injections of $125{\sim}2,000mg/kg$ dose. Respiratory and circulatory system: Respiration rate, blood pressure, heart rate and ECG of anesthetized rabbits were monitored for 3 hours following single intravenous injections of cefoperazone at doses of $125{\sim}2,000mg/kg$. The respiration rate decreased by $3{\sim}l7%$ at all the doses of cefoperazone administered. Blood pressure did not show any changes but slight decrease from 130/113 to 125/107 by the highest dose(2,000 mg/kg) injected in this experiment. The dosages of 1,000 and 2,000 mg/kg seemed to slightly decrease the heart rate, but it was not significantly different from the normal control. All the doses of cefoperazone injected were not associated with any abnormal changes in ECG findings throughout the monitering period. Autonomic nervous system and smooth muscle: Effects of cefoperazone on the automatic movement of rabbit isolated small intestine, large intestine, stomach and uterus were observed in vitro. The autonomic movement and tonus of intestinal smooth muscle increased at dose of $40{\mu}g/ml$ in small intestine and at 0.4 mg/ml in large intestine. However, in stomach and uterine smooth muscle the autonomic movement was slightly increased by the much higher doses of 5-10 mg/ml. Blood: In vitro osmotic fragility of rabbit RBC suspension was not affected by cefoperazone of $1{\sim}10mg/ml$. Doses of 7.5 and 10 mg/ml were associated with 11.8% and 15.3% prolongation of whole blood coagulation time. Liver and kidney function: When measured at 3 hours after single intravenous injections of cefoperaonze in rabbits, the values of serum GOT, GPT, Bilirubin, TTT, BUN and creatine were not significantly different from the normal control. 5) Safety evaluation Acute toxicity: The acute toxicity of cefoperazone was studied following intraperitoneal and intravenous injections to mice(A strain, 4 week old) and rats(Sprague-Dawler, 6 week old). The LD_(50)'s of intraperitonealy injected cefoperazone were 9.7g/kg in male mice, 9.6g/kg in female mice and over 15g/kg in both male and female rats. And when administered intravenously in rats, LD_(50)'s were 5.1g/kg in male and 5.0g/kg in female. Administrations of the high doses of the drug were associated with slight inhibition of spontaneous movement and convulsion. Atdominal transudate and intestinal hyperemia were observed in animals administered intraperitonealy. In rats receiving high doses of the drug intravenously rhinorrhea and pulmonary congestion and edema were also observed. Renal proximal tubular epithelial degeneration was found in animals dosing in high concentrations of cefoperazone. Subacute toxicity: Rats(Sprague-Dawley, 6 week old) dosing 0.5, 1.0 and 2.0 g/kg/day of cefoperazone intraperitonealy were observed for one month and sacrificed at 24 hours after the last dose. In animals with a high dose, slight inhibition of spontaneous movement was observed during the experimental period. Soft stool or diarrhea appeared at first or second week of the administration in rats receiving 2.0g/kg. Daily food consumption and weekly weight gain were similar to control during the administration. Urinalysis, blood chemistry and hematology after one month administration were not different from control either. Cecal enlargement, which is an expected effect of broad spectrum antibiotic altering the normal intestinal microbial flora, was observed. Intestinal or peritoneal congestion and peritonitis were found. These findings seemed to be attributed to the local irritation following prolonged intraperitoneal injections of hypertonic and acidic cefoperazone solution. Among the histopathologic findings renal proximal tubular epithelial degeneration was characteristic in rats receiving 1 and 2g/kg/day, which were 10 and 20 times higher than the maximal clinical dose (100 mg/kg) of the drug. 6) Human pharmacokinetics Serum concentrations and urinary excretion were determined following a single intravenous injection of 1g cefoperazone in eight healthy, male volunteers. Mean serum concentrations of 89.3, 61.3, 26.6, 12.3, 2.3, and $1.8{\mu}g/ml$ occured at 1,2,4,6,8 and 12 hours after injection respectively, and the biological half-life was 108 minutes. Urinary excretion over 24 hours after injection was up to 43.5% of administered dose.

  • PDF

Low temperature plasma deposition of microcrystalline silicon thin films for active matrix displays: opportunities and challenges

  • Cabarrocas, Pere Roca I;Abramov, Alexey;Pham, Nans;Djeridane, Yassine;Moustapha, Oumkelthoum;Bonnassieux, Yvan;Girotra, Kunal;Chen, Hong;Park, Seung-Kyu;Park, Kyong-Tae;Huh, Jong-Moo;Choi, Joon-Hoo;Kim, Chi-Woo;Lee, Jin-Seok;Souk, Jun-H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.107-108
    • /
    • 2008
  • The spectacular development of AMLCDs, been made possible by a-Si:H technology, still faces two major drawbacks due to the intrinsic structure of a-Si:H, namely a low mobility and most important a shift of the transfer characteristics of the TFTs when submitted to bias stress. This has lead to strong research in the crystallization of a-Si:H films by laser and furnace annealing to produce polycrystalline silicon TFTs. While these devices show improved mobility and stability, they suffer from uniformity over large areas and increased cost. In the last decade we have focused on microcrystalline silicon (${\mu}c$-Si:H) for bottom gate TFTs, which can hopefully meet all the requirements for mass production of large area AMOLED displays [1,2]. In this presentation we will focus on the transfer of a deposition process based on the use of $SiF_4$-Ar-$H_2$ mixtures from a small area research laboratory reactor into an industrial gen 1 AKT reactor. We will first discuss on the optimization of the process conditions leading to fully crystallized films without any amorphous incubation layer, suitable for bottom gate TFTS, as well as on the use of plasma diagnostics to increase the deposition rate up to 0.5 nm/s [3]. The use of silicon nanocrystals appears as an elegant way to circumvent the opposite requirements of a high deposition rate and a fully crystallized interface [4]. The optimized process conditions are transferred to large area substrates in an industrial environment, on which some process adjustment was required to reproduce the material properties achieved in the laboratory scale reactor. For optimized process conditions, the homogeneity of the optical and electronic properties of the ${\mu}c$-Si:H films deposited on $300{\times}400\;mm$ substrates was checked by a set of complementary techniques. Spectroscopic ellipsometry, Raman spectroscopy, dark conductivity, time resolved microwave conductivity and hydrogen evolution measurements allowed demonstrating an excellent homogeneity in the structure and transport properties of the films. On the basis of these results, optimized process conditions were applied to TFTs, for which both bottom gate and top gate structures were studied aiming to achieve characteristics suitable for driving AMOLED displays. Results on the homogeneity of the TFT characteristics over the large area substrates and stability will be presented, as well as their application as a backplane for an AMOLED display.

  • PDF

Bacterial cellulose를 기반으로 하는 투명전도성막의 제조 및 특성평가 (Fabrication and Characterization of Transparent Conductive Film based on Bacterial Cellulose)

  • 임은채;김성준;기창두
    • Korean Chemical Engineering Research
    • /
    • 제51권6호
    • /
    • pp.766-773
    • /
    • 2013
  • 본 연구에서는 물리적 강도가 뛰어나고 고온에서 안정하며 유연한 친환경 소재인 박테리아 셀룰로오스를 기반으로 투명 전도성막을 제조하였다. 전기전도성의 확보를 위해 은나노와이어(AgNW)와 그래핀을 도입하였다. 합성한 AgNW는 평균적으로 길이 약 $15{\mu}m$, 폭 약 70 nm로 종횡비 214이었다. 종횡비가 클수록 접촉저항을 낮추어 전도성을 개선시키게 된다. 총 7가지의 막을 제조하고 열적 및 전기적 물성을 조사하였다. 또 전도성막으로 제조하기 위해서 BC막을 칼로 길이 2 mm, 깊이 $50{\mu}m$ 간격으로 홈을 파서 직교상의 그물모양을 형성한 후 이 홈에 AgNW와 그래핀을 채워 넣었다. 대표적으로 AgNW 첨가막은 두께 $350{\mu}m$, 전자농도 $1.53{\times}10^{19}/cm^3$, 전자이동도 $6.63{\times}10^5cm^2/Vs$, 비저항 $0.28{\Omega}{\cdot}cm$로 가장 우수한 전기적 특성을 지닌 것으로 평가되었다. 또한 그래핀 첨가막은 두께 $360{\mu}m$, 전자농도 $7.74{\times}10^{17}/cm^3$, 전자이동도 $0.17cm^2/Vs$, 비저항 $4.78{\Omega}{\cdot}cm$이었다. 550 nm 광투과는 AgNW 첨가막 98.1%, 그래핀 첨가막 80.9%로 투명한 전도성 막이 형성되었다. 모든 막이 평면과 휜 상태에서 LED 점등 실험에서 전구의 밝기에 차이가 있었으나 불이 켜졌다. $150{\pm}5^{\circ}C$의 열판에서 박테리아 셀룰로오스 막은 형태가 매우 안정하였으나 같은 두께의 PET는 형태가 심하게 변형되었다. 이러한 연구 결과를 통해 박테리아 셀룰로오스 기반의 투명전도성막을 제조할 수 있는 가능성을 확인하였다.

메틸렌 블루 흡착능 향상을 위한 할로이사이트 기반 튜브형 담체 연구 (Preparation of Halloysite-Based Tubular Media for Enhanced Methylene Blue Adsorption)

  • 전준영;조예빈;김종욱;신승구;전종록;이윤기
    • 청정기술
    • /
    • 제27권4호
    • /
    • pp.359-366
    • /
    • 2021
  • 할로이사이트(Al2Si2O5(OH)4·nH2O)는 다층벽 나노 튜브 구조의 저단가 천연 점토 분말로, 상대적으로 우수한 비표면적으로 인해 수처리용 염료 흡착 소재로 연구되어왔다. 분말형 점토 소재는 수처리 시 응집으로 인한 관막음 현상을 억제하기 위해서 흡착 담체로의 사용이 검토되나, 강도 확보를 위한 높은 소성 온도 및 분말 대비 낮은 소재 활용률로 인해 흡착능 구현에 난점이 있다. 본 연구에서는 750 ℃에서 대기 소성에 따른 할로이사이트의 메틸렌블루(MB) 흡착능 유지율을 평가하였으며, 소재 활용율 향상을 위한 관형의 할로이사이트 담체를 제조하였다. 할로이사이트의 높은 열적 구조 안정성은 투과전자현미경 이미지를 통해 평가되었으며, 할로이사이트는 각각 22% (7.65 mg g-1), 6% (11.7 mg g-1)의 유지율을 보인 규조토 및 마그네솔®XL 대비 우수한 MB 흡착능 유지율 및 흡착능(93%, 18.5 mg g-1) 나타내었다. 또한, 성형 시 리그닌과의 복합화는 기존 소성체 대비 흡착능이 향상되었으며, 수소 분위기 하 소성 시 초기 MB 흡착을 촉진했다. 관형의 할로이사이트 담체는 접촉면적의 증가를 통해 막대형 담체 대비 빠른 초기 흡착량의 증가 및 우수한 질량 당 흡착능(7.36 mg g-1)을 구현하였다.

Hybrid CNN-LSTM 알고리즘을 활용한 도시철도 내 피플 카운팅 연구 (A Study on People Counting in Public Metro Service using Hybrid CNN-LSTM Algorithm)

  • 최지혜;김민승;이찬호;최정환;이정희;성태응
    • 지능정보연구
    • /
    • 제26권2호
    • /
    • pp.131-145
    • /
    • 2020
  • 산업혁신의 흐름에 발맞추어 다양한 분야에서 활용되고 있는 IoT 기술은 빅데이터의 접목을 통한 새로운 비즈니스 모델의 창출 및 사용자 친화적 서비스 제공의 핵심적인 요소로 부각되고 있다. 사물인터넷이 적용된 디바이스에서 누적된 데이터는 사용자 환경 및 패턴 분석을 통해 맞춤형 지능 시스템을 제공해줄 수 있어 편의 기반 스마트 시스템 구축에 다방면으로 활용되고 있다. 최근에는 이를 공공영역 혁신에 확대 적용하여 CCTV를 활용한 교통 범죄 문제 해결 등 스마트시티, 스마트 교통 등에 활용하고 있다. 그러나 이미지 데이터를 활용하는 기존 연구에서는 개인에 대한 사생활 침해 문제 및 비(非)일반적 상황에서 객체 감지 성능이 저하되는 한계가 있다. 본 연구에 활용된 IoT 디바이스 기반의 센서 데이터는 개인에 대한 식별이 불필요해 사생활 이슈로부터 자유로운 데이터로, 불특정 다수를 위한 지능형 공공서비스 구축에 효과적으로 활용될 수 있다. 대다수의 국민들이 일상적으로 활용하는 도시철도에서의 지능형 보행자 트래킹 시스템에 IoT 기반의 적외선 센서 디바이스를 활용하고자 하였으며 센서로부터 측정된 온도 데이터를 실시간 송출하고, CNN-LSTM(Convolutional Neural Network-Long Short Term Memory) 알고리즘을 활용하여 구간 내 보행 인원의 수를 예측하고자 하였다. 실험 결과 MLP(Multi-Layer Perceptron) 및 LSTM(Long Short-Term Memory), RNN-LSTM(Recurrent Neural Network-Long Short Term Memory)에 비해 제안한 CNN-LSTM 하이브리드 모형이 가장 우수한 예측성능을 보임을 확인하였다. 본 논문에서 제안한 디바이스 및 모델을 활용하여 그간 개인정보와 관련된 법적 문제로 인해 서비스 제공이 미흡했던 대중교통 내 실시간 모니터링 및 혼잡도 기반의 위기상황 대응 서비스 등 종합적 메트로 서비스를 제공할 수 있을 것으로 기대된다.

독도 해역 초미소남세균 다양성의 계절적 변동 (Seasonal Variation of Picocyanobacterial Community Composition in Seawaters Around Dokdo, Korea)

  • 최동한;안성민;최유리;노현수;노재훈
    • 한국해양학회지:바다
    • /
    • 제20권4호
    • /
    • pp.192-198
    • /
    • 2015
  • 초미소식물플랑크톤은 지름 $3{\mu}m$ 이하의 작은 크기에도 불구하고 열대 외양 뿐만 아니라 온대의 연안 해역에서도 일차생산자로서 중요한 기능을 한다. 초미소식물플랑크톤 중 Synechococcus와 Prochlorococcus는 현재까지 20여개 및 10여개 이상의 clade가 확인되어 유전적 다양성이 매우 높고, 주요 clade들의 생물지리학적 분포 및 생태적 특성도 잘 알려져 있다. 본 연구는 계절적 변동이 뚜렷하고, 난류와 한류의 영향으로 다양한 물리적 특성이 나타나는 독도 주변 해역에서 초미소남세균의 개체수 및 유전적 다양성을 조사함으로써, 독도 주변 해역에서 초미소남세균 다양성의 분포 특성과 환경과의 연관성을 이해하고자 하였다. Synechococcus 개체수는 겨울에 낮고 수온이 점차 증가함에 따라 지수적으로 증가한 후 $20^{\circ}C$ 이상에서 포화되는 양상을 보였다. 반면, Prochlorococcus는 대부분의 시기에 나타나지 않거나, 소수로 출현하는 것으로 파악되었다. 그러나, 여름에는 HLII 생태형에 속하는 Prochlorococcus가 약 7%정도까지 출현하였다. 봄과 초여름에 초미소남세균의 개체수는 주로 저온성인 Synechococcus clade I과 IV의 성장에 의해 증가되는 것으로 나타났으며, 이후 8월에는 난수와 빈영양 환경을 선호하는 clade II를 포함한 다양한 clade의 Synechococcus가 이들을 대체하며 높은 개체수를 유지하는 양상을 보였다. 그러나 하계에도 엽록소 최대층에서는 수온이 $9{\sim}17^{\circ}C$ 정도로 낮아 여전히 저온성 clade I과 IV가 우점하였다. 엽록소 최대층에서 Synechococcus 개체수 증가에 수온 이외에 수층의 안정도도 중요한 요인으로 나타났으며, Synechococcus의 다양성도 대체로 수온 분포에 의해 잘 설명될 수 있었으나, 물리적 특성이 다른 수괴의 유입과 혼합도 다양성의 분포를 결정하는 중요한 요인으로 파악되었다. 따라서, 독도 주변해의 부유성 생물의 생태를 이해하기 위해서는 계절적 환경 변동뿐만 아니라 다양한 물리적 과정도 고려되어져야 할 것으로 보인다.

된장으로부터 분리한 Bacillus subtilis CK-2가 생산하는 가수분해효소의 활성 특성 (Characteristics of Hydrolytic Enzymes that Produced by Bacillus subtilis CK-2 Isolated from Doenjang)

  • 이상협;김철호
    • 생명과학회지
    • /
    • 제27권7호
    • /
    • pp.805-811
    • /
    • 2017
  • 이전의 논문에서 된장으로부터 섬유소와 지질, 녹말, 그리고 단백질을 포함하는 다양한 유기물을 가수분해하는 세균을 분리한 바 있다. 본 연구에서는 분리균주인 Bacillus subtilis CK-2가 생산하는 각종 가수분해효소의 조효소 특성을 확인하였다. 섬유소분해효소의 경우 적정 수소이온농도는 pH 5.0, 적정온도는 $55^{\circ}C$로 확인되었으며, pH 5.0~10.0과 $20{\sim}50^{\circ}C$의 범위에서 높은 활성을 나타내었다. 섬유소분해효소는 $Co^{2+}$ 이온에 의해 활성이 높아지며, 0.45%(w/v)의 $Co^{2+}$ 이온 농도에서 가장 높은 활성을 보였다. 녹말분해효소의 경우 적정 수소이온농도는 pH 5.0, 적정온도는 $50^{\circ}C$로 확인되었으며, pH 4.0~5.0과 $20{\sim}50^{\circ}C$의 범위에서 높은 활성을 나타내었다. 녹말분해효소는 $Co^{2+}$ 이온에 의해 활성이 높아지며, 0.2%(w/v)의 $Co^{2+}$ 이온 농도에서 가장 높은 활성을 보였다. 단백질분해효소의 경우 적정 수소이온농도는 pH 8.0, 적정온도는 $50^{\circ}C$로 확인되었으며, pH 7.0~8.5과 $20{\sim}50^{\circ}C$의 범위에서 높은 활성을 나타내었다. 섬유소분해효소는 $Mn^{2+}$ 이온에 의해 활성이 높아지며, 0.125%(w/v)의 $Mn^{2+}$ 이온 농도에서 가장 높은 활성을 보였다. 이러한 결과로부터 B. subtilis CK-가 생산하는 가수분해효소를 산업적으로 이용하기 위해서는 효소의 종류에 따라 수소이온농도와 온도, 그리고 금속이온을 적절하게 조절할 필요가 있다는 것을 알 수 있다.