• 한국정보전자통신기술학회논문지
• /
• 제12권6호
• /
• pp.619-628
• /
• 2019

본 논문에서는 진성난수 생성기를 위한 베타선 센서를 설계하였다. PMOS 피드백 트랜지스터의 게이트를 DC 전압으로 바이어스하는 대신 PMOS 피드백 트랜지스터에 흐르는 전류가 PVT 변동에 둔감하도록 설계된 전류 바이어스 회로를 mirroring하게 흐르도록 하므로 CSA의 signal voltage의 변동을 최소화하였다. 그리고 BGR (Bandgap Reference) 회로를 이용하여 공급된 정전류를 이용하여 신호 전압을 VCOM 전압 레벨까지 충전하므로 충전 시간의 변동을 줄여 고속 감지가 가능하도록 하였다. 0.18㎛ CMOS 공정으로 설계된 베타선 센서는 corner별 모의실험 결과 CSA 회로의 최소 신호전압과 최대 신호전압은 각각 205mV와 303mV이고, pulse shaper를 거친 출력 신호를 비교기의 VTHR (Threshold Voltage) 전압과 비교해서 발생된 펄스의 최소와 최대 폭은 각각 0.592㎲와 1.247㎲로 100kHz의 고속 감지가 가능한 결과가 나왔으며, 최대 100Kpulse/sec로 계수할 수 있도록 설계하였다.

• 전기전자학회논문지
• /
• 제8권2호
• /
• pp.166-171
• /
• 2004

본 논문은 두 신호의 시간 차이를 디지털 신호로 변환하는 시간디지털변환기(Time to Digital Converter) 변환기에 대해서 서술하였다. 시간 차이를 측정하는 방법에는 여러 가지가 있으나 변환시간이나 저해상도의 단점을 가지고 있으며 또한 복잡한 구조를 가지는 문제점이 있다. 그러나 본 논문에서 제안한 시간디지털변환기회로는 고속 디지털 샘플러를 사용함으로써 단순한 구조로 높은 해상도(25ps)를 실현할 수 있었다. 입력신호가 시간디지털변환기의 입력으로 들어오면 샘플러가 신호를 검출해내고 레지스터에 의해 처리된 후 코딩블럭에 의해서 코딩되게 된다. 또한 25ps의 해상도를 얻기 위해서 본 논문에서는 다중위상클록발생기를 구현하였다.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.53-60
• /
• 2004

We have developed and manufactured an experimental ultrasonic polishing machine with frequency of 20kHz at the power of vibration 1.7㎾ for effective ultrasonic polishing in processing of high hardness material. Design of the horn is performed by the FEM analysis. The following conclusions were empirically deduced through experimental results to clarify the major elements which affect the surface roughness during the ultrasonic process by following the experimental plans. The ultrasonic polishing machine has been developed in parts of structure part, ultrasonic generator, vibrator. We were able to process the high hardness material without difficulty as a result of ultrasonic polishing by utilizing the groove added step-type horn. Through analyzing by applying the experimental plans, the rotating speed of the horn was determined to be the major factor in influencing the surface roughness. In the case of ceramic, wafer, we were able to obtain good surface roughness when the feed rate and the ultrasonic output were higher. Because the load on slurry particle increases when the ultrasonic output is higher, the processed surface becomes worse in the case of optical glass.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1228-1233
• /
• 2013

In this paper, design of Wound Rotor Synchronous Motor(WRSM) for Integrated Starter and Generator(ISG) is performed based on Finite Element Analysis(FEA). WRSM can control not only magnitude and phase of armature current, but also field current. Thus, various control methods can be considered. Since driving characteristic of WRSM depends greatly on the control method, characteristic analysis accoding to possible driving current combination is reguired. Especially in high speed region, the control method that reduces unnecessary d-axis current by reducing field current is possible, which is similar to field weakening control. By the current combination reducing field and d-axis current, the design minimizing copper loss to increase efficiency on identical driving point is possible. In this paper, high efficient WRSM is designed applying the current combination which can minimize copper loss on each driving point.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1260-1268
• /
• 2009

Three methods(the stepped sine method, the statistical method(random excitation method) and the maximum-length sequence(MLS) method) for head-related transfer functions(HRTFs) are experimentally compared in view point of accuracy and efficiency. First, the stepped sine method has high signal-to-noise ratio, but low efficiency. Second, the statistical method is fast measurement speed, but weak to noise than the other methods. Finally, the MLS method shows both good efficiency and high signal-to-noise ratio, but it needs additional software or equipment such as MLS signal generator. For comparison of measurement accuracy, HRTFs of KEMAR dummy are measured for various azimuths and elevations. Error norms for magnitude and phase of HRTFs are defined and calculated for the measured HRTFs. The calculated error norms show that the methods give similar results in magnitude and phase except a little phase difference in the MLS method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.3040-3053
• /
• 2015

Wideband code division multiple access (WCDMA), high speed packet access (HSPA) and HSPA+ are third generation partnership project (3GPP) standards. These systems are the major wireless communication standards. In order to test the performance of WCDMA/HSPA/HSPA+ signal in a base station, the measurement hardware is required to the evaluation of the transmitted signals. In this paper, the algorithm for the performance measurement of the WCDMA/HSPA/HSPA+ is proposed. Also, the performance of the measurement algorithm is used to evaluate the generated signal by the WCDMA/HSPA/HSPA+ signal generator. Generally, the algorithm of normal modems cannot be applied to the measurement system because the signal measurement equipment needs to guarantee the high accuracy. So, the WCDMA/HSPA/HSPA+ signal measurement algorithm for the accurate measurement is proposed. By the simulation, it is confirmed that the proposed measurement algorithm has good performance compared with the specification. Therefore, the proposed algorithm can be usefully applied to verify the performance of the measurement using the simulation.

• 설비공학논문집
• /
• 제15권5호
• /
• pp.432-438
• /
• 2003

This paper describes a modified Roebuck compression device as a potential compression device of a rotating cryogenic refrigeration system in superconducting machine such as generator or motor. The conventional cryogen transfer method from stationary refrigeration system to rotating system can be eliminated by an on-board cryogenic refrigeration system that utilizes well-designed multi-stage modified Roebuck compression device. This paper shows basic thermodynamic analysis of modified Roebuck compression device and its application for compressing neon at 77 K with substantial pressure ratio when the rotor diameter is 0.8 m with rotating speed of 3600 rpm. The device does not require any moving part in rotating frame, but two separate thermal reservoirs to convert thermal energy into mechanical compression work. The high temperature thermal reservoir is atmospheric environment at 300 K and the low temperature thermal reservoir is assumed as a liquid nitrogen bath at 77 K. The concept of the compression device in this paper demonstrates its usefulness of generating high-pressure neon at 77 K for rotating J-T neon refrigeration cycle of superconducting rotor.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권10호
• /
• pp.587-594
• /
• 2002

A low frequency square wave electronic ballast for the high intensity discharge(HID) lamps using fuzzy logic controller is developed. This electronic ballast consists a buck converter, a low frequency square wave full bridge inverter, a high voltage pulse generator for the HID lamp ignition, an over current protection circuit and an 8-bit microcontroller. The ballast system is operated on the constant current mode during the HID lamp start-up process and the system is operated on the constant power mode during steady state. Experimental results show that the fuzzy logic control operation is carried out successfully by the 8-bit microcontroller PIC16F877 In this electronic ballast system, in spite of the limited control bandwidth caused by low operating speed of the microcontroller, the good performance in the constant lamp current characteristic is obtained. Acoustic resonance of the HID lamps can be effectively avoided because the instantaneous In lamp power is fully constant due to the low frequency square wave drive.

• 한국정보통신학회논문지
• /
• 제10권3호
• /
• pp.467-472
• /
• 2006

본 논문은 BLDC 서보 모터를 채 택하는 복합연막탄 선회구동 장치를 제어하기 위한 정밀 시스템설계 및 위치 제어 알고리즘 개발을 목적으로 하고 있다. 복합연막탄은 상대편 전차의 시계를 가리는 역할을 해야 하므로 짧은 시간 안에 상대방의 존재를 감지하고 연막탄을 발사할 수 있는 빠른 응답성이 요구된다. 따라서 $300[Hz]\sim500[Hz]$의 빠른 전류 응답 능력을 보이는 시스템 설계가 제안된다. 그리고 연산 속도의 증가를 위해 MIX-MAX PWM기법이 사용된다. 발사각 제어를 위해서는 지령 속도 궤적의 적분치를 활용하는 정밀 위치제어 알고리즘을 제안한다. 또한, 이러한 특성들이 전류, 전압, 위치, 속도 등의 파라미터 그래프를 보여주는 PC 반의 프로그램에 의해 모니터링 되고 평가된다. 부동소숫점 방식의 고성능 DSP인 TMS320VC33을 사용하여 제어기를 구성하였으며 PWM 발생부는 CPLD인 EPM7128을 사용하여 구현하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.392-399
• /
• 2009

The paper concerns the description of the step by step development process of the new fixed blade runner called "Mixer" suitable for the uprating of the Francis turbines units installed at the older low head hydropower plants. In the paper the details of hydraulic and mechanical design are presented. Since the rotational speed of the new runner is significantly higher then the rotational speed of the original Francis one, the direct coupling of the turbine to the generator can be applied. The maximum efficiency at prescribed operational point was reached by the geometry optimization of two most important components. In the first step the optimization of the draft tube geometry was carried out. The condition for the draft tube geometry optimization was to design the new geometry of the draft tube within the original bad draft tube shape without any extensive civil works. The runner blade geometry optimization was carried out on the runner coupled with the draft tube domain. The blade geometry of the runner was optimized using automatic direct search optimization procedure. The method used for the objective function minimum search is a kind of the Nelder-Mead simplex method. The objective function concerns efficiency, required net head and cavitation features. After successful hydraulic design the modal and stress analysis was carried out on the prototype scale runner. The static pressure distribution from flow simulation was used as a load condition. The modal analysis in air and in water was carried out and the results were compared. The final runner was manufactured in model scale and it is going to be tested in hydraulic laboratory. Since the turbine with the fixed blade runner does not allow double regulation like in case of full Kaplan turbine, it can be profitably used mainly at power plants with smaller changes of operational conditions or in case with more units installed. The advantages are simple manufacturing, installation and therefore lower expenses and short delivery time for turbine uprating.