• 한국식품과학회지
• /
• 제20권2호
• /
• pp.205-212
• /
• 1988

마늘의 영하온도에서 저장시 나타나는 내한성(耐寒性)의 원인규명을 위하여 인편의 성분조성이 빙점 강하에 미치는 영향에 대하여 시험하였다. 생체(生體)마늘의 성분조성의 특징은 가용성고형분이 $40^{\circ}$ Brix(건물기준액 90%)로 일반과채류의 $10^{\circ}$ Brix에 비(比)하여 월등히 높았으며 그 구성은 총 90%중 당류가 70% 단백질이 20%였다 그리고 불용성 고형분 10%의 조성은 회분 3% 조섬유 3%였고 그외 지방, 탄수화물 및 단백질을 합(合)하여 4%정도로 되어 있었다. 마늘 성분중 당류는 fructosan이 주종(主種)이었으며 이들은 $1{\sim}29$ 중합도(Polymerization degree)의 것이 혼재되어 있으며 특히 $4{\sim}5$중합도의 것이 전체 50%이상으로 가장 많았다. 마늘의 내한성 지표인 빙점은 수용성고형분 농도가 높을수록 낮았고 동일농도일 경우에는 저중합도(低重合度)의 fructosan일수록 낮았다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.125-136
• /
• 1997

Digestion of a municipal wastewater sludge by the anaerobic sequencing batch reactor(ASBR) was investigated to evaluate the performance of the ASBR process at a critical condition of high-solids-content feed. The reactors were operated at an HRT of 10 days with an equivalent loading rate of 0.8-1.5 gVS/L/d at $35^{\circ}C.$ The main conclusions drawn from this study were as follows: 1. Digestion of a municipal wastewater sludge was possible using the ASBR in spite of high concentration of settleable solids in the sludge. The ASBRS with 3- and 4-day cycle period showed almost identical high digestion performances. 2. No adverse effect on digestion stability was observed in the ASBRS in spite of withdrawal and replenishment of $30\%\;or\;40\%$ of liquid contents. A conventional anaerobic digester could be easily converted to the ASBR without any stability problem. 3. Flotation thickening occurred in thicken step of the ASBRS throughout steady state, and floating bed volume at the end of thicken period occupied about $70\%$ of the working volume of the reactor. Efficiency of flotation thickening in the ASBRS could be comparable to that of additional gravity thickening of a completely mixed digester. 4. Solids were accumulated rapidly in the ASBR during start-up period. Solids concentrations in the ASBRS were 2.6 times higher than that in the completely mixed control reactor at steady state. Dehydrogenase activity had a strong correlation with the solids concentration. Dehydrogenase activity of the digested sludge in the ASBR was 2.9 times higher than that of the sludge in the control reactor, and about 25 times higher than that of the subnatant in the ASBR. 5. Remarkable increase in equivalent gas production of $52\%$ was observed at the ASBRS compared with the control reactor in spite of similar Quality of clarified effluent from the ASBRS and control reactor. The increase in gas production from the ASBRS was believed to be combined results of accumulation of microorganisms, higher driving force applied, and additional long-term degradation of organics continuously accumulated.

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.111-120
• /
• 2000

In case of constructing concrete structure under water, generally concrete mixed with antiwashout admixture, high range water reducer, or AE-water reducing agent etc has been manufactured to ensure the quality of antiwashout underwater concrete because of being difficulty in ascertaining construction situation by the naked eye. The properties of high quality antiwashout underwater concrete that were aimed at affluent fluidity, workability and the compressive strength of 450 kgf/$\textrm{cm}^2$ at 28 ages using two types of blended cements are following as;(1) Setting time of antiwashout underwater concretes using blended cements was more greatly delayed than that of control concrete, however, was satisfied with criteria value of "Quality standard specification of antiwashout admixture for concrete".(2) As a test results of slump flow, efflux time and box elevation of head, it was found that workability of high quality antiwashout underwater concrete was improved. (3) Heat evolution amount of OPC was 1.5 times as high as that of two types of bended cements in 72 hours. (4) Suspended solids of antiwashout underwater concrete using blended cements was more than that of control concrete, also compressive strength of high quality antiwashout underwater concrete was very low in early age, but was better than that of control concrete as to increasing ages.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.160-161
• /
• 2021

To prepare polyurethane coatings for top coatings of automobiles, acrylic resins containing 75% of solids were synthesized by a radical polymerization. The viscosity of the acrylic resins was increased with increasing OH values. Crosslinked acrylic-urethane clear coatings were obtained by curing reaction between the synthesized acrylic resins and hexamethylene diisocyanate(HDI) trimer(Desmodur N-3600). The physical properties from the following studies were carried out : viscosity(Zahn cup #2), adhesion, pensil hardness, and 60° specular gloss. Various properties of the acrylic-urethane clear coatings as top coatings of mobile coat were evaluated on the coating specimens. Adhesion property to a substrate, 60° specular gloss, and pencil hardness of prepared paint showed quite good properties.

• 원예과학기술지
• /
• 제35권3호
• /
• pp.381-386
• /
• 2017

'장하'품종은 농촌진흥청 국립식량과학원 고령지농업연구소에서 2014년도 육성한 사계성 딸기 신품종이다. '장하'는 '고하'품종을 모본으로 하고 '엘시뇨' 품종을 부본으로 2008년 교배하여, 고온장일조건에서 당도가 높고 화방이 연속적으로 출현되는 우수한 사계성 개체를 선발한 것이다. 고랭지의 여름재배 작형에서 2011년 생산력 검정, 2012년 특성검정을 거쳐 '새봉 6호'로 계통명을 부여하고, 2013-2014년에는 2지역 적응성시험을 거쳐 '장하'로 명명하였다. '장하'의 초형은 반개장형이며, 엽형은 타원형이며, 초세가 중간이다. 과실모양은 원추형이며, 과색은 붉은 색이다. 엽수는 21.4매로 '플라멩고'의 55.8매 보다 34.4매 적다. '장하'의 당도는 8.9%로 '플라멩고'의 7.7%보다 1.2% 더 높다. '장하'의 평균과중은 11.7g으로 사계성 품종 중에서 중간크기에 속하는 편이고, 상품수량은 $19,013kg{\cdot}ha^{-1}$으로 '플라멩고' 품종보다 141% 더 많았다. '장하'는 식미가 좋아 생식용으로 적당한 사계성딸기 품종이다.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.86-92
• /
• 2004

Lab-scale experiments have been carried out to investigate ammonia stripping with a modified spray tower for removing ammonia nitrogen from swine wastewater. The operating conditions such as initial pH, temperature, air flow, hole size of distributor determining the diameter of water drops, and influent solids concentration were closely examined focusing on removal efficiency of ammonia. As a result of the experiment, in order to achieve high rate of ammonia removal by the air stripping system, the air flow rate must be supplied at high rate with sufficiently high initial pH, temperature. The optimum operating condition to meet the residual ammonia concentration of 300 mg/L was the initial pH of 11.0 at $35^{\circ}C$ with the air flow rate of 20 L/min. It also showed that the smaller hole size is, the higher removal rate of ammonia is expected. However, when used a small sized distributor (2 mm), the flooding problem at the upper column occurred due to clogging of the hole. With regard to the influent solids concentration, it was showed that the lower concentration of solids, the higher removal rate of ammonia. The removal of particulate materials in influent led to improve the removal efficiency of ammonia, rather than to control the operating condition including initial pH, temperature, and air flow. The empirical correlation between KLa and operating parameters would be driven as, $K_{La}=(0.0003T-0.0047){\cdot}G^{0.3926}{\cdot}L^{-0.5169}{\cdot}C^{-0. 1849}$. The calculated $K_{La}$ from proposed formula can be used effectively to estimate the optimum reaction time and to calculate the volume of modified spray tower system.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.283-291
• /
• 2004

Recently, the construction of underwater structures has been gradually increased, but underwater concrete got some problems of quality deterioration and water contamination around cast-in-situ of construction. In addition, massive underwater structures such as LNG tank, underwater concrete structures of large and continuous high- strength subterranean wall under water are being demanded lower heat of hydration. In this paper, the mechanical properties of high-strength antiwashout underwater concrete (HAWC) containing with two kinds of mineral admixtures respectively were investigated. On the basis of these results, the pH value and suspended solids of HAWC manufactured in the mock-up test were 10.0$\Box$11.0 and 51 mg/${\iota}$ at 30 minutes later, respectively, initial and final setting time were about 30,37 hours, and the slump flow was 530$\pm$20Tm. In the placement at a speed of $27 m^3/hr$, there was no large difference in flowing velocity with or without reinforcing bar, and flowing slope was maintained at horizontal level. Compressive strength and elastic modulus of the cored specimen somewhat decreased as flowing distance was far; however, those of central area showed the highest value.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.59-63
• /
• 2012

This paper proposes a modified Ludzack-Ettinger (MLE) type membrane bioreactor (MBR) as a method of treatment for wastewater from food waste disposer. Micro-membrane filtration allows for an extremely low concentration of suspended solids in the effluent. The effluent of the reactor in question is characterized by a relatively high level of non-biodegradable organics, containing a substantial amount of soluble microbial products and biomass. Results obtained in this paper by measurement of membrane fouling are consistent with biomass concentration in the reactor, as opposed to chemical oxygen demand (COD). The MLE process is shown to be effective for the treatment of wastewater with a high COD/N ratio of 20, resulting in are markedly high total nitrogen removal efficiency. Denitrification could be improved at a higher internal recycle ratio. Despite the low concentration of influent phosphorus, the phosphorus concentration of the outflow is seen to be relatively high. This is because outflow phosphorous concentration is related to COD consumption, and the process operates at along solids retention time.

• 한국축산시설환경학회지
• /
• 제22권1호
• /
• pp.35-44
• /
• 2016

This study was conducted to establish a database of high solid manure(HSM) in domestic. Theoretical methane potential and HSM characteristics was evaluated using breef and dairy manure (n=156). Total solids and Volatile solids of HSM increased depending on time flow, the results showed $20.4{\pm}3.2$ and $17.4{\pm}2.8%$. respectively. C/N ratio of breef HSM was higher than dairy HSM C/N ratio. In theoretical methane potential, the result of breef and dairy HSM was showed $505.2{\pm}25.3$ and $493.5{\pm}20.2$, respectively. Nitrogen content of total HSM increased depending on time flow, the result of breef and dairy nitrogen content was showed $1.9{\pm}0.3$ and $2.8{\pm}0.2$, respectively. Carbon content of total HSM showed approximately 10% reduction. The optimal time of bed replacement was indicated between 29 amd 31 days based on the optimal C/N ratio. Therefore, this study was considered that it has high utilization for livestock manure recycling and basis of relevant research.

• 한국작물학회지
• /
• 제55권4호
• /
• pp.284-291
• /
• 2010

고 고형분함량 감자 생산을 위한 수확시기를 예측하는 데 있어 에너지 소모량의 추정에 대한 연구결과는 다음과 같다. 1. 각 지역별로 포장의 파종시기부터 수확시기까지 최근 5년간(2005년~2009년) 평균기온, 강수량, 상대습도, 일조시간, 바람, 지중온도 등의 농업환경을 조사한 결과 파종기 저온피해와 괴경비대기 장마기간을 회피한다면 가공용 원료감자는 가공품 생산에 필요시마다 물량을 수급하기 때문에 만숙재배를 하지 않아 품종의존도가 낮아 수확시기의 환경에 대한 비중이 큰 것으로 판단되었다. 2. 파종시기부터 출현까지에는 지중온도에 영향을 많이 받아 지역별 편차가 심해 시뮬레이션에서는 출현시기를 기준으로 감자의 수확적기를 예측하는 것이 바람직하였다. 3 수확시기를 예측하기 위한 생장모형은 $Tp=\frac{Tm{\cdot}Wm^{Tp}}{Wm^{Tm}}$를 사용하고, 생장량 Wm을 계상하는 기본 생장모형은 $Wm={\int}^m_tf(x)dt$를 사용하였다. 4. 기본 생장모형을 통해 Wm을 계상할 때는 광합성율(${\Delta}A$)과 식물체내 에너지 소모(${\Delta}E$) 개념을 적용해야 보다 정밀한 수확시기를 예측할 수 있었으며, 식물체내 에너지 소모에 대한 정의는 기후변화에 대응하여 농업환경에 대처하는 식물체내 에너지 소모를 계상하는 것으로 최근 5년간(2005년~2009년) 수확시기에 따라 고형분함량을 측정한 결과 광합성율만 계상할 때 보다 에너지 소모개념을 적용한 것이 효과적이었다.