• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.30-34
• /
• 2011

A. arguta is found nationwide whether the altitude is low or high if good drainage is achieved with plenty of water. The distribution of A. polygama seems to be more limited to higher altitude than A. arguta so it can be found in deep valley of highland even in Mt. Halla. A. kolomikta seems rather limited to colder area than A. arguta to Mt. Jiri to the south. Meanwhile, A. rufa is very confined to southern islands including Jeollanamdo and Jeju islands. Some institutes still continue to utilize Korean native Actinidia plants commercially since early 1980's. More collaborative efforts are needed for further development of these plants nationwide.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.6
• /
• pp.20-26
• /
• 2008

Today, there are many high speed data access systems that provide the truly "anytime and anywhere" services. Especially, HSDPA (High Speed Data Packet Access), one of the main third generation mobile communication systems, provides 14.4Mbps maximum data throughput. However, HSDPA will fail to provide high data throughput in hostile multipath fading environments due to lack of LOS (Line of Sight). HAPS (High Altitude Platform Station) is one of the solutions to this problem. HAPS system not only provides Los, but it can also provide high data rate services to the conventional terrestrial systems. This paper proposes HAPS-HSDPA system model and compares performance of HSDPA and HAPS-HSDPA.

• The Korean Journal of Ecology
• /
• v.23 no.3
• /
• pp.281-291
• /
• 2000

The objectives of this study were to classify quantitatively vegetational types of P. densiflora for. erecta forest. The results were summarized as follows. 1) According to the canonical correspondence analysis(CCA), variables such as topography, altitude, available P/sub 2/O/sub 5/, and Mg/sup 2＋/were highly correlated on three axes. Based on the correlations between vegetation units and environmental factors, Rhododendron micranthum community tended to be more distributed in the such situations of high altitude, upper topography, high C/N ratio, low level of Mg/sup 2＋/and Ca/sup 2＋/. Vaccinium koreanum community tended to be more distributed in the such conditions of high altitude, upper topography, high level of Ca/sup 2＋/and Ma/sup 2＋/. 2) According to the results of importance value analysis, Tree layer and Subtree layer in study areas showed high Ⅳ along with P. densiflora for. erecta, Quercus mongonlica, Q. variabilis, Q. serrata, Fraxinus rhychophylla and shrub layer indicated that Ⅳ of P. densiflora for, erecta in Sokwang-ri area was higher than those of the other areas. Therefore, it was considered that P. densiflora for. erecta forest of Sokwang-ri area could be naturally regenerated. 3) According to results of species diversity, the species diversity of Uljin region showed the least low value as 0.6622, other regions appeared about 0.7. In the diversity by vegetation types, Acer pseudosieboldianum community showed high value. 4) According to the analysis of community similarity, Sokwang-Ri region was lowly correlated with Uljin region, while the index among the other areas appeared above 0.6. 5) According to the analysis of interspecific association, it was divided into 2 groups. The species of first group were mainly involved in character species, and the species of second group were involved in differential species groups.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.417-422
• /
• 2003

The objective of this study was to assess the regime of heat shock protein and leaf temperature caused by high temperature stress in chinese cabbage grown in alpine region. In monsoon period, high temperature and heavy rain have caused a stress condition for the cultured higher plants. Chinese cabbages were grown in different altitude, i.e. 600 m and 1,100 m. It was demonstrated that heat shock protein (Hsp 90) in alpine chinese cabbage leaf was actively expressed by high temperature and surplus nitrogen application. As a results of thermo-graphically observed leaf temperatures, chinese cabbage grown in high altitude region were ranged from 20.5 to $24.3^{\circ}C$ while in low altitude from 24.0 to $31.5^{\circ}C$. Furthermore, analysis of assimilated nutrients indicated that total nitrogen content was higher in plant grown under high temperature than under low temperature.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1649-1653
• /
• 2007

High temperature stresses have caused growth inhibition and delayed heading in highland cultivation Chinese cabbage during summer in Korea. We have studied high temperature stress responses in the terms of changes of inorganic components and proteins by proteomic analyses. Insufficiencies of nitrogen and phosphorus have affected growth rate and calcium deficiency has caused blunted heading. Proteins extracted from Brassica seedling grown at the altitude of 600m and 900m in the Mount Jilun were extracted and analysed by 2-dimentional polyacrylamide gel electrophoresis. Profiles of protein expression was then analyzed by 2-dimentional gel analyses. Protein spots showing different expression level were picked using the spot handling workstation and subjected to MALDI-TOF MS. Total 48 protein spots were analyzed by MALDI-TOF MS and 30 proteins spots out of 48 were identified by peptide mass fingerprinting analyses. Fourteen proteins were up-regulated in extracts from the altitude of 900m and they were identified as oxygen-evolving proteins, rubisco activase and ATPase etc. Sixteen proteins were up-regulated in extracts from the altitude of 600m and they were identified as glutathione S-transferase(1, 28kD cold induced- and 24 kD auxin-binding proteins) and salt-stress induced protein etc. These stress-induced proteins were related to the mediated protective mechanism against oxidative damage during various stresses. The results indicated that physiological phenomenon in response to high temperature stresses might be resulted by complex and multiple array of responses with drought, heat, oxidative, salt, and cold by high temperature.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.162-170
• /
• 2005

In KSLV-I, actuation system for thrust vector control of kick motor was configured as electro-hydraulic servo actuation system and consisted of actuators, hydraulic power supply system, hydraulic power distribution system and control system. In case of hydraulic power supply system, we use EMDP(Electric Motor Driven Pump) to supply hydraulic power. Generally, we use brushed DC motor for EMDP but it is not easy to operate EMDP using brushed DC motor at a high altitude. Hence, we are developing EMDP using brushless DC motor to use at a high altitude. In this study, we will explain control system for BLDC motor to drive hydraulic pump.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.4
• /
• pp.52-64
• /
• 2010

This study was carried out to analyze the occurrence characteristics and the influence of forest environment factors on the debris flow of 3 national parks in korea. The results obtained from this study were summarized as follows; The total number of debris flow occurrence was 125 areas. The average length of the debris flow scar was 144m, average width was 20m. And the average area and sediment were $2,854m^2$ and $3,959m^3$ respectively. The factors influencing the debris flow were highly occurred in Metamorphic rock, mixed forest type. And also, slope gradient was $30{\sim}35^{\circ}$, aspect was NE, altitude was over 1,000m, vertical and cross slope was concave (凹), soil depth was below 15cm, stream order was 0 order. The variables of cross slope (complex), deciduous tree, soil depth (over 46cm), cross slope (concave), mixed forest type and altitude (801~1200m) in correlation analysis were significant at 1 % level. The landslide of high mountain area highly tend to change the debris flow in stream bed of torrent. The debris flow in national parks mainly occurred in high mountain area with long ridge and steep slope.

• Journal of Digital Contents Society
• /
• v.9 no.1
• /
• pp.87-99
• /
• 2008

High Altitude Platform network systems utilize Unmanned Aerial Vehicle as routers for ground node communication. For this purpose, geographical clustering of ground nodes must be required. In this paper, we assume mobile ground nodes over wide area and the clusters composed of ground nodes are identified. UAVs can be positioned at the point of centroid of clusters. The number of UAVs are derived from the area size and the number of ground nodes deployed in that area. From the simulation and application of clustering algorithms, we showed visual clustering results with dynamic variance of number of ground nodes.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.43-50
• /
• 2011

The only practical way to measure wind resource at high-altitude over 100 m above ground for a feasibility study on a high-rise building integrated wind turbine might be ground-based remote sensing. The remote-sensing campaign was performed at a 145 m-building roof in Jamsil where is a center of metropolitan city Seoul. The campaign aimed uncertainty assessment of Leosphere WindCube LIDAR and Scintec MPAS SODAR through a mutual comparison. Compared with LIDAR, the data availability of SODAR was about 2/3 at 550 m altitude while both showed over 90% under 400 m, and it is shown that the data availability decrease may bring a distortion of statistical analysis. The wind speed measurement of SODAR was fitted to a slope of 0.92 and $R^2$ of 0.90 to the LIDAR measurement. The relative standard deviation of wind speed difference and standard deviation of wind direction difference were evaluated to be 30% and 20 degrees, respectively over the whole measurement heights.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.867-873
• /
• 2008

Model based virtual Flight Control System construction is essential for Fly-by-Wire Flight Control System verification & validation(V&V) of concurrent engineering base. We researched the concept of dual-architecture system for virtual system construction, and analyzed Flight Control System that is applied to high altitude long endurance(HAE) UAS. Finally, we constructed the model based virtual Flight Control System with system analysis and achieved system verification about flight critical failure modes. Analysis target is RQ-4A.