• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.647-651
• /
• 2016

SiC films were prepared on glassy carbon substrates by laser chemical vapor deposition under a high pressure of $10^4Pa$ using a diode laser (wavelength = 808 nm) and a polysilaethylene precursor. (111)-oriented SiC films were formed at a deposition temperature ($T_{dep}$) range of 1150 - 1422 K. At $T_{dep}=1262K$, the SiC film with a high Lotgering factor of above 0.96 showed an exhibited pyramid-like surface morphology and flower-like grains. The highest deposition rate ($R_{dep}$) was $220{\mu}m\;h^{-1}$ at $T_{dep}=1262K$.

• Solar Energy
• /
• v.6 no.2
• /
• pp.3-14
• /
• 1986

It is desirable to collect the solar thermal energy at relatively high temperature in order to minimize the size of thermal storage system and to enlarge the scope of solar thermal energy utilization. In this study, to develop a solar collector that has both advantages of collecting solar thermal energy at high temperature and fixing conveniently the collector system for long term period, a cylindrical parabolique concentrating solar collector (M.C.P.C.S.C) was designed, which has several rows of parabolique reflectors and thin thickness such as the flat-plate solar collector, maintaining the optical form of concentrating solar collector. The thermal performance of the M.C.P.C.S.C. newly designed in this study was analysed theoretically and experimentally. The results are summarized as follows: 1) prediction equation for outlet temperature, $T_o$, of heat transfer fluid and for the thermal efficiency, ${\eta}$, of the collector were derived as; o $$T_o=[C+B1_n(\frac{I_c(t)}{pv^3})]T_i$$ o $${\eta}=\frac{A}{A_c}\dot{m}[(C-1)+B1_n(E{\cdot}di^6\frac{I_c(t)}{\dot{m}^3})]\frac{T_i}{I_c(t)}$$ 2) When the insolation on the tilted solar collector surface, $I_c$, was $900-950W/m^2$ and the heat transfer fluid was not circulated in tubular absorber, the maximum temperature on the absorber surface was $100-118^{\circ}C$, this result suggested that the heat transfer fluid could be heated up to $98-116^{\circ}C$. The maximum temperature on the absorber surface was decreased with the increase of the collector shape factor, $L_p/L_w$ 3) There was a good agreement between the experimental and theoretical value of solar collector efficiency, ${\eta}$, which was proportional to the collector shape factor, $L_p/L_w$ 4) It is desirable to continue the study on the relationship between the collector shape factor, $L_p/L_w$, and the thermal efficiency of solar collector.

• Journal of Life Science
• /
• v.19 no.5
• /
• pp.664-670
• /
• 2009

The ${\beta}$3-adrenergic receptor (ADRB3) is expressed mainly in visceral adipose tissue and is thought to contribute to lipolysis and the delivery of free fatty acids to the portal vein. This study was aimed at evaluating the association between high-density lipoprotein cholesterol (HDL-C) and ADRB3 genetic polymophisms. A total of 991 healthy examinees who were examined in a university hospital, located in Busan City, between May and December 2006 were enrolled in this study. Height, weight, body mass index, waist circumference, and systolic and diastolic blood pressures of the subjects were examined. Intravenous concentrations of fasting blood glucose, total cholesterol, HDL-C, low-density lipoprotein cholesterol, and triglyceride were also measured. After extracting DNA from the subjects, mutations of the +188T>C (Trp64Arg) of exon 1 and +3893T>C of intron 2 on the ADRB3 gene were genotyped using the single base extension method. We have identified a novel mutation of ADRB3 that is located in intron 2. The frequency of its minor allele was 0.164. Both the +188T>C mutation of exon 1 and +3893T>C mutation of intron 2 were significantly associated with HDL-C. The mean concentration of serum HDL-C was significantly lower in the presence of their minor allele 'C'. These results suggest that both mutations of +188T>C of exon 1 and +3895T>C of intron 2 have significant associations with HDL-C in the Korean population.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.290-299
• /
• 2010

The bioactive effects of ethanol extracts from fly maggot (ME) on reduction of plasma lipids levels in rats fed high-fat diets (Expt. Ⅰ), and on liver function recovery of hepatotoxicity rats by intraperitoneal injection of carbon tetrachloride ($CCl_4$) or by orally administration of alcohol (Expt. II) were investigated. In expt. I, twenty seven, male rat SDS(sprague dawley strain) were randomly assigned to three treated groups, including normal control group, HF (group with high fat diets which have no extracts) and HFE (HF plus orally administered doses of ME extract at 5.0 mg/100g of body weight). In expt. II, forty five, male rats (SDS) were randomly assigned to each of the five groups: T1 (control), T2 (intraperitoneal injection of $CCl_4$), T3 (intraperitoneal injection of $CCl_4$ after orally administered with ME), T4 (orally administered with combination of ME and alcohol), T5 (orally administration of ME after orally administered with alcohol). There were significant decreases in plasma (TAG), (TC), (LDL-C) in the HFE group with orally administered doses of ME at 5.0 mg/100g of body weight, respectively, however, the (HDL-C) were significantly increased in HFE group as compared to HF group with high fat diets which have no extracts (p<0.05). The levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), ${\gamma}$-glutamyl transferse(${\gamma}$-GTP) and bilirubin were highest in T2 or T3, and high in order T4 or T5, and lowest in T1 except for bilirubin which has same with T4, T5 (p<0.05). The high recovery of liver damage by $CCl_4$ from the light microscopic appearance was observed in rats (T3) with extracts, and also high in T4 than T5 by orally administrated with alcohol. In conclusion, the ethanol extracts from fly maggot may have a bioactive effects to prevent for human lipids disorder and alcoholic disease.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.286-291
• /
• 2016

This study was carried out to evaluate the feasibility of air-stripping by DIWS(Dip Injection Wet Scrubber) system on high concentration of ammonia wastewater more than 10,000 mg/L. In the case of changing temperature from $30^{\circ}C$ to $70^{\circ}C$ maintaining pH 12.5 within the 72 hours, the removal efficiency of T-N by the present treatment plant was increased to 90.5% which was initially kept 70.3%. Although the high concentration of T-N with 9,120~12,955 mg/L was treated by micro-bubble through DIWS system maintaining the temperature of $30^{\circ}C$ within the 20 hours, the removal efficiency of T-N reached 91.9%, which indicated the possibility of air-stripping.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1186-1191
• /
• 2004

ZnO varistor ceramics which were fabricated with variation of added of 0.5～1.0 mol% Co$_3$O$_4$, were sintered at 1150 $^{\circ}C$. In the specimen added 0.7 mol% Co$_3$O$_4$, sintered density was 6.03 g/㎤ and electrical properties were superior to any other compositions. The nonlinear coefficient a and clamping voltage ratio were 83 and 1.35, respectively. But, endurance surge current in the specimen added 0.5 mol% Co$_3$O$_4$ was 7000 A/$\textrm{cm}^2$, and deviation of varistor voltage was Δ-3.23 %. As P.C.T and T.C.T environmental test were succeed in all specimens, and deviation of varistor voltage in the specimen added 0.6 mol% Co$_3$O$_4$ was Δ-0.81 %. All specimens showed good leakage current property on the High Temperature Continuous Load Test(HTCLT) for 1000 hr at 85 $^{\circ}C$ and variation rate of the varistor voltage below Δ-2.0 %.

• Preventive Nutrition and Food Science
• /
• v.2 no.4
• /
• pp.333-337
• /
• 1997

Trans-cinnamic acid-4-hydroxylase(tC4H) is the first cytochrome P450-dependent monooxygenase of the phenylpropanoid pathway. The roots of avocado seedlings were wounded and examined to determine whether the tC4H would be activated in response to wounding and/or whether tC4H activity be modulated by the application of exogenous p-coumarate. At the specified length of times, the wounded and treated roots were either frozen in liquid nitrogen or used immediately to extract microsomal proteins. The microsomal proteins were subjected to immunoblot analysis using polyclonal antibodies against CYP73 of tC4H gene. In this study, tC4H was induced in wounded roots sealed in bags within 6 hours, and in low level({TEX}$10^{-8}${/TEX}M) of p-coumarate solution within 24 hours, whereas the olution without p-coumarate and high levels of p-coumarate solution repressed tC4H induction in wounded roots. These results indicate that tC4H is induced by wounding in the root of avocado, and is inhibited by the application of exogenous p-coumarate.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.121-126
• /
• 2003

The single layer direct-coupled YBCO SQUID magnetometers have been fabricated and characterized for the purpose of the measurement of weak magnetic signals in unshielded environment. Two types of magnetometers have been designed and fabricated using 10 mm$\times$ 10 mm substrates. We could operate the conventional 3-mm-wide solid pickup loop magnetometers more stably than the 12-parallel-line pickup loop magnetometers in laboratory environment. We developed a first-order electronic gradiometer system using the SQUID sensors with axial displacement of 80 mm without any mechanical alignment of magnetometers. The system with a software filter using calculation of discrete Fourier transform could record clearly weak pulse signal of 100 pT in a magnetically disturbed environment.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.600-604
• /
• 1996

High-T$_{c}$, superconducting wire is very important element for the application of electrical power systems. But it is very difficult to develope the long high T, wire with excellent properties. BiSrCaCuO multi-layer tapes are fabricated by a rolling method and pressing method sintered for several step at 840.deg. C. The critical current densities of 637 filament multi-layer tapes sintering 100 hours fabricated by the rolling method and pressing method are 1.3*10$^{4}$ A/cm$^{2}$ and 5.5*10$^{3}$ A/cm$^{2}$. The critical cur-rent densites of multi-layer tapes made by rolling method are found to be better than those fabricated by the powder-in-tube method and pressing process. As result, the rolling method is the best way to fabricated the multi-layer filament.t.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.609-617
• /
• 2011

There is a trend towards the progressive use of higher operating temperatures and stresses to achieve improved efficiencies in power-generation equipment. It is important to perform the crack assessment under hightemperature and high-pressure conditions. The C(t)-integral is a key parameter in crack assessment for transient creep states. The estimation of the C(t)-integral is complex when considering the mechanical and thermal loads simultaneously. In this paper, we study estimation of C(t)-integral under combined mechanical and thermal load depending on loading conditions.