• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2006

Purpose: The purpose of this study is to find a optimal beam spoiler condition on the dose distribution near the surface, when treating a squamous cell carcinoma of the head and neck and a lymphatic region with 10 MV photon beam. The use of a optimal spoiler allows elivering high dose to a superficial tumor volume, while maintaining the skin-sparing effect in the area between the surface to the depth of 0.4 cm. Materials and Methods: The lucite beam spoiler, which were a tissue equivalent, were made and placed between the surface and the photon collimators of linear accelerator. The surface-dose, the dose at the depth of 0.4 cm, and the maximum dose at the dmax were measured with a parallel-plate ionization chamber for $5{\times}5cm\;to\;30{\times}30cm^2$ field sizes using lucite spoilers with different thicknesses at varying skin-to-spoiler separation (SSS). In the same condition, the dose was measured with bolus and compared with beam spoiler. Results: The spoiler increased the surface and build-up dose and shifted the depth of maximum dose toward the surface. With a 10 MV x-ray beam and a optimal beam spoiler when treating a patient, a similer build-up dose with a 6 MV photon beam could be achieved, while maintaining a certain amount of skin spring. But it was provided higher surface dose under SSS of less than 5 cm, the spoiler thickness of more than 1.8 cm or more, and larger field size than $20{\times}20cm^2$ provided higher surface dose like bolus and obliterated the spin-sparing effect. the effects of the beam spoiler on beam profile was reduced with increasing depths. Conclusion: The lucite spoiler allowed using of a 10 MV photon beam for the radiation treatment of head and neck caner by yielding secondary scattered electron on the surface. The dose at superficial depth was increased and the depth of maximum dose was moved to near the skin surface. Spoiling the 10 MV x-ray beam resulted in treatment plans that maintained dose homogeneity without the consequence of increased skin reaction or treat volume underdose for regions near the skin surface. In this, the optimal spoiler thickeness of 1.2 cm and 1.8 cm were found at SSS of 7 cm for $10{\times}10cm^2$ field. The surface doses were measured 60% and 64% respectively. In addition, It showed so optimal that 94% and 94% at the depth of 0.4 cm and dmax respectively.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.5
• /
• pp.289-296
• /
• 2001

The main objective of this topic is to establish strategies and to plan biotechnology researches which are related to the agricultural improvements especially focusing on the crop breeding in Korea. From 1960's to 1980's government policy had been emphasized to develope high yielding cultivars for the self sufficient supply of the staple food crops. As a result, considerable increase of rice production has been made with accumulating technology and man's powers. Recently genetically modified crops harboring useful characteristics have been developed using biotechnology and released in the developed countries. National research institutes and private companies have been developed biotechnology researches to establish competitive capabilities, however they have not been successfully used in commercialization. Therefore it is necessary to promote the practical. application by connecting molecular technology with conventional breeding. Proposed research projects are; (1) basic researches including plant genome studies, (2) developing new cultivars through gene transformation, (3) screening and producing antioxidants, secondary metabolite substances and edible vaccines. To set a government policy, both domestic and international research trends were reviewed and possibility of success based on the economic view point were discussed. The intellectual property and preservation of environment play a key role to decide the research priority. It is also necessary for us to make one step system for the distribution of research resources such as microorganisms, genes cloned, plant seeds and research informations for promoting research activities.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.57-81
• /
• 2008

Knowledge is an essential strategic weapon for sustaining competitive advantage and is the key determinant for organizational growth. When knowledge is shared and disseminated throughout the organization, it increases an organization's value by providing the ability to respond to new and unusual situations. The growing importance of knowledge as a critical resource has forced executives to pay attention to their organizational knowledge. Organizations are increasingly undertaking knowledge management initiatives and making significant investments. Knowledge sourcing is considered as the first important step in effective knowledge management. Most firms continue to make an effort to realize the benefits of knowledge management by using various knowledge sources effectively. Appropriate knowledge sourcing strategies enable organizations to create, acquire, and access knowledge in a timely manner by reducing search and transfer costs, which result in better firm performance. In response, the knowledge management literature has devoted substantial attention to the analysis of knowledge sourcing strategies. Many studies have categorized knowledge sourcing strategies into intemal- and external-oriented. Internal-oriented sourcing strategy attempts to increase firm performance by integrating knowledge within the boundary of the firm. On the contrary, external-oriented strategy attempts to bring knowledge in from outside sources via either acquisition or imitation, and then to transfer that knowledge across to the organization. However, the extant literature on knowledge sourcing strategies focuses primarily on large organizations. Although many studies have clearly highlighted major differences between large and small firms and the need to adopt different strategies for different firm sizes, scant attention has been given to analyzing how knowledge sourcing strategies affect firm performance in small firms and what are the differences between small and large firms in the patterns of knowledge sourcing strategies adoption. This study attempts to advance the current literature by examining the impact of knowledge sourcing strategies on small firm performance from a holistic perspective. By drawing on knowledge based theory from organization science and complementarity theory from the economics literature, this paper is motivated by the following questions: (1) what are the adoption patterns of different knowledge sourcing strategies in small firms (i,e., what sourcing strategies should be adopted and which sourcing strategies work well together in small firms)?; and (2) what are the performance implications of these adoption patterns? In order to answer the questions, this study developed three hypotheses. First hypothesis based on knowledge based theory is that internal-oriented knowledge sourcing is positively associated with small firm performance. Second hypothesis developed on the basis of knowledge based theory is that external-oriented knowledge sourcing is positively associated with small firm performance. The third one based on complementarity theory is that pursuing both internal- and external-oriented knowledge sourcing simultaneously is negatively or less positively associated with small firm performance. As a sampling frame, 700 firms were identified from the Annual Corporation Report in Korea. Survey questionnaires were mailed to owners or executives who were most erudite about the firm s knowledge sourcing strategies and performance. A total of 188 companies replied, yielding a response rate of 26.8%. Due to incomplete data, 12 responses were eliminated, leaving 176 responses for the final analysis. Since all independent variables were measured using continuous variables, supermodularity function was used to test the hypotheses based on the cross partial derivative of payoff function. The results indicated no significant impact of internal-oriented sourcing strategies while positive impact of external-oriented sourcing strategy on small firm performance. This intriguing result could be explained on the basis of various resource and capital constraints of small firms. Small firms typically have restricted financial and human resources. They do not have enough assets to always develop knowledge internally. Another possible explanation is competency traps or core rigidities. Building up a knowledge base based on internal knowledge creates core competences, but at the same time, excessive internal focused knowledge exploration leads to behaviors blind to other knowledge. Interestingly, this study found that Internal- and external-oriented knowledge sourcing strategies had a substitutive relationship, which was inconsistent with previous studies that suggested complementary relationship between them. This result might be explained using organizational identification theory. Internal organizational members may perceive external knowledge as a threat, and tend to ignore knowledge from external sources because they prefer to maintain their own knowledge, legitimacy, and homogeneous attitudes. Therefore, integrating knowledge from internal and external sources might not be effective, resulting in failure of improvements of firm performance. Another possible explanation is small firms resource and capital constraints and lack of management expertise and absorptive capacity. Although the integration of different knowledge sources is critical, high levels of knowledge sourcing in many areas are quite expensive and so are often unrealistic for small enterprises. This study provides several implications for research as well as practice. First this study extends the existing knowledge by examining the substitutability (and complementarity) of knowledge sourcing strategies. Most prior studies have tended to investigate the independent effects of these strategies on performance without considering their combined impacts. Furthermore, this study tests complementarity based on the productivity approach that has been considered as a definitive test method for complementarity. Second, this study sheds new light on knowledge management research by identifying the relationship between knowledge sourcing strategies and small firm performance. Most current literature has insisted complementary relationship between knowledge sourcing strategies on the basis of data from large firms. Contrary to the conventional wisdom, this study identifies substitutive relationship between knowledge sourcing strategies using data from small firms. Third, implications for practice highlight that managers of small firms should focus on knowledge sourcing from external-oriented strategies. Moreover, adoption of both sourcing strategies simultaneousiy impedes small firm performance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2015

"Nokyang" (Hordeum vulgare L.), a new whole-crop silage barley cultivar, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, RDA, Korea in 2012. It was derived from combining "Nagyoung" and breeding line "SB77368-B-145". Among the combinations made in 2001, a promising line, "SB01T2017", showed good characteristics in terms of potential forage yield in the yield trial at Iksan from 2007 to 2009. In 2009, the promising line was designated as "Iksan457" and placed in regional yield trials at six locations around Korea for three years from 2010 to 2012, and was released under the name of "Nokyang." It has the growth habit of a group III creeping plant type, with a light-green leaf and common spike. Its average heading and maturing dates were on May 6 and June 4, respectively, which were later than cultivar "Youngyang." "Nokyang" also showed strong winter hardiness, and a resistance to shattering and barley yellow mosaic virus (BaYMV) similar to those of the check cultivar. The best thing among the traits of one is a new good quality with the plant green at the latter growing period. The average forage dry matter (DM) yields in the regional yield trial were about 12.8 and 11.5 MT $ha^{-1}$ in upland and paddy field, respectively, which were higher than those of the check cultivar, by 7% and 2%, respectively. This cultivar would be suitable for an area of the Korean peninsula where the daily minimum temperature in January is above $-8^{\circ}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.3
• /
• pp.213-220
• /
• 2002

The growth characteristics, forage yields and nutritive values of heading and headless types of sorghum $\times$ sudangrass(Sorghum bicolar L.) hybrids were examined to evaluate the adaptability of new cultivars at Suwon and Chunahn for two years from 2000 to 2001 in a randomized complete block design with three replications. Eleven cultivars of heading type and 4 cultivars of headless type were used in this study. The dry matter(DM) yield of AG 2501 was highest in the heading type cultivars, and PAC F8350 in the headless type cultivars, respectively. The DM yields of heading types were slightly higher than those of headless types but there were not significantly different. Early growth and regrowth characteristics of heading type was highest in AG 2501 and GW 9110G, respectively. GW 9110G and DMD were early heading types, and AG 2501 and GW 9161F were middle heading types. AG 2501 was longest and GW 9161F was shortest in plant height. Cultivars with long leaf length were appeared to be larger fur leaf width and stem diameter. Brix content was highest in DMD as 9.7%, and disease and insect resistances were not significantly different among the heading types. Early growth of headless type cultivar, PAC F8350 was slightly lower than that of Jumbo but stronger in regrowth, wider in leaf width and stem diameter, and stronger in lodging. Comparisons of growth characters between heading and headless types of cultivars were not easy in general but between them, brix contents of heading types ranging from 6.7 to 7.9% were greatly higher than those of headless types ranging from 3.6 to 3.9%. Nutritive values such as crude protein, ADF, NDF and digestibility of headless type cultivars were higher than those of heading types. In conclusion, of heading type cultivars, GW 9110G, AG 2501, DMD and GW 9161F, and of headless type cultivars, Jumbo and PAC F8350 were recommended as high yielding cultivars with good adaptability in domestic environment.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.87-93
• /
• 2014

Multiple cropping system is an important agricultural system in Korea, which is significant to increase forage yield and promote agricultural economic development. This experiment was carried out to develop triple cropping systems (winter cereals crop for forage - silage corn - summer oats) for maximum year-around forage production at paddy field in southern region. We also to select a winter forage crop to determine corn planting time, and to examine the forage productivity and feed value of summer cultivated oat, which was planted after corn cultivation. When winter cereal crops for forages are harvested in accordance with and corn planter, the fresh yield and dry matter yield of rye were 32.0 ton/ha and 5.8 ton/ha, respectively, showing higher yielding compared to other winter crops. Corn silage as summer crop was showed the fresh yield and dry matter yield of 72.1 ton/ha and 20.2 ton/ha, respectively. In the feed value, crude protein and TDN contents were 7.4% and 69.3%, respectively. They was showed higher productivity and feed value. The heading date of High-speed oat was October 10, and its fresh yield and dry matter yield were 37.6 ton/ha and 8.0 ton/ha, respectively. As a feed value, crude protein and TDN content was 11.4% and 59.1%, respectively. Therefore, triple cropping systems for the production of forage all throughout the year are possible with the introduction of summer oats in the southern region, and rye could be the most suitable winter forage crops for triple cropping systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.28-34
• /
• 2017

A new naked oat cultivar, 'Jungmo2005'(Avena nuda L.), was developed for food and forage use by National Institute of Crop Science, RDA in 2010. It was derived from a cross between $F_1$['Early80'/'Gwiri33'] and $F_1$['Early80'/'Gwiri23']. 'Early80', a covered oats, has early heading and high yielding, while 'Gwiri23' of covered type and 'Gwiri33' of naked type has early heading with large-size grain. 'Jungmo2005' has the characteristics of narrow and long leaves of pale green color, middle diameter culm of yellow color and medium grain of whitish yellow color. Cultivar 'Jungmo2005' had 2 days earlier heading date (May 9) than the check cultivar 'Seonyang' (May 11) in field condition. The 'Jungmo2005' showed better winter hardiness than that of the check cultivar, and similar to the check cultivar in respect to lodging resistance. The 'Jungmo2005' had 105 cm of culm length, 21.5 cm of spike length, 658 spikes per $m^2$, 82 grains per spike, 23.3 g of 1,000-grain weight, and 622 g of test weight. The grain yield of 'Jungmo2005' was averaged $3.38MT\;ha^{-1}$, which was 6% higher than that of the check. Average forage fresh and dry matter yield of 'Jungmo2005' harvested at milk-ripe stage were 44.8 and $12.6tone\;ha^{-1}$, respectively, compared with 47.5 and $12.5tone\;ha^{-1}$ of the check. The protein content of the 'Jungmo2005' was similar to the check (7.6% and 7.5%, respectively), while ADF (28.6%) and NDF (51.5%) were lower than the check (31.4% and 57.0%, respectively). TDN content and RFV were higher than those of the check (66.3%, 120.3 and 64.1, 105.2, respectively). 'Jungmo2005' is recommended for fall sowing cropping only in the south area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and it should not be cultivated in mountain areas, where frost damages is likely to occur. The areas would do better only to sow in spring season.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.125-131
• /
• 2017

'Saeyoung', a winter triticale (X Triticosecale Wittmack) for forage, was developed at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2012. The cultivar 'Saeyoung' has narrow and long leaves of light green color, middle size and thin culm, and a medium grain of brown color. The heading date and yellow ripe stage of 'Saeyoung' was May 3 and May 27, which were similar to check cultivar 'Shinyoung', respectively. 'Saeyoung' showed a little stronger in cold tolerance and a little weaker in resistance to lodging than the check, and wet injury, powdery mildew, and leaf rust were similar to those of the check cultivar. The forage fresh and dry matter yields of 'Saeyoung' at milk-ripe stages were 47.2 and $15.6MT\;ha^{-1}$, respectively, which was 9% and 4% higher than those of the check. The crude protein content of 'Saeyoung' was 0.4% lower than 6.8% of the check, while was higher than the check cultivar 'Shinyoung' in neutral detergent fiber, acid detergent fiber. Total digestible nutrients of 'Saeyoung' was also 3% lower than 62.8% of the check cultivar. It showed grain yield of $4.1MT\;ha^{-1}$, which was 11% higher than that of the check. 'Saeyoung' is recommended for fall sowing forage crops in areas in which average daily minimum mean temperatures in January are higher than $-10^{\circ}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.207-216
• /
• 2004

This study was carried out to select the promising forage crops for forage production in paddy field of NLRI, RDA, Suwon from 1999 to 2001. The species of forage crop used in this experiment were barley(3 varieties), wheat(2), rye(3) and Italian ryegrass(IRG, 3). Stages of heading, milk and yellow ripe of barley were 1 May, middle May and late May, respectively. In milk to yellow ripe stage, dry matter(DM) and total digestible nutrient(TDN) yield of barley were $7.30{\sim}9.58$ MT and $4.75{\sim}6.24$ MT per ha, and Albori was the most promising variety among the barley. The growth of wheat was a little late compared to that of barley. but it seemed to be crop having higher forage yield and nutritive value. In milk to yellow stage, DM and TDN yield of wheat were $8.17{\sim}10.82$ MT and $5.33{\sim}7.31$ MT per ha. Heading stage of rye was 27 to 29 April, and it seemed to be suitable for harvest at heading to flowering stage because of heavy lodging after flowering. In flowering stage, DM and TDN yield of rye were 10.18 and 6.03 MT per ha. Heading stage of early maturing IRG was 7 May and it seemed to be good for harvest at flowering stage of middle May in cropping system. In flowering stage, DM and TDN yield of early type IRG were 4.48 and 2.96 MT per ha. The results demonstrated that the promising forage crops for forage production in paddy. field were rye and barley(Albori) in Middle region, and rye harvesting at early May was recommended when considered middle May of rice transplanting period, and rye and barley considered late May of rice planting period. Also early maturing and high yielding IRG variety was strongly needed.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.275-283
• /
• 2012

Steel Plate for Rebar Connection was recently developed to splice rebars in delayed slab-wall joints in high-rise building, slurry wall-slab joints, temporary openings, etc. It consists of several couplers and a thin steel plate with shear key. Cyclic loading tests on slab-wall joints were conducted to verify structural behavior of the joints having Steel Plate for Rebar Connection. For comparison, joints with Rebend Connection and without splices were also tested. The joints with Steel Plate for Rebar Connection showed typical flexural behavior in the sequence of tension re-bar yielding, sufficient flexural deformation, crushing of compression concrete, and compression rebar buckling. However, the joints with Rebend Connection had more bond cracks in slabs faces and spalling in side cover-concrete, even though elastic behavior of the joints was similar to that of the joints with Steel Plate for Re-bar Connection. Consequently, the joints with Rebend Connection had less strengths and deformation capacities than the joints with Steel Plate for Re-bar Connection. In addition, stiffness of the joints with Rebend Connection degraded more rapidly than the other joints as cyclic loads were applied. This may be caused by low elastic modulus of re-straightened rebars and restraightening of kinked bar. For two types of diameters (13mm and 16mm) and two types of grades (SD300 and SD400) of rebars, the joints with Steel Plate for Rebar Connection had higher strength than nominal strength calculated from actual material properties. On the contrary, strengths of the joints with Rebend Connection decreased as bar diameter increased and as grade becames higher. Therefore, Rebend Connection should be used with caution in design and construction.