• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.137-148
• /
• 2017

The present study examined the effect of stimulus contrast and color on detection of a target embedded in streams of letters. In Experiment 1, each trial displayed four rapid serial visual presentation (RSVP) streams of letters (i.e., multi-RSVP), and each stream occupied one of four different locations. Each frame in the RSVP stream had four white distractors at the locations except one frame where a dim grey target was displayed at a location with three white distractors at the remaining locations. In the low-visibility target condition, the target's grey color was slightly darker than the background grey whereas much dimmer in the high-visibility condition. Participants were asked to report presence of a predesignated target as quickly and accurately as possible upon its detection in each trial, and their target detection turned out more accurate and quicker in the high-visibility than the low-visibility condition. In Experiment 2, the same RSVP displays and task as Experiment were used, but the grey target letters in the high-visibility condition were replaced with those of distinct chromatic colors. Participants detected target presence more accurately in the high-visibility condition, but the reaction time did not differ between the visibility conditions. The results indicate that higher stimulus contrast as well as distinct color can improve perception of a target stimulus displayed among visually-demanding background, but also suggest that stimulus contrast may play a more substantial role for such perceptual improvement.

• Korean Journal of Cognitive Science
• /
• v.27 no.2
• /
• pp.275-301
• /
• 2016

Attentional blink (AB) refers to the phenomena where conscious report for a target (T2) subsequent to the first target (T1) in a stream of items under rapid serial visual presentation (RSVP) becomes difficult if the T2 follows no later than 500ms after the T1. The present study examined the effect of T1 visibility on T2 AB strength according to the bottleneck account proposing that the amount of allocated resources for T1 memory consolidation determines the strength of AB against T2. In the low-visibility condition, the T1 had a gray color for a low stimulus contrast against the black background whereas had a bright and saturated color in the high-visibility condition. In both visibility conditions, the T1 was also highly distinct from the remaining distractors. A multi-RSVP method was also used for increasing location uncertainty of the targets supposedly consuming on average attentional resources for the targets. Two experiments revealed that AB strength was more intense in the low-visibility than high-visibility condition, and the pattern of difference went more pronounced if T2 visibility was improved. The results indicate that T1 visibility can affect more strongly when attentional resources are relatively lacking for resolving the T1 bottleneck, and support for the bottleneck account proposing that the level of T1's visibility can determine the intensity of the T1 bottleneck.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.73-84
• /
• 2010

This paper is to analyze effectiveness and efficiency of topographic features in visibility analysis. For this research aim, this paper compares the analysis results of topographic features and relationships between topographic features and their visibility analysis on surfaces. This paper employs peak, pass, pit, ridge and valley features from the topographic features for which five areas including mountain and plain areas in Britain are selected and their DEM data are generated. The summaries of the analysis results are as follows: Firstly, it is clear that relationship between high elevation points and their visibility is not highly correlated. This means that highly elevated points are not necessarily better visible areas and they are not suitable for searching for large visible areas. Secondly, the positions that can see large visible areas are highly correlated with their elevation and are distributed within a certain range which has small deviation of their correlation between visibility and elevation. This means that to search for large visible areas, it is necessary to employ the positions located at relatively high elevation area. Thirdly, for all of the five areas, the visibility results of the topographic features are compared with maximal visibility resulted from a while surface areas, and it is identified that topographic features show similar visibility performances of that maximal visibility. From the results stated above, it can be inferred that topographic features and its topographic characteristics are enable to be a research motivation to the visibility analysis topics. Furthermore, the results of this paper can be contributed to explore suitable variables and factors for solving multiple viewshed problems.

• Korean Institute of Interior Design Journal
• /
• v.27 no.3
• /
• pp.14-23
• /
• 2018

The spatial planning of the elderly care facility plans is analyzed using space syntax in terms of encouraging the social interaction of the residents in this study. First, through the visibility graph analysis, openness and accessibility of space is analysed. Second, the walking behavior of residents through agent analysis model is simulated. Third, the space planning methods for the elderly care facilities are proposed based on the results. The results are as follows. According to the visibility graph analysis, the main corridor has high visual openness and high accessibility. The visual openness and accessibility of the unit living room, where social interaction among residents is possible in each unit, is low. Space planning is needed to increase direct protection and observation of employees to the unit living room. The location of the nurse station that manages the entire floor needs to be located where the openness and accessibility is most high. The nursing station should have a high degree of connectivity to the entire space, so that any accidents can be managed and contact is accessible. Through the agent simulation the flow from the center to each unit space is highest in the corridor space and the inflow to the private rooms and the living room are similar. Therefore, it is necessary to plan the accessibility of the unit living room more for the natural inflow of residents.

• Atmosphere
• /
• v.29 no.4
• /
• pp.439-450
• /
• 2019

Present weather plays an important role not only for atmospheric sciences but also for public welfare and road safety. While the widely used state-of-the-art visibility and present weather sensor yields present weather, a single type of measurement is far from perfect to replace long history of human-eye based observation. Truly automatic present weather observation enables us to increase spatial resolution by an order of magnitude with existing facilities in Korea. 8 years of human-eyed present weather records in 19 sites over Korea are compared with visibility sensors and auxiliary measurements, such as humidity of AWS. As clear condition agrees with high probability, next best categories follow fog, rain, snow, mist, haze and drizzle in comparison with human-eyed observation. Fog, mist and haze are often confused due to nature of machine sensing visibility. Such ambiguous weather conditions are improved with empirically induced criteria in combination with visibility and humidity. Differences between instrument manufacturers are also found indicating nonstandard present weather decision. Analysis shows manufacturer dependent present weather differences are induced by manufacturer's own algorithms, not by visibility measurement. Accuracies of present weather for haze, mist, and fog are all improved by 61.5%, 44.9%, and 26.9% respectively. The result shows that automatic present weather sensing is feasible for operational purpose with minimal human interactions if appropriate algorithm is applied. Further study is ongoing for impact of different sensing types between manufacturers for both visibility and present weather data.

• Journal of The Korean Astronomical Society
• /
• v.41 no.3
• /
• pp.77-81
• /
• 2008

As a continuation of a previous work by Park et al. (2006), we have developed a two-element radio interferometer that can measure both the phase and amplitude of a visibility function. Two small radio telescopes with diameters of 2.3 m are used as before, but this time an external reference oscillator is shared by the two telescopes so that the local oscillator frequencies are identical. We do not use a hardware correlator; instead we record signals from the two telescopes onto a PC and then perform software correlation. Complex visibilities are obtained toward the sun at ${\lambda}\;=\;21\;cm$, for 24 baselines with the use of the earth rotation and positional changes of one element, where the maximum baseline length projected onto UV plane is ${\sim}\;90{\lambda}$. As expected, the visibility amplitude decreases with the baseline length, while the phase is almost constant. The image obtained by the Fourier transformation of the visibility function nicely delineates the sun, which is barely resolved due to the limited baseline length. The experiment demonstrates that this system can be used as a "toy" interferometer at least for the education of (under)graduate students.

• International Journal of High-Rise Buildings
• /
• v.12 no.1
• /
• pp.83-91
• /
• 2023

Under the dual pressure of population growth and land shortage, threedimensional development is the inevitable choice for cities in China. In such a scenario, a mixed-use complex has considerable potential in its realization and research. Based on space syntax and the three-dimensional visibility graph analysis, this paper describes the spatial and functional layout of the Shanghai Super Brand Mall and studies the relationship between spatial visibility and user behaviour through linear regression analysis and correlation analysis. This paper studies three different types of user behaviour, namely, path selection, staying selection, and store selection, and finds that spatial visibility and accessibility have different effects on user behaviour depending on the type and purpose of the activity. This paper reveals the influence of spatial and functional layout on user behaviour and puts forward the corresponding design strategy under the three-dimensional environment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.78-86
• /
• 2011

The recovering of historical mountain fortress needs the maintenance of forest scape for achieving visibility. In the study, the methods for the maintenance of the forest around the fortress were proposed. The Cumulative Visibility Analysis and Multiple Sight Surface Analysis were tested to verify the methods using GIS on the Myeong-hwal Fortress in Kyungju. The results of the study are as follows. First, the Cumulative Visibility Analysis was made on the Myeong-hwal Fortress from surrounding major viewpoints. The Cumulative Visibility Analysis enables the selection of excellent visibility sectors on the fortress. The 6 excellent visibility sectors were 1,937m(which occupied 41.2% of the area). Second, two cases of pine tree height were compared in the Cumulative Visibility Analysis. One used the average height of pines and the other used the maximum growth height. The comparative result demonstrated that the case of average height would be more effective for deciding the pine removal zone as well as achieving visibility to the mountain fortress. Third, to examine the feasibility of the management method, the tree removal plan and removal execution were compared on the A zone which showed high visibility frequency. Asa comparative result, there was insignificant difference(3.3%) in area between the tree removal plan($10,935m^2$) and removal execution($11,296m^2$). This study proved the Cumulative Visibility Analysis and Multiple Sight Surface Analysis to be effective for forest scape maintenance around a mountain fortress.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.1-14
• /
• 2013

This study is about the evaluation of the color arrangements of working clothes that are harmonized with working environment and assist in the protection of workers in industrial sites. This study attempted color arrangement design with the intention of giving order to the colors of working environment and working clothes so as to help improve the safety of work and the management aspects including human resource management, efficiency improvement, and the practice of business ethics. The study method consisted of literature research, empirical research, and evaluation research. The literature research performed theoretical examination about colors, industrial safety, and visibility. Three actual outdoor work sites in the machine industry were chosen and pictures were taken at 20-30 m from workers. The background colors of the work environment of each work site and the colors of the working clothes that were actually worn were analyzed through color values measured with a color-difference meter(CR-400). As a result, it was found that between value and chroma which affect visibility, color arrangement based on differences in chroma could be a greater influence than color arrangement based on differences in value. The results of this study could assist the integration of color schemes among working environment colors, people and working clothes by suggesting color arrangements with improved visibility that are applicable to the working clothes of domestic machine manufacturers that are playing a pivotal role in domestic industries and by presenting appropriate guidelines.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.288-301
• /
• 2021

The purpose of this study was to verify the degree of visibility of FOLED (fiber optic light-emitting diode) materials applied to safety-enhancing clothes of micro-mobility users during the day and night by conducting an empirical test targeting 50 people in their teens, 20's, 30's, 40's, and 50's or older. First, the results of the visibility test at 10 m-intervals from 10 to 70 m based on the clothes sample showed that the light detection of FOLED material was very good without daytime or night-time distinction. Second, the results of directional sign detection of FOLED were confirmed to be very high without any daytime or night. Third, the results of identifying a pictogram design showed that the distance was shorter than that of light detection or directional indication. However, the FOLED pictogram design could be confirmed at a distance of 50 m or less. Therefore, if a clothes product using FOLED material is worn and micro-mobility is used, the experimental results indicate that safety will be sufficiently secured due to the excellent visibility.