• Journal of the Korea Organic Resources Recycling Association
• /
• v.28 no.1
• /
• pp.27-36
• /
• 2020

The study was compared for growth and yield of cherry tomato (Lycopersicon esculentum var. cerasiforme) crops as affected by various homemade liquid fertilizer (LF), commonly applied in the environmentally friendly farmhouses. LF treatment included UT (untreatment, water), OC (oil cake), BF (bone+fish meal), FA (fish amino meal), SO (sesame oil meal), and SF (starfish). Seasonal pH and EC in SO- and SF-LF rapidly decreased at 30 days after the storage, which were the highest EC of 0.6 - 0.8 dS/m, followed by BF-LF with 0.4 dS/m EC. T-N concentration in LF was the highest on the SF (0.0062%), followed by SO (0.0059%) and BF materials (0.0030%), which were all the great for the K concentration in the LF. P and Ca concentrations were the highest on the FA-LF, with the highest Mg concentration observed on the vegetable SO-LF. Soil EC was the highest on the SF-LF plots of 0.74 dS/m, with no significant differences between the treatments observed on the macro-nutrient concentrations in the soil and leaf. Leaf dry weight, leaf temperature, stem diameter, and plant height were investigated at once per 15 days. UT-LF reduced the leaf dry weight at all the measurement time while the plant height was low at an initial measurement but increased and similar to the other homemade LF treatments at a later measurement. Fruit yield and average fruit weight were the lowest on the UT-LF plots at 75 days after fertigation. Fruit diameter was increased by the BF-LF and SF-LF, with the highest fruit soluble solid contents and fruit coloring observed on the FA-LF. BF-LF maintained high fruit firmness.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.332-339
• /
• 2015

Nitrogen removal is one of the most important issues about wastewater treatment because nitrogen is a primary pollutant caused various problems such as eutrophication. We developed a CANON microbial community by using AOB and ANAMMOX bacteria as seeding sources. When 100 mg-N/L of influent ammonium was supplied, the DO above 0.4 mg/L showed a very low TN removal efficiency while the DO of 0.3 mg/L showed TN removal efficiency as high as 71.3%. When the influent ammonium concentration was reduced to 50 mg/L, TN removal efficiency drastically deceased. However, TN removal efficiency was recovered to above 70% after 14 day operation when the influent nitrogen concentration was changed again from 50 mg-N/L to 100 mg-N/L. According to the operating temperature from $37{\pm}1^{\circ}C$ to $20{\pm}1^{\circ}C$, TN removal efficiency also rapidly decreased but gradually increased again up to $70.0{\pm}2.6$%. The analysis of PCR-DGGE showed no substantial difference in microbial community structures under different operational conditions. This suggests that if CANON sludge is once successfully developed from a mixture of AOB and ANAMMOX bacteria, the microbial community can be stably maintained regardless of the changes in operational conditions.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.1
• /
• pp.57-63
• /
• 2013

A combined process consisted of a biofilm reactor and a continuously stirred-tank reactor (CSTR) was investigated for highly loaded ammonium wastewater treatment via nitrite accumulation. To enhance ammonium oxidizing bacteria over nitrite oxidizing bacteria on the surface of carriers, the biofilm reactor was operated at temperature of $35^{\circ}C$ for more than three months but the influent ammonium (500 mg-N/L) was partially oxidized to nitrite (240 mg-N/L). As pH was increased from 7.5 to 8.0, nitrite accumulation was fully achieved due to the inhibition of nitrite oxidizing bacteria under high free ammonia concentration. The biofilm reactor performance was severely deteriorated at the hydraulic retention time of 12 hr, at which incomplete nitrification of ammonia was observed. Various solubilization methods were applied to sewage sludge for enhancing its biodegradability and the combined method, alkaline followed by ultrasonic, gave the highest solubilization efficiency (58%); the solubilized solution was used as the external carbon source for denitrification reaction in CSTR. FISH analysis showed that the dominant microorganisms on the carriers were ammonium oxidizing bacteria such as Nitrosomonas spp. and Nitrospirar spp. but low amounts of nitrite oxidizing bacteria as Nitrobacter spp. was also detected.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.75-79
• /
• 2010

The precursor powders with thin wall structure were prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux. The $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution without organic additives and flux material had sizes of $1{\sim}5{\mu}m$ and hollow structure with high thickness at post-treatment temperature of $1,200^{\circ}C$. However, $BaMgAl_{10}O_{17}:Eu$ phosphor powders formed from the spray solution with ethylenediaminetetraacetic acid, citric acid and $NH_4Cl$ flux had fine size and plate-like shape. The mean crystallite sizes of the phosphor powders with fine sizes were 23, 35, and 33 nm when the content of $NH_4Cl$ flux were 0, 6, 35 wt% of phosphor. The photoluminescence intensity of the phosphor powders formed from the spray solution with the optimum amount of $NH_4Cl$ flux as 35 wt% was 215% of that of the phosphor powders formed from the spray solution without flux material.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.327-331
• /
• 2010

Porcine placenta was treated with alkali, acid and enzyme treatment to obtain extracts. Heavy metal contents such as Pb, As, and Hg were low enough to satisfy cosmetic agent standard. As a result of safety test(MTT assay), porcine placenta extracts showed over 80% of cell viability at $50{\mu}g/ml$, and cell toxicity was relatively lower. From antioxidation test using DPPH free radical scavenging assay, antioxidation effect was highest as 63% at $50{\mu}g/ml$ when porcine placenta was treated with alkali in pH 9. From whitening effect test using tyrosinase inhibition assay, tyrosinase inhibition effect was 30% at $50{\mu}g/ml$ concentration in alkali treated procine placenta, however, the efficiency was lower compared with arbutin or vitamin C. In anti-wrinkle effect test from elastase inhibition assay, elastase inhibition effects were 20~30% at $50{\mu}g/ml$ for 5 kinds of porcine placenta treatments, which was superior to standard, and especially, protease treated extracts showed best results. Skin formulation including 1% porcine placenta was made and the formulation was very stable for temperature and storage period. From this research, porcine placenta extract showed high potential for anti-wrinkle functional cosmetic agent.

• Korean Journal of Weed Science
• /
• v.14 no.4
• /
• pp.239-244
• /
• 1994

As a fundamental study to control Alopeuclus aequalis Sobol. var. amurensis(Kom.) Ohwi., on dominant weed in barley and dry seeded rice cultivation on paddy fields, several factors which would have closer relations to its germination and emergence, were examined. The results are as follows. The dormancy of seeds were broken at dry-heat treatment of $30^{\circ}C$. The germination rate of the seeds was high in order of 15>10>20> $5^{\circ}C$ and was very low at more than $25^{\circ}C$. The emergence of A. aequalis was influenced little for the light, but had a tendency to be good on the dark condition. The seeds dried on room temperature germinated few but them treated on $30^{\circ}C$ for 24 hours were germinated over 80%. The A. aequalis occured few in the saline soil of salt concentration of more than 0.25% and the germination rate of seeds was very low on the over 0.5% solution of NaCl. On the solution of pH 6.0~12.0, the germination was not effected for pH but was very few on pH 2.0. At the paddy-lowland which have cultivated the soybean for three years A. aequalis emerged a few.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.5
• /
• pp.359-364
• /
• 2012

This study were carried out to find bolting response of cultivation in different regions and to isolate FLC (FLOWERING LOCUS C) homologs in Angelica gigas Nakai. The mean temperature of different regions, ordering in altitude, were as follows: 100 m > 350 m > 530 m > 700 m. The largest amount of rainfall was occurred in the region of 350 m while the longest time of sunshine was occurred in the region of 100 m. The content of soil chemical properties in regions showed pH 6.2 ~ 7.4, T-N 0.17 ~ 26, organic mater $1{\sim}32gkg^{-1}$, $P_2O_5$ ${151{\sim}664_{mgkg}}^{-1}$, exchangeable potassium and calcium and magnesium were 0.78 ~ 1.15, 3.9 ~ 10.0, ${0.7{\sim}3.2_{cmol}}^{+kg-1}$. L5 line of A. gigas was occurred in bolting at all regions, but the bolting ratio was 60.0% in 700 m region with non-mulching treatment. Manchu of A. gigas was not occurred in bolting at all regions. The accumulation bolting ratio of L5 line by non-mulching was higher than that of mulching as 90.4% and 72.8% in 100 m region. The MADS-box transcription factor FLC is one of the well-known examples as a strong floral repressor. We decided to isolate FLC homologs from A. gigas as a starting point of flowering mechanism research of this plant. We have isolated two RT-PCR products which showed very high amino acid sequence homology to Arabidopsis FLC.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.589-594
• /
• 2006

The recycling of industrial wastes in the concrete manufacturing is of increasing interest worldwide, due to the high environmental impact of the cement and concrete industries and to the rising demand of infrastructures, both in industrialized and developing countries. The production of municipal wastes in the South Korea is estimated at about 49,902 ton per day and only 14.5% of these are incinerated and principally disposed of in landfill. These quantities will increase considerably with the growth of municipal waste production, the progressive closing of landfill, so the disposal of municipal solid waste incinerator(MSWI) ashes has become a continuous and significant issue facing society, both environmentally and economically. MSWI ash is the residue from waste combustion processes at temperature between $850^{\circ}C\;and\;1,000^{\circ}C$. And the main components of MSWI ash are $SiO_2,\;CaO\;and\;Al_2O_3$. The aim of this study is to find a way to useful application of MSWI ash(after treatment) as a structural material and to investigates the hydraulic activity, compressive strength development composition variation of such alkali-activated MSWI ashes concrete. And it was found that early cement hydration, followed by the breakdown and dissolving of the MSWI-ashes, enhanced the formation of calcium silicate hydrates(C-S-H). The XRD and SEM-EDS results indicate that, both the hydration degree and strength development are closely connected with a curing condition and a alkali-activator. Compressive strengths with values in the 40.5 MPa were obtained after curing the activated MSWI ashes with NaOH+water glass at $90^{\circ}C$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.4
• /
• pp.225-232
• /
• 1999

The $Mg_2Ni$ hydrogen storage alloys which have much higher theoretical discharge capacity than $AB_5$ and $AB_2$ type alloys were synthesized by mechanical alloying with some additives and subjected to the electrochemical measurements. Two different processes were employed to the synthesis of $Mg_2Ni$ alloys with using the high energy ball mill SPEX 8000. One was only ball milling, 12 hrs, the Mg and Ni powders for 12 hrs with additives such as $AB_5$, Ni, Co and Cu powders. In the other process the Mg and Ni powders were ball milled for 1 hr first and then heat treated at $300{\sim}400^{\circ}C$ for 1 hr to get $Mg_2Ni$ alloy, and finally the $Mg_2Ni$ alloy powders were ball milled with the additives for 12 hrs. The alloy powders prepared were compacted at room temperature under $7.64tons/cm^2$ into disk type electrodes for the electrochemical measurements. The experimntal results showed that the electrodes prepared with the heat treated alloy powders had a higher discharge capacities than those without heat treatment. The addition of Ni caused an increase of the discharge capacity and the addition of Co improved the cycling characteristics. The electrode prepared by ball milling of $Mg_2Ni$ and 10wt% Ni powders has showed the highest discharge capacity, 546mAh/g.alloy, which was 55% of the theoretical capacity.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.616-620
• /
• 2005

The morphology and photoluminescence characteristics of green light emitting hexaaluminate phosphor particles prepared by high temperature spray pyrolysis from spray solution with and without ammonium dihydrogen phosphate flux were investigated. The particles prepared from spray solution without flux material had hollow morphology at preparation temperatures between $900^{\circ}C$ and $1,650^{\circ}C$. Ammonium dihydrogen phosphate flux added into spray solution enabled the formation of particles with spherical shape and filled morphology at preparation temperatures between $900^{\circ}C$ and $1,650^{\circ}C$. The hexaaluminate phosphor particles with magnetoplumbite structure were directly prepared by spray pyrolysis from spray solution with ammonium dihydrogen phosphate flux above $1,600^{\circ}C$. Ammonium dihydrogen phosphate flux was effective in improving the photoluminescence intensity of the phosphor particles at low preparation temperatures. The phosphor particles prepared from spray solution with and without flux material by spray pyrolysis under reducing atmosphere at $1,650^{\circ}C$ had comparable photoluminescence intensities with that of the phosphor particles optimized by post-treatment.