사출성형은 다양한 형태의 제품을 대량 생산할 수 있는 플라스틱 성형 공법중의 하나이다. 플라스틱 제품을 만들기 위해서는 고상의 재료를 액상으로 녹인 후 다시 고상으로 굳히는 과정을 거치는 데, 이 과정 중에 많은 문제점들이 발생을 하게 된다. 과거에는 이러한 문제를 해결하기 위해서 성형 후 금형 설계 변경 등의 시행착오적 방법을 사용하였으나, 성형과정에 대한 사출성형 CAE(Computer Aided Engineering)를 적용함으로써, 사전에 문제점을 파악하는 기술이 도입되었다. 플라스틱 제품의 큰 문제점 중 하나가 치수안정성이다. 특히 박막사출성형품은 게이트의 위치, 냉각채널과 온도에 따라서 변형량이 크게 달라진다. 본 연구에서는 현재 Stackmold방식으로 4개의 Cavity에 4개의 Hot-Runner가 설치된 금형을 통해 생산중인 DVD Tray 박막사출제품의 생산 원가 절감을 위해서 Cavity하나에 한 개의 Hot-Runner를 설계하기 위해서 CAE 해석을 통해 게이트의 위치, 냉각채널과 온도에 따라 비교하여 해석해 최적의 제품 설계를 하였다. CAE 해석에는 상업화된 CAE 프로그램인 Moldflow를 사용하였고, 수지는 PC+ABS를 사용하였다.
While there are plenty of studies on synthesizing semiconducting germanium nanowires (Ge NWs) by vapor-liquid-solid (VLS) process, it is difficult to inject dopants into them with uniform dopants distribution due to vapor-solid (VS) deposition. In particular, as precursors and dopants such as germane ($GeH_4$), phosphine ($PH_3$) or diborane ($B_2H_6$) incorporate through sidewall of nanowire, it is hard to obtain the structural and electrical uniformity of Ge NWs. Moreover, the drastic tapered structure of Ge NWs is observed when it is synthesized at high temperature over $400^{\circ}C$ because of excessive VS deposition. In 2006, Emanuel Tutuc et al. demonstrated Ge NW pn junction using p-type shell as depleted layer. However, it could not be prevented from undesirable VS deposition and it still kept the tapered structures of Ge NWs as a result. Herein, we adopt $C_2H_2$ gas in order to passivate Ge NWs with carbon sheath, which makes the entire Ge NWs uniform at even higher temperature over $450^{\circ}C$. We can also synthesize non-tapered and uniformly doped Ge NWs, restricting incorporation of excess germanium on the surface. The Ge NWs with carbon sheath are grown via VLS process on a $Si/SiO_2$ substrate coated 2 nm Au film. Thin Au film is thermally evaporated on a $Si/SiO_2$ substrate. The NW is grown flowing $GeH_4$, HCl, $C_2H_2$ and PH3 for n-type, $B_2H_6$ for p-type at a total pressure of 15 Torr and temperatures of $480{\sim}500^{\circ}C$. Scanning electron microscopy (SEM) reveals clear surface of the Ge NWs synthesized at $500^{\circ}C$. Raman spectroscopy peaked at about ~300 $cm^{-1}$ indicates it is comprised of single crystalline germanium in the core of Ge NWs and it is proved to be covered by thin amorphous carbon by two peaks of 1330 $cm^{-1}$ (D-band) and 1590 $cm^{-1}$ (G-band). Furthermore, the electrical performances of Ge NWs doped with boron and phosphorus are measured by field effect transistor (FET) and they shows typical curves of p-type and n-type FET. It is expected to have general potentials for development of logic devices and solar cells using p-type and n-type Ge NWs with carbon sheath.
본 연구에서는 저자등이 분리한 바 있는 Streptomyces griseolus가 분비한 xylose 이성화 효소(D-xylose ketol isomerase, EC 5.3.1.5, 포도당 이성화 효소)의 고정화 및 이 고정화 효소에 의한 파일롯트 규모의 이성화당 생산에의 응용을 시도하였다. 세포내 분비된 Xylose 이성화 효소를 함유한 미생물 균체를 호모 게나이저로 $500kg/cm^2$압력하에 파쇄한 결과 원 효소 역가의 98.8%가 얻어졌고, lysozyme으로 분해 했을 때는 54.7%가 얻어졌다. 이 효소의 고정화를 위한 담체로서는 Diaion HP 20, Duolite A-7, Amberlite IRA 93 및 94와 같은 포리스형 수지류가 효과적임이 밝혀졌고, Amberlite IRA 93에 대한 재생 형태는 $BO_4--$가, Diaion HP 20에 대해서는 $HCO_3-$가 효과적이었다. Amberline IRA 93에 대한 고정화 최적 조건은 pH 8.0에 $55^{\circ}C$로서 80.6%의 효소 고저오하 수율을 나타내었으며 효소 활성 반감기는 $65^{\circ}C$에서 24일 이상이었다. Amberlite IRA 93에 효소를 탈착(脫着) 실험한 결과, 담체는 재 사용이 가능 하였으며 2,3,4,5회째의 효소의 재 고정화율은 각각 98.2, 93.3, 90.7 및 87.5%를 나타내었다. 고정화 효소의 최적 반응 온도는 $60{\sim}70^{\circ}C$로 원효소의 경우에 비하여 다소 낮아지면서 폭이 넓어졌으며, 최적 pH는 $8.0{\sim}8.3$으로 알카리 쪽으로 이동하였다. 파일롯트 규모로 본 고정화 효소 충전탑(내경 30cm, 높이 85cm)에 의한 이성화당의 생산을 시도하였던바, 고정화 효소(350 IXIU/ml-R) 1리터가 30일동안에 약 293리터의 이성화당을 생산할 수 있는 것으로 나타났다.
Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).
본 총설은 부화 후 1주일간 급여되는 초이사료 적용의 필요성 및 배합설계방안을 제시하여 육계생산성을 증대하는 방안을 살펴보고자 한다. 육계는 지난 수년 간 괄목할 만한 증체 속도 증가, 출하일령 단축 그리고 사료효율 향상을 보 여줬다. 이는 육종 개량, 사육 환경 개선, 과학적인 사양관리기법 적용 및 적정 영양공급 등의 결과이며, 한국의 경우 다른 나라에 비해 육계사육기간이 매우 짧아, 부화 후 약 31일령이면 출하가 이루어지고 있는 실정이다. 따라서 육계초기 1주일간은 전체 사육기간의 20% 이상을 차지할 뿐만 아니라, 초기성장이 출하체중과 일령 그리고 사료효율에 지대한 영향을 미치고 있으므로 초기 1주일간의 사료공급을 통한 생산성 향상이 매우 중요하다. 생후 7일령까지의 어린 병아리는 소화기관 미발달과 효소의 분비 및 활력 부족으로 사료 내 영양소의 소화 흡수 및 이용률이 낮은 편임을 고려하여, 초이사료의 급여를 위한 영양적 접근 방법으로는 크게 3가지로 나눌 수 있다. 첫 번째로는 단순히 영양수준을 올리기보다는 양질의 원료 사용, 특히 단백질과 탄수화물 이용률 증진을 위 한 선택적인 원료 사용 및 원료의 가공처리가 필요하다. 에너지 공급의 경우, 에너지 수준 못지않게 에너지 공급원이 중요한데, 특히 불포화지방산공급원인 식물성이 기름 첨가를 권장한다. 영양소 공급의 경우, 단백질 함량을 증가시키기보다는 이상적 아미노산 비율에 따른 필수아미노산 공급이 중요하다. 필요 시 효소제를 비롯한 항생제 등의 대체 물질 첨가를 통해 항병력이나 소화흡수율을 향상시키는 방안을 고려해 볼 수 있다. 아울러 기타 제한 아미노산의 충족에 대한 연구와 부화 후 7일간 사료 내 전해질 균형의 영향에 대한 연구가 앞으로 필요하다.
Circulatory and respiratory activities were observed in men exposed to the environment of engine room of a cruising Republic of Korea Navy ship and compared to the control values obtained in an ordinary laboratory room on land. The environment of an engine room of cruising navy ship was presumed to be a multiple stress acting on men. The environment of the engine room included high temperature $(35-42^{\circ}C)$, low relative humidity (20-38% saturation), vibration (about 7 cycles per second), rolling and pitching of ship and noises. Sixteen men were divided into two groups consisted of each 8 subjects. Subjects of sea duty group had experience of continuous on board duty averaging 3.5 years. Men of land duty group had no experience of on board activity. On land observations were made on one day prior to the boarding and leaving the port and four days after landing. In between observations in the engine room were made on the first, 5 th, 9 th, 12 th, and 14 th day of on board activity. The whole experimental period lasted for 20 days. Measurements on circulatory and respiratory parameters were at standing resting state (after 30 minutes standing in the case of on land study and 15 minutes in engine room study) and within one minute after cessation of on the spot running of which rhythm was 30/min. and lasted for 5 minutes. Oxygen consumption and pulmonary function test were done in the period of two minutes from the 3rd to 5th minutes of running. The following results were obtained. 1. Body temperature showed no change regardless of group difference or on land or on board measurements. 2. Pulse rate increased markedly after boarding the ship id both groups. Pulse rate increased from the first day on board at rest and after exercise as compared to the on land control value. This increase in pulse rate was more marked after exercise. Sea duty group showed less increase in pulse rate at rest than the land duty group. Standing and resting pulse rate of sea duty group on lam was 81 and increased to 87 at the 5th day on board and remained smaller than the land duty group throughout the period on board. Control standing and resting pulse rate of land duty group on land was 76 and reached 89 at the 9th day on board and thereafter decreased a little. Pulse rate of land duty group at rest on board remained greater than that of sea duty group throughout the period on board. 3. Systolic blood pressure of sea duty group increased after boarding the ship and remained higher than the control value on land. In the land duty group, however, systolic blood pressure decreased during the period on board the ship. Diastolic blood pressure decreased in both groups. 4. Resting breathing rate of land duty group increased and remained higher than the control value on land. In sea duty group, however, resting breathing rate showed a transient increase on the 1st day on board and decreased thereafter to the control value on land and kept the same level throughout the period of cruise. Absolute value of breathing rate in the sea duty group was greater than the land duty group both at rest and after exercise. 5. There was a lowering of breathing efficiency in both groups. Thus, increases in tidal volume and minute ventilation volume and decreases in maximum breathing capacity, vital capacity, capacity ratio and air velocity Index were observed after boarding the ship. An increase in ventilation equivalent was also observed in both groups. The lowering of breathing efficiency was more marked in the land duty group than the sea duty group. 6. Energy expediture increased in both groups during their stay on the ship and was more marked in the sea duty group. 7, Lactate concentration in venous blood at rest and after exercise increased after boarding the ship and no group difference was observed.
$Ta_2O_5$박막은 고유전율의 특성으로 차세대 DRAM캐패시터 물질로 유망받고 있는 물질이다. 본 연구에서는 p-type(100)Si 웨이퍼 위에 열 MOCVD 방법으로 $Ta_2O_5$박막을 성장시켰으며 기판온도, 버블러 온도, 반응압력의 조업조건이 미치는 영향을 고찰하엿다. 증착된 박막은 SEM, XRD, XPS, FT-IR, AES, TEM, AFM을 이용하여 분석하였으며 질소나 산소 분위기의 furnace 열처리 (FA)와 RTA(Rapid Thermal Annealing)를 통하여 열처리 효과를 살펴보았다. 반응온도에 따른 증착속도는 300 ~ $400 ^{\circ}C$ 범위에서 18.46kcal/mol의 활성화 에너지를 가지는 표면반응 율속단계와 400 ~ $450^{\circ}C$ 범위에서 1.9kcal/mol의 활성화 에너지를 가지는 물질전단 율속단계로 구분되었다. 버블러 온도는 $140^{\circ}C$일때 최대의 증착속도를 보였다. 반응압력에 따른 증착속도는 3torr에서 최대의 증착속도를 보였으나 굴절율은 0.1-1torr사이에 $Ta_2O_5$의 bulk값과 비슷한 2.1정도의 양호한 값이 얻어졌다. $400^{\circ}C$에서 층덮힘은 85.71%로 매우 양호하게 나타났으며 몬테카를로법에 의한 전산모사 결과와의 비교에 의해서 부착계수는 0.06으로 나타났다. FT-IR, AES, TEM 분석결과에 의하여 Si와 $Ta_2O_5$ 박막 계면의 산화막 두께는 FA-$O_{2}$ > RTA-$O_{2}$ ~ FA-$N_{2}$ > RTA-$N_{2}$ 순으로 성장하였다. 하지만 질소분위기에서 열처리한 박막은 산소분위기의 열처리경우에 비해 박막내의 산소성분의 부족으로 인한 그레인 사이의 결함이 많이 관찰되었다.
한반도의 페름-삼첩기 송림 조산운동은 유라시아 동쪽 경계부에서 복잡한 충돌현상을 포함한 주요 지구조운동이다. 이번 연구는 기존의 송림 조산운동의 변성/변형작용의 특징을 토대로 태백산분지에서 송림조산운동의 특징과 시기에 대해서 알아보고, 또한 최대 압축운동(bulk crustal shortening) 방향, 변성 온도-압력 그리고 온도-시간 경로를 비교 분석하여 옥천 변성대와 임진강 변성대에서의 송림 조산운동의 변성/변형작용을 대비하고자 한다. 태백산분지 북동부 지역에 분포하는 평안누층군은 퇴적된 이후 초기에 저온/중압형 광역변성작용과 후기에 중생대 화강암 관입과 연관된 접촉변성작용으로 특징 지워진다. 중압형 광역변성작용은 2개의 시계방향 온도-압력-변형 경로 고리(loop)를 보이며, 4회의 변형작용($D_1-D_4$)을 수반한다. 첫 번째 고리는 약 $400-500^{\circ}C$, 1.5-3.0 kbar에서 $D_1$과 $D_2$ 변형작용과 관련되며 syn-$D_1$ 경녹니석, syn-$D_1$ 홍주석, post-$D_1$ 마가라이트, Ca이 풍부한 syn-$D_2$ 또는 post-$D_2$ 사장석의 형성에 영향을 주었다. 그리고 두 번째 고리는 약 $520-580^{\circ}C$, 2.0-6.0 kbar에서 $D_3$과 $D_4$ 변형작용과 관련되며, syn-$D_3$ 석류석과 십자석의 형성과 syn-$D_4$ 또는 post-$D_4$ 홍주석의 재성장으로 정의된다. syn-$D_1$ 경녹니석과 홍주석은 E-W 방향의 최대 압축운동 동안에 성장하였으며, 반면에 syn-$D_3$ 석류석과 십자석 그리고 syn-$D_4$ 또는 post-$D_4$ 홍주석 반상변정은 N-S 최대 압축운동 동안에 형성되었다. 기존의 옥천분지와 임진강 변성대에서의 변성작용과 최대 압축운동 방향에 대한 연구결과를 비교해 보면, 최고 변성 온도-압력 조건은 한반도 동쪽(태백산분지)에서 서쪽(임진강 변성대와 경기육괴 남서부 지역)으로 감에 따라 증가하는 경향을 보인다. 또한 E-W 방향의 최대 압축 운동은 송림 조산운동 초기 동안에 옥천 변성대의 동부 지역에 영향을 주었고, N-S 방향의 최대 압축 운동은 송림 조산운동 후기 동안에 임진강 변성대와 옥천변성대 지역에 영향을 준 변형작용의 결과로 판단된다. 결론적으로 페름기 후기에서부터 삼첩기 동안 한반도에 영향을 준 송림 조산운동은 북중국-남중국 지괴의 충돌작용 뿐만 아니라 유라시아 동쪽부에 분포했던 소규모 지괴들의 봉합(amalgamation) (예, 중한 지괴와 히다-오키 지괴의 충돌)에 대비될 수 있음을 시사한다.
태양전지 제조공정에서 열처리로 레이저를 사용하는 도핑공정은 태양전지의 성능을 결정짓는 중요한 요소이다. 그러나 퍼니스를 이용하는 공정에서는 선택적으로 고농도(Heavy) 도핑영역을 형성하기가 어렵다. 레이저를 사용한 선택적 도핑의 경우 고가의 레이저 장비가 요구되어지며, 레이저 도핑 후 고온의 에너지로 인한 웨이퍼의 구조적 손상 문제가 발생된다. 본 연구는 저가이면서 코로나 방전 구조의 대기압 플라즈마 소스를 제작하였고, 이를 통한 선택적 도핑에 관한 연구를 하였다. 대기압 플라즈마 제트는 Ar 가스를 주입하여 수십 kHz 주파수를 인가하여 플라즈마를 발생시키는 구조로 제작하였다. P-type 웨이퍼(Cz)에 인(P)이 shallow 도핑 된(120 Ohm/square) PSG (Phosphorus Silicate Glass)가 제거되지 않은 웨이퍼를 사용하였다. 대기압 플라즈마 도핑 공정 처리시간은 15 s와 30 s이며, 플라즈마 전류는 40 mA와 70 mA로 처리하였다. 웨이퍼의 도핑프로파일은 SIMS (Secondary Ion Mass Spectroscopy)측정을 통하여 분석하였으며, 도핑프로파일로 전기적 특성인 면저항(sheet resistance)을 파악하였다. 도펀트로 사용된 PSG에 대기압 플라즈마 제트로 도핑공정을 처리한 결과 전류와 플라즈마 처리시간이 증가됨에 따라 도핑깊이가 깊어지고, 면저항이 향상하였다. 대기압 플라즈마 도핑 후 웨이퍼의 표면구조 손상파악을 위한 SEM (Scanning Electron Microscopy) 측정결과 도핑 전과 후 웨이퍼의 표면구조는 차이가 없음을 확인하였으며, 대기압 플라즈마 도핑 폭도 전류와 플라즈마 처리시간이 증가됨에 따라 증가하였다.
대기오염 중 악취는 인간의 생활이나 활동, 건강에 직·간접적으로 영향을 주어 사회적 환경문제로 인식되고 있다. 악취물질 중 NH3(암모니아), H2S(황화수소), C6H6(벤젠)은 석유화학공장, 공공하수처리시설 및 분뇨처리시설, 가축분뇨 처리시설, 폐기물 처리시설과 음식물류 처리시설에 등에서 대량으로 발생하므로 효율적인 악취 제거가 필요한 실정이다. 본 연구에서는 대기압 플라즈마를 이용한 악취 제거와 제거효율을 연구하였다. 가스크로마토그래피(Gas Chromatography, GC)와 악취측정장치를 이용하여 대기압 플라즈마와 악취물질 반응 전후의 농도를 측정하였다. 측정결과를 백분율로 환산하여 효율을 평가하였다. 플라즈마를 이용한 악취 분해는 플라즈마를 방전시킬 때 생성된 활성라디칼과 O3(오존)을 이용하여 악취물질을 중화처리 및 광화학적으로 산화하는 기전을 이용한 것으로 상온에서 악취 물질의 처리가 가능하며, 2차 오염물질의 발생이 없다는 장점이 있다. NH3, H2S, C6H6 3가지 악취 물질 모두 대기압 플라즈마의 출력을 500 W로 방전시켜 반응시켰을 때 모두 1분 내로 악취 물질이 완전히 분해되었다. 따라서 고농도의 악취 물질과 두 종류 이상의 냄새유발 물질이 반응할 때 발생한 복합악취 또한 대기압 플라즈마를 이용하여 제거할 수 있다고 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.