• 사물인터넷융복합논문지
• /
• 제10권2호
• /
• pp.125-130
• /
• 2024

모빌리티 기술의 급격한 성장으로 산업 분야의 수요는 차량 내에 다양한 장비와 센서의 데이터를 안정적으로 처리할 수 있는 저장장치를 요구하고 있다. NAND 플래시 메모리는 외부에 강한 충격뿐만 아니라 저전력, 빠른 데이터 처리 속도의 장점이 있기 때문에 모빌리티 환경의 저장장치로 활용되고 있다. 그러나 플래시 메모리는 고온에 장기 노출될 경우 데이터 손상이 발생할 수 있는 특징이 있다. 따라서 태양 복사열 등 날씨나 외부 열원에 의한 고온 노출이 빈번한 모빌리티 환경에서는 온도를 관리하기 위한 전용 시스템이 필요하다. 본 논문은 모빌리티 환경에서 저장장치 온도 관리하기 위한 전용 온도 관리 시스템을 설계한다. 설계한 온도 관리 시스템은 전통적인 공기 냉각 방식과 수 냉각방식의 기술을 하이브리드로 적용하였다. 냉각 방식은 저장장치의 온도에 따라 적응형으로 동작하도록 설계하였으며, 온도 단계가 낮을 경우 동작하지 않도록 설계하여 에너지 효율을 높였다. 마지막으로 실험을 통해 각 냉각방식과 방열재질의 차이 따른 온도 차이를 분석하였고, 온도 관리 정책이 성능을 유지하는데 효과가 있음을 증명하였다.

• Journal of Plant Biology
• /
• 제38권4호
• /
• pp.373-380
• /
• 1995

$25^{\circ}C,\;100\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$의 광량 조건에서 25일 동안 키운 고추의 제 1엽에서 광억제를 유도하였다. $25^{\circ}C에서\;0~3000\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$의 광량으로 0~70분 동안 처리하여 얻은 photon exposure [mol photons.m-2, 광량과 빛 조사 시간의 곱, Bell과 Rose (1981)]에 대한 산소 발생의 광양자 수율과 QA 환원의 광화학 효율(형광 파라미터 Fv/Fm)을 조사하여 광계II 기능의 변화를 조사하였다. Photon exposure가 증가함에 따라 산소 발생의 광양자 수율은 곡선적으로, Fv/Fm은 일치 직선형으로 감소하였는데, 각각은 $5.5\;mol\;photons{\cdot}m^{-2},\;10\;mol\;photons{\cdot}m^{-2}$에서 광계II의 활성이 50% 감소하였다. 저온($15^{\circ}C$)과 고온($45^{\circ}C$)에서 광합선능을 조사하였을 때 저온에서는 광양자수율과 Fv/Fm 비율의 변화가 거의 없었으나 고온에서는 이들의 감소가 뚜렷하게 일어났다. 그러나 빛과 온도를 함께 처리하였을 경우, 저온과 고온조건 모두에서 현저한 광억제가 일어났다. 이로 미루어 보아 저온과 고온에서 나타나는 광억제의 촉진 현상은 서로 다른 메카니즘을 통해 일어나는 것으로 사료된다.

• Plant Breeding and Biotechnology
• /
• 제6권4호
• /
• pp.363-380
• /
• 2018

Wheat is frequently exposed to high temperature during anthesis and ripening period, which resulted in yield loss and detrimental end-use-quality. The transcriptome analysis of wheat under high temperature stress during the early stage of the grain filling period was undertaken. Three expression patterns of differentially expressed genes (DEGs) during grain filling period were identified. The DEGs of seed storage protein and starch-branching enzyme showed continuous increases in their expressions during high temperature stress, as well as during the recovery period. The activities of the enzymes responsible for the elimination of antioxidants were significantly affected by exposure to high temperature stress. Only the WAS-2 family genes showed increased transcription levels under high temperature stress in dehulled spikelets. The relative transcription levels for sub-genome specific WAS-2 genes suggested that WAS-2 genes reacted with over-expression under high temperature stress and decreased back to normal expression during recovery. We propose the role of WAS-2 as a protective mechanism during the stage of grain development under high temperature in spikelets.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.216-216
• /
• 2012

The interaction of hydrogen with ZnO single crystal surfaces, ZnO (0001), ZnO (000-1), and ZnO (10-10) has been investigated using temperature programmed desorption (TPD) and X-ray photoelectron Spectroscopy (XPS) techniques. When the ZnO single crystal surfaces are exposed to atomic hydrogen at 200 K, all three surfaces show hydrogen desorption at 450 K. ZnO (0001) surface shows hydrogen desorption feature at ~260 K as the hydrogen exposure is increased. The ZnO (10-10) surface shows low-temperature desorption feature first and the high-temperature desorption feature appears as the hydrogen exposure increases. The ZnO (000-1) surface does not show any lower temperature hydrogen desorption. We will report the adsorption configuration of hydrogen atoms on ZnO single crystal surfaces with different surfaces structures.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.325-331
• /
• 2023

Background: Heat stress is a harmful physical hazard in many occupational settings. However, consequences of occupational heat exposure among workers in a sugarcane factory in Ethiopia are not well characterized. This study aimed to assess the level of occupational heat exposure-related symptoms and contributing factors. Methods: In this cross-sectional study, five workstations were selected for temperature measurement. Heat stress levels were measured using a wet-bulb globe temperature index meter. A stratified random sampling technique was used to select 1,524 participants. Heat-related symptoms were assessed using validated questionnaires. Results: The level of occupational heat exposure was 72.4% (95% CI: 70.2%-74.8%), while 71.6% (95% CI: 69.3%-74.9%) of participants experienced at least one symptom related to heat stress. The most common heat-related symptoms were swelling of hands and feet (78%), severe thirst (77.8%) and dry mouth (77.4%). The identified risk factors were a lack of reflective shields (AOR: 2.20, 95% CI: 1.53, 3.17), not-enclosed extreme heat sources (AOR: 1.76, 95% CI: 1.23, 2.51), a lack of access to shade (AOR: 9.62, 95% CI: 6.20, 14.92), and inappropriate protective clothing provision (AOR: 1.58, 95% CI: 1.27, 2.71). Conclusions: The burden of occupational heat exposure and heat-induced symptoms was high. Lack of reflective shields, the absence of enclosed extreme heat sources, a lack of access to shade, and inappropriate protective clothing provision were considerable attributes of heat stress. Therefore, the use of mechanical solutions to stop heat emissions at their sources and the key factors identified were areas for future intervention.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2018

The structure of the RC structure is actively reinforcing the structure of the building which has suffered from aging, artificial and natural damage of the building. Among various reinforcement methods, epoxy adhesive is used to attach FRP in FRP reinforcement method which is reinforcing by attaching FRP to the structural part. At this time, the epoxy adhesive having a low critical temperature has a sudden adhesive failure upon exposure to heat, and thus, the development of an inorganic fireproof adhesive having a high critical temperature has progressed. Therefore, in this study, the compositional change of inorganic fire - resistant adhesive exposed to high temperature heat was analyzed by XRD.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.290.1-290.1
• /
• 2016

Grapehen, a single atomic layer of graphite, has been in the spotlight and researched in vaious fields, because its fine mechanical, electrical properties, flexibility and transparence. Synthesis methods for large-area graphene such as chemical vaper deposition (CVD) and mechanical, chemical exfoliation have been reported. In particular, chemical exfoliation method receive attention due to low cost process. Chemical exfoliation method require reduction of graphene oxide in the process of exfoliation such as chemical reduction by strong reductant, thermal reduction on high temperature, and optical reduction via ultraviolet light exposure. Among these reduction methods, optical reduction is free from damage by strong reductant and high temperature. However, optical reduction is economically infeasible because the high cost of short-wavelength ultraviolet light sorce. In this paper, we make graphene-oxide and lanthanoid ion mixture aqueous solution which has highly optical absorbency in selective wevelength region. Sequentially, we synthesize reduced graphene oxide (RGO) using the solution and visible laser beam. Concretely, graphene oxide is made by modified hummer's method and mix with 1 ml each ultraviolet ray absorbent Gd3+ ion, Green laser absorbent Tb3+ ion, Red laser absorbent Eu3+ ion. After that, we revivify graphene oxide by laser exposure of 300 ~ 800 nm layser 1mW/cm2 +. We demonstrate reproducibility and repeatability of RGO through FT-IR, UV-VIS, Low temperature PL, SEM, XPS and electrical measurement.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.1-10
• /
• 2009

The safe and reliable performance of fusion and fission plants depends on the choice of suitable materials and an assessment of long-term materials degradation. These materials are degraded by their exposure to extreme conditions; it is necessary, therefore, to address the issue of long-term damage evolution of materials under service exposure in advanced plants. The empirical approach to the study of structural materials and fuels is reaching its limit when used to define and extrapolate new materials, new environments, or new operating conditions due to a lack of knowledge of the basic principles and mechanisms present. Materials designed for future Gen IV systems require significant innovation for the new environments that the materials will be exposed to. Thus, it is a challenge to understand the materials more precisely and to go far beyond the current empirical design methodology. Breakthrough technology is being achieved with the incorporation in design codes of a fundamental understanding of the properties of materials. This paper discusses the multi-scale, multi-code computations and multi-dimensional modelling undertaken to understand the mechanical properties of these materials. Such an approach is envisaged to probe beyond currently possible approaches to become a predictive tool in estimating the mechanical properties and lifetimes of materials.

• 전기학회논문지P
• /
• 제67권2호
• /
• pp.106-111
• /
• 2018

Recently, due to the effect of global warming, the high temperature phenomenon continues, and the time for workers exposed to high temperature, cold and infrared is increasing and then safety is threatened. Due to the nature of on-site work, the work is being carried out in an unreasonable manner due to the process, which is exposed to disasters due to high temperature and cold. Even though the injured skin may be damaged, the worker may not be aware of it and may be injured. By understanding the working environment of the worker and calculating the risk index and expressing it on the helmet, the surrounding colleagues inform the worker of the risk and take appropriate measures so that the accident can be prevented in advance. This study was conducted to investigate the effect of exposure duration on the workers' by measuring the exposure time, the risk index is displayed in the form of a traffic light to the helm, informing neighboring workers and managers, and transmitting to the workers by voice.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.179-183
• /
• 2005

In apply roof waterproof system using of synthetic high polymer sheet for rooftop measure physical performance (tension$\cdot$tearing ability, temperature relativity, heating stretch performance, junction performance, wind resistance test) by various test environment condition waterproof test of structure and performance of construction work aspect, present suitable form of construction work under these environment. Also, wish to improve durability of concrete structure as that examine in priority about adhesion method and joint junction method with waterproof out surface, and present new direction about roof system application of waterproofing method for rooftop.