• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.102-106
• /
• 2011

The transfer capability of HFC (Hybrid Fiber Coax) network is superior to xDSL. HFC network, however, is not suitable for transferring high quality video due to cable model interfaces. For the services of high quality IPIV or VOD, the extra exclusive downstream transfer system is required without upgrading pre-equipped cable modem and service capability. This paper is aimed to develop the extra exclusive downstream transfer system not changing existing cable modem system but providing same quality of services. This system is composed of the extra exclusive downstream IP-cable sender and modem. This sender and modem have 30 Mbps transfer capability and HDTV stream can be served in the Cable TV network using 21 Mbps HDTV transport stream.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1355-1359
• /
• 2004

The two way subscriber transmission systems have tendency to spread its carrier frequency bandwidth or information bit rate and average bit error rate according to popularization of high speed information through the digital communication system, transmission medium and the Internet. This fact is an important incentive to realize new systems. These two way subscriber transmission systems usually use same cable or same carrier frequency bandwidth for up stream channel and down stream channel. In the systems, the disturbances of noise, crosstalk or fading affect the characteristics. Specifically, these disturbances cause the decrease of information bit rate and degradation of transmission quality. This paper proposes the improved method of their degradations using the particular feature of two way subscriber transmission systems and it makes clear proposed method is effective by theoretically and some numerical examples.

• Journal of ILASS-Korea
• /
• v.1 no.2
• /
• pp.66-73
• /
• 1996

The present study investigates experimentally the characteristics of liquid jet, which is, the spray flow in the normal direction of the air stream under the flow conditions of air velocity $110\sim125m/s$. The present study adopts with the flow visualization technique using a short duration light bulb and the image processing analyse with CCD camera. Two types of injector were used: one is a flat plate type, and the other is backward facing step type, which height are 5, 8, 10mm. Dispersion of liquid jet can be represented by gray level of CCD camera. In the upstream of liquid jet, the backward facing step shows better liquid jet penetration. However, in the downstream. mean droplet size for backward facing step injector is smaller than that for flat plate injector

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.201-208
• /
• 2000

In the transmitter of optical communication systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 4:1 (4-channels) time-division multiplexer using SiGe HBT with emitter size of 2x8um2. The operation speed is 100bps, the rise and fall times of 20-80% are 34ps and 34ps, respectively and the dissipation of power is 1.50W.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.315-318
• /
• 2010

USN(Ubiquitous Sensor Network)기술이 다양한 분야에 적용하고 응용함으로서 센서 네트워크에서 발생하는 스트림 데이터를 효율적으로 처리하는 기술이 활발하게 연구되고 있다. 그리고 센서들에서 발생한 이기종 센서 스트림 데이터는 미들웨어의 메타데이터를 이용하여 센서 모니터링 환경의 상위 응용시스템에서 사용하기 적합한 센서 데이터로의 변환이 필요하다. 기존에 개발된 센서 데이터 처리 시스템에서는 동일한 노드나 지역에서 발생하는 센서 스트림 데이터에 대해서도 미들웨어에서의 불필요한 검색과 연산을 수행하기 때문에 본 논문에서는 캐쉬 테이블방식을 이용하여 중복적인 센서 스트림 데이터 처리의 수행을 줄일 수 있는 센서 스트림 데이터 처리 시스템의 설계를 제안한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.302-307
• /
• 2007

RFID를 기반으로 유비쿼터스 환경의 응용 서비스를 지원하는 미들웨어는 지속적으로 끊임없이 입력되는 데이터를 정확하게 실시간으로 처리하고 응용 서비스에서 질의하는 결과를 획득해서 전달하여야 한다. 이와 같은 지속적으로 입력되는 대량의 데이터 스트림을 처리하기 위해서 데이터 스트림 관리 시스템(Data Stream Management System: DSMS)을 개발하기 위한 연구가 진행되고 있다. 기존에 연구되는 데이터 스트림에 대한 알고리즘은 대부분 연속 질의 결과들 사이의 평균 오차를 줄이고, 부하 발생 시 데이터의 우선순위에 따라 버리는 것에 초점이 맞추어져 있다. 본 논문에서는 RFID EPC 라는 데이터 특성에 맞추어 다중버퍼를 이용함으로써 고속의 데이터 처리 능력을 얻고, 각 버퍼마다 일정한 규칙을 통해 질의에 있어서도 빠른 대응을 할 수 있는 알고리즘을 제안한다. 본 논문은 현재 DSMS의 관련 연구와 고속 데이터 처리의 필요성을 말하고, 제안하는 알고리즘 설명과 시뮬레이션을 통해 단일버퍼와 다중버퍼일 경우 데이터 처리 속도 성능 평가와 제안한 알고리즘에 맞도록 버퍼가 생성 되는지 테스트하는 것으로 구성된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.203-210
• /
• 2013

Majority of the wireless ad hoc routing protocols are proposed to find feasible routes without considering the network load, end-to-end link quality and bandwidth requirements of the application. Therefore, protocol may not provide sufficient quality of service (QoS) to a high speed traffic such as multimedia. In this paper, we propose a path-quality and bandwidth-estimation based routing protocol (PBBR) for the high quality multimedia stream that can meet the application's bandwidth requirements and find the best reliable route. The novelty of this protocol is to select a reliable path to respond the application's requirements based on available bandwidth at each intermediate node and end-to-end path loss ratio. Obtained results from the simulation demonstrates that our protocol can achieve sufficient performance in terms of throughput and end-to-end delay.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.307-312
• /
• 2002

Among the various zero suppression (ZS) algorithms used in a for synchronous stream cipher system, a ZS-2 exhibits certain good properties, including the omission of the block synchronization, easy implementation, etc., yet also a weakness in channel error propagation. Accordingly, This paper proposes a new method by minimizing the bit-wide substitution in the substitution blocks of ZS-2 to improve the degenerated error property in a noisy channel. As a result, the proposed ZS-3 algorithm can decrease the mean error propagation by about 18.7% over that of ZS-2 at n=8.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1210-1217
• /
• 2004

LILI-II stream cipher is an upgraded version of the LILI-128, one of candidates in NESSIE. Since the algorithm is a clock-controlled, the speed of the keystream data is degraded structurally in a clock-synchronized hardware logic design. Accordingly, this paper proposes a 4-bit parallel LFSR, where each register bit includes four variable data routines for feedback or shifting within the LFSR. furthermore, the timing of the proposed design is simulated using a Max+plus II from the ALTERA Co., the logic circuit is implemented for an FPGA device (EPF10K20RC240-3), and apply to the Lucent ASIC device (LV160C, 0.13${\mu}{\textrm}{m}$ CMOS ＆ 1.5v technology), and it could achieve a throughput of about 500 Mbps with a 0.13${\mu}{\textrm}{m}$ semiconductor for the maximum path delay below 1.8㎱. Finally, we propose the m-parallel implementation of LILI-II, throughput with 4, 8 or 16 Gbps (m=8, 16 or 32).