• 대한원격탐사학회지
• /
• 제14권3호
• /
• pp.262-276
• /
• 1998

The paper first describes the atmospheric correction algorithm for the Ocean Color and Temperature Scanner (OCTS) visible band data used at Earth Observation Center (EOC) of National Space Development Agenrr of japan (NASDA). It uses 10 candidate aerosol models including "Asian dust model" introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands where the reflectance of the water body can be discarded, the algorithm selects a pair of aerosol models that accounts best for the observed spectral reflectances to synthesize the aerosol reflectance in other bands. The paper also evaluates the performance of the algorithm by comparing the satellite estimates of water-leaving radiance and chlorophyll-a concentration with selected buoy- and ship-measured data. In comparison with the old CZCS-type atmospheric correction algorithm where the aerosol reflectance is assumed to be spectrally independent, the OCTS algorithm records factor 2-3 less error in estimating the normalized water-leaving radiances. In terms of chlorophyll-a concentration estimation, however, the accuracy stays very similar compared to that of the CZCS-type algorithm. This is considered to be due to the nature of in-water algorithm which relies on spectral ratio of water-leaving radiances.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.390-393
• /
• 2007

KOMPSAT-2, the first Korean high resolution earth observing satellite, continuously acquires high resolution images since July 2006. The quality of satellite images should be geometrically and radiometrically ensured before distribution to users. This study focused on absolute radiometric calibration which is a prerequisite procedure to ensure the radiometric quality of optical satellite images. In this study, we performed reflectance-based vicarious calibration methods on several uniform targets collected through several field campaigns in 2007. The radiative transfer model, MODTRAN, was used to estimate the amount of energy received at the sensor. The energy reached at the sensor are affected by several factors such as reflectance of targets, atmospheric condition, geometry condition between Sun and the sensor, etc. This study proposes the absolute radiometric calibration coefficients of KOMPSAT-2 MSC images combining several types of collected data through field works and tried to compare dynamic range of sensor-detected energy with other commercial high resolution sensors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.200-203
• /
• 2003

A study on the arc resistance and light reflectance of PTFE (polytetrafluoroethylene) nozzle for circuit breaker is presented. PTFE has been used widely as a material for circuit breaker nozzle. PTFE has excellent electrical resistivity, high melt viscosity, chemical inertness, heat resistance and low loss factor. PTFE melts at $327\;^{\circ}C$ but the viscosity is very high above the melting point. In the arcing environment in a circuit breaker, the fraction of the power is emitted out of the arc and reaches the nozzle wall by radiation, causing ablation at the surface and in the depth of the wall. Some fraction of the radiation power emitted out of the arc directly break up the chemical bonds at the surface while some fraction of the radiation power penetrates into the wall, heats up the material to evaporation temperature and causes damages deeper inside the volume of the nozzle. In this paper, some fillers that have endurance in the high temperature arc environment were added into PTFE. Adding some fillers into PTFE was expected to be efficient in improving the endurability against radiation. The light reflectance and arc resistance of PTFE composites were investigated.

• 대한원격탐사학회지
• /
• 제39권6_1호
• /
• pp.1427-1435
• /
• 2023

농업의 새로운 패러다임인 디지털 농업에서는 원격탐사 기법을 활용하여 작물 생육을 지속적으로 감시하며 해당 정보를 신속하게 디지털화 하고 있다. 이를 위해 선택적 파장 반사도 변화를 기반으로 한 식생지수가 널리 활용되고 있다. 그러나 식생 표면의 분광 산란·반사는 이방성을 보이기 때문에 광원인 태양의 위치와 관측 방향에 따라 반사도가 달라진다. 이는 식생지수 값이 작물의 실제 상태를 정확하게 반영하지 못하고 왜곡될 수 있다. 본 연구에서는 이방성 반사 특성 보정을 위해 bidirectional reflectance distribution function (BRDF) 앙상블 모델을 고해상도 Sentinel-2 위성 영상에 적용하고, normalized difference vegetation index (NDVI)와 2-band enhanced vegetation index (EVI2)를 산출하였다. BRDF 보정에 따라 산림에서 Red와 near-infrared (NIR) 밴드의 반사도가 대체로 증가하고, 농촌마을 및 농경지에서는 감소했다. 식생지수는 BRDF 보정 후에 산림지역 내에서의 지형 구분이 뚜렷해지고 논은 수확 유무에 따른 공간적 차이가 상승했다. 이는 EVI2보다 NDVI에서 그 차이가 컸다. 이러한 결과는 앞으로의 고해상도 위성 영상에서의 BRDF 모델 개발과 개선에 기여할 것으로 기대된다.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.201-207
• /
• 2018

Infrared(IR) heating has many advantages, such as energy efficiency, reduced heating time, cleanliness, equipment compactness, high drying rate and easy automation. These features of IR heating provide widely industrial applications, such as surface heat treatment in semiconductor fabrication, thermoforming of polymers, drying and disinfection of food products, heating to metal forging, and drying of wet materials. In this study, the characteristics of a protected gold mirror were examined by spectrophotometer and the lifetime of the coating layers were evaluated by a cross-cutting method and salt spray test. The effects of manufacturing conditions on the protected gold mirror were seen and remedies for these effects were noted in order to improve the properties of the protected gold mirror in the drying process. The reflectance and lifetime of the protected gold mirror was influenced by manufacturing conditions, such as surface roughness and forming conditions of the anti-oxide layer, the adhesion layer, the reflecting layer and the protection layer. The results of this study showed that the protected gold mirror manufactured using a buffing method for pre-treatment resulted in the most effective reflectance. In addition, $Al_2O_3$ coating on an Al substrate as an anti-oxide layer was more effective than the anodizing process in the test of reflectance. Furthermore, the protected gold mirror manufactured by layers forming of various materials resulted in the most effective reflectance and lifetime when coated with $Al_2O_3$ as the anti-oxide layer, coated Cr as the adhesion layer, and coated $MgF_2$ as the protection layer.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.237-242
• /
• 2012

At present, crystalline solar cells take up a significant percentage of the solar industry. The ways of increasing the efficiency of crystalline solar cell are texturing and AR(Anti-Reflection) coating, and the purpose of these technologies is to increase the amount of available light on the solar cell by reducing the reflectivity. The reflectance of crystalline silicon solar cell combined with such technologies will be able to predict using the proposed simulation in this paper. The simulation algorithm was made using MATLAB, and it is a combination of the theories of reflection in textured wafer and in anti-reflection coated wafer. The simulation results were divided into three wavelength band and were compared with actual reflectance measured by a spectrometer. The wavelength band from 300 to 380 was named ultraviolet region and the wavelength band from 380 to 780 is named visible region. Finally, the wavelength band from 780 to 1200 named infrared region. When compared with measured reflection data, the simulation results had a small error from 0.4 to 0.5[%] in visible region. The error occurred in the rest two regions is larger than visible region. The extreme error occurred the infrared region is due to internal reflection effect, but in the ultraviolet region, the rationale on reduction phenomenon of reflectance occurred in small range did not proved. If these problem will be solve, this simulation will have high reliability more than now and be able to predict the reflectance of solar cells.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.314-320
• /
• 1998

In this study, we have investigated crystallization properties of $Te_x(Sb_{85}Ge_{15})_{100-x}$ (x=0.3, 0.5, 1.0) thin films prepared by thermal evaporation. The change of reflectance according to phase change from amorphous to crystalline phases with annealing and exposure of diode laser is measured b the n&k analyzer and the surface morphology between amorphous and crystalline phase is analyzed by SEM and AFM. The difference in reflectance($\DeltaR$) between amorphous and crystalline phase appears approximately 20% at the diode laser wavelength, 780nm in all prepared films. Especially, the reflectance difference,$\DeltaR$ comes up to about 30% in $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ thin film. Also, amorphous-to-crystalline phase change is observed in all prepared films. As a result of the measurement of the reflectance using diode laser, the reflectance is increased in proportion to the laser power and exposure time in all films. As a result of observing each film with the SEM and AFM, the surface morphology of the annealed and the exposed films are evidently increased than those of as-deposited films. The fast crystallization is occurred by increasing in Te content. Therefore, we conclude that the $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ and $Te_1(Sb_{85}Ge_{15})_{99}$ thin films can be evaluated as an attractive optical recording medium with high contast ratio and fast erasing time due to crystallization.

• 대한원격탐사학회지
• /
• 제36권2_1호
• /
• pp.167-178
• /
• 2020

2015년 발사된 이후 KOMPSAT-3A 영상정보가 여러 분야에서 활용되고 있다. 그러나 실제 육상 환경의 분석에 필요한 지표 반사도를 얻을 수 있는 도구 개발이 이루어지지 않아서 식생 지수 산정 등과 같이 이러한 자료를 적용하는 과학적 분석과 응용 분야의 확산에는 한계가 있었다. 지표 반사도는 절대 대기 보정 처리 과정을 수행하여 얻어지는 성과물이다. 이 연구에서는 OTB 오픈 소스 확장 프로그램으로부터 KOMPSAT-3A 영상정보의 대기 반사도와 지표 반사도를 구하고, 국제 검보정 포털 RadCalNet에서 제공하는 대기 반사도와 지표 반사도 현장 측정 자료를 이용하여 정확도를 비교 검증하고자 한다. 또한 같은 지역의 Landsat-8 OLI 영상으로부터 지표 반사도를 구하고 비교 검증 실험에 같이 적용하였다. 검증 실험 결과로 KOMPSAT-3A 영상의 대기 반사도는 같은 분광대역에 해당하는 RadCalNet 자료의 평균값과 비교했을 때 0.00에서 1.00까지의 범위에서 최대 ± 0.02 차이가 보이는 것을 확인할 수 있었다. KOMPSAT-3A 영상의 지표 반사도 산출 결과는 RadCalNet 자료와 0.02에서 0.04까지의 차이 값을 갖는 높은 일치도를 보이는 것으로 나타났다. 이 결과들은 KOMPSAT-3A 영상의 분석대기자료(Analysis Ready Data)로서의 활용 가능성을 증가시키는 기본 자료로 사용할 수 있다. 또한 이 연구에서 개발된 도구와 연구 방법은 향후 국토, 농업, 산림 활용을 위한 차세대 중형 위성 영상자료의 각 센서 모델에 맞는 확장 프로그램 개발과 검증에도 적용이 가능할 것으로 생각한다.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.141-147
• /
• 2010

$Al_2O_3$, $TiO_2$, $HfO_2$와 같은 high-k (고 유전상수) 산화물 박막을 Si, $SiO_2$/Si, GaAs 기판에 각각 입혀서 주기적인 온도변화에 의해 발생되는 박막 표면에서의 반사율 변화를 이용한 열-반사율법을 이용하여 열전도도를 측정하였다. 그 결과, 약 50nm 두께에서 0.80~1.29 W/(mK)와 같은 높은 열전도도를 가지고 있어 CMOS와 메모리 디바이스와 같은 전자 회로에서 발생되는 열을 효과적으로 방산할 수 있고, 또 미세 입자의 크기에 따라 열전달이 변화하는 것을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.315-315
• /
• 2016

The hydrogenated amorphous silicon (a-Si:H) thin film solar cells using n/Al or n/Ag/Al back reflector have low short circuit current (Jsc) due to high absorption coefficients of Al or work function difference between n-layer and the metal. In this article, we utilized aluminum doped zinc oxide (AZO) to raise the internal reflectance for the improvement of short current density (Jsc) in a-Si:H thin film solar cells. It was found that there was a slight increase in the reflectance in the long wavelength range at the process temperature of 125oC due to improved crystalline quality of the AZO back reflector. The optical band gap (Eg) and work function were affected by the temperature and so did the internal reflectance. The increased internal reflectance within the solar cell resulted in Jsc of 14.94 mA/cm2 and the efficiency of 8.84%. Jsc for the cell without back reflector was 12.29 mA/cm2.